@@ -89,6 +89,7 @@ struct mmc_fixup {
#define CID_MANFID_MICRON 0x13
#define CID_MANFID_SAMSUNG 0x15
#define CID_MANFID_APACER 0x27
+#define CID_MANFID_SWISSBIT 0x5D
#define CID_MANFID_KINGSTON 0x70
#define CID_MANFID_HYNIX 0x90
#define CID_MANFID_KINGSTON_SD 0x9F
@@ -294,4 +295,9 @@ static inline int mmc_card_broken_sd_poweroff_notify(const struct mmc_card *c)
return c->quirks & MMC_QUIRK_BROKEN_SD_POWEROFF_NOTIFY;
}
+static inline int mmc_card_no_uhs_ddr50_tuning(const struct mmc_card *c)
+{
+ return c->quirks & MMC_QUIRK_NO_UHS_DDR50_TUNING;
+}
+
#endif
@@ -34,6 +34,16 @@ static const struct mmc_fixup __maybe_unused mmc_sd_fixups[] = {
MMC_QUIRK_BROKEN_SD_CACHE | MMC_QUIRK_BROKEN_SD_POWEROFF_NOTIFY,
EXT_CSD_REV_ANY),
+ /*
+ * Swissbit series S46-u cards throw I/O errors during tuning requests
+ * after the initial tuning request expectedly times out. This has
+ * only been observed on cards manufactured on 01/2019 that are using
+ * Bay Trail host controllers.
+ */
+ _FIXUP_EXT("0016G", CID_MANFID_SWISSBIT, 0x5342, 2019, 1,
+ 0, -1ull, SDIO_ANY_ID, SDIO_ANY_ID, add_quirk_sd,
+ MMC_QUIRK_NO_UHS_DDR50_TUNING, EXT_CSD_REV_ANY),
+
END_FIXUP
};
@@ -613,6 +613,29 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
return 0;
}
+/*
+ * Determine if the card should tune or not.
+ */
+static bool mmc_sd_use_tuning(struct mmc_card *card)
+{
+ /*
+ * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
+ * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
+ */
+ if (mmc_host_is_spi(card->host))
+ return false;
+
+ switch (card->host->ios.timing) {
+ case MMC_TIMING_UHS_SDR50:
+ case MMC_TIMING_UHS_SDR104:
+ return true;
+ case MMC_TIMING_UHS_DDR50:
+ return !mmc_card_no_uhs_ddr50_tuning(card);
+ }
+
+ return false;
+}
+
/*
* UHS-I specific initialization procedure
*/
@@ -656,14 +679,7 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
if (err)
goto out;
- /*
- * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
- * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
- */
- if (!mmc_host_is_spi(card->host) &&
- (card->host->ios.timing == MMC_TIMING_UHS_SDR50 ||
- card->host->ios.timing == MMC_TIMING_UHS_DDR50 ||
- card->host->ios.timing == MMC_TIMING_UHS_SDR104)) {
+ if (mmc_sd_use_tuning(card)) {
err = mmc_execute_tuning(card);
/*
@@ -329,6 +329,7 @@ struct mmc_card {
#define MMC_QUIRK_BROKEN_SD_CACHE (1<<15) /* Disable broken SD cache support */
#define MMC_QUIRK_BROKEN_CACHE_FLUSH (1<<16) /* Don't flush cache until the write has occurred */
#define MMC_QUIRK_BROKEN_SD_POWEROFF_NOTIFY (1<<17) /* Disable broken SD poweroff notify support */
+#define MMC_QUIRK_NO_UHS_DDR50_TUNING (1<<18) /* Disable DDR50 tuning */
bool written_flag; /* Indicates eMMC has been written since power on */
bool reenable_cmdq; /* Re-enable Command Queue */
Adds the MMC_QUIRK_NO_UHS_DDR50_TUNING quirk and updates mmc_execute_tuning() to return 0 if that quirk is set. This fixes an issue on certain Swissbit SD cards that do not support DDR50 tuning where tuning requests caused I/O errors to be thrown. Signed-off-by: Erick Shepherd <erick.shepherd@ni.com> --- drivers/mmc/core/card.h | 6 ++++++ drivers/mmc/core/quirks.h | 10 ++++++++++ drivers/mmc/core/sd.c | 32 ++++++++++++++++++++++++-------- include/linux/mmc/card.h | 1 + 4 files changed, 41 insertions(+), 8 deletions(-)