diff mbox

[v5,12/13] arm64: allwinner: a64: add UART1 pin nodes

Message ID 5141797c4627d1d152f02dd3b43e7c5fef996ef6.1485553113.git-series.maxime.ripard@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard Jan. 27, 2017, 9:38 p.m. UTC 
From: Andre Przywara <andre.przywara@arm.com>

On many boards UART1 connects to a Bluetooth chip, so add the pinctrl
nodes for the only pins providing access to that UART. That includes
those pins for hardware flow control (RTS/CTS).

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 9ae4f589fb1c..1c64ea2d23f9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -275,6 +275,16 @@ 
 				pins = "PB8", "PB9";
 				function = "uart0";
 			};
+
+			uart1_pins: uart1_pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			uart1_rts_cts_pins: uart1_rts_cts_pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
 		};
 
 		uart0: serial@1c28000 {