From patchwork Fri Feb 12 09:49:36 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Adrian Hunter X-Patchwork-Id: 8289811 Return-Path: X-Original-To: patchwork-linux-mmc@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 72BA2BEEE5 for ; Fri, 12 Feb 2016 09:53:24 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id DC14C203AC for ; Fri, 12 Feb 2016 09:53:22 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 2C555203E3 for ; Fri, 12 Feb 2016 09:53:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751220AbcBLJxT (ORCPT ); Fri, 12 Feb 2016 04:53:19 -0500 Received: from mga03.intel.com ([134.134.136.65]:42682 "EHLO mga03.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751046AbcBLJxH (ORCPT ); Fri, 12 Feb 2016 04:53:07 -0500 Received: from fmsmga003.fm.intel.com ([10.253.24.29]) by orsmga103.jf.intel.com with ESMTP; 12 Feb 2016 01:53:06 -0800 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.22,435,1449561600"; d="scan'208";a="651142392" Received: from ahunter-desktop.fi.intel.com (HELO [10.237.72.168]) ([10.237.72.168]) by FMSMGA003.fm.intel.com with ESMTP; 12 Feb 2016 01:53:04 -0800 Subject: Re: [PATCH v4 00/25] MMC/SDHCI fixes To: Ulf Hansson , Russell King - ARM Linux References: <20160129094324.GA20025@n2100.arm.linux.org.uk> Cc: Gregory CLEMENT , linux-mmc , Marcin Wojtas , Shawn Guo , Sascha Hauer From: Adrian Hunter Organization: Intel Finland Oy, Registered Address: PL 281, 00181 Helsinki, Business Identity Code: 0357606 - 4, Domiciled in Helsinki Message-ID: <56BDAAB0.6010209@intel.com> Date: Fri, 12 Feb 2016 11:49:36 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.5.1 MIME-Version: 1.0 In-Reply-To: Sender: linux-mmc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org X-Spam-Status: No, score=-7.0 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP On 04/02/16 12:55, Ulf Hansson wrote: > + Adrian > > On 29 January 2016 at 10:43, Russell King - ARM Linux > wrote: >> On Mon, Dec 21, 2015 at 11:39:56AM +0000, Russell King - ARM Linux wrote: >>> This all started with a report from an iMX6 Hummingboard user that >>> they were seeing regular "mmc0: Got data interrupt 0x00000002 even >>> though no data operation was in progress." messages with 4.4-rc and >>> additional patches to enable UHS support in DT for the platform. >>> >>> When I tested 4.4-rc on an iMX6 Hummingboard with UHS support enabled, >>> I found several other issues. This patch series addresses some of >>> the issues. >>> >>> However, while testing on Armada 388, an issue was found there, and >>> a fix is also included in this patch set, however it does not depend >>> on the rest of the patch series. >>> >>> We all know that the SDHCI driver is in poor state, and Ulf's desire >>> to see it turned into a library (which actually comes from myself.) >>> However, with the driver in such a poor state, it makes sense to fix >>> a few of the issues first, especially if they result in the code >>> shrinking - which they do. >>> >>> However, given what I've found below, I have to wonder how many of the >>> quirks that we have in this driver are down to the poor code rather than >>> real hardware problems: how many of them are due to poorly investigated >>> bugs. >>> >>> This series starts off by shutting up some kernel messages that should >>> not be verbose: >>> - the voltage-ranges DT property is optional, so we should not print >>> a message saying that it's missing from DT. That suggests it isn't >>> optional. As no ill effect comes from not specifying it, I've >>> dropped this message to debug level. >>> >>> - reworking the voltage-ranges code so that callers know whether the >>> optional voltage-ranges property was specified. >>> >>> - "retrying because a re-tune was needed" - a re-tune is something that >>> is part of the higher speed SD specs, and it's required to happen >>> periodically. So it's expected and normal behaviour. There's no need >>> to print this to the kernel log. >>> >>> - When tuning fails, rather than a bland "mmc0: tuning execution failed" >>> message, print the error code so that we can see what the reason for >>> the failure is. MMC fails on this point in many places. >>> >>> - Move the initialisation of the command ->error member. It looks to >>> me as if this is not required; mmc_start_request() does this already, >>> as it seems the rest of the MMC core does too. Maybe this should be >>> removed altogether? >>> >>> - Testing error bits, then setting the error, then testing the error >>> value, and completing the command is a very lengthy way to deal with >>> errors here. Test the error bits, and then decide what error occurred >>> before completing. (This code is actually buggy, see the next change). >>> >>> - If a command _response_ CRC error occurs, we can't be certain whether >>> the card received the command successfully, and has started processing >>> it. If it has, and it results in data being read from the card, the >>> card will enter data transfer state, and start sending data to the >>> host. Therefore, it is completely wrong to blindly terminate the >>> command, especially when such termination fails to clean _anything_ >>> up - eg, it leaves DMA in place so the host can continue DMAing to the >>> memory, and it leaves buffers DMA mapped - which eventually annoys the >>> DMA API debugging. Fix this by assuming that a CRC error is a receive >>> side error. If the card did not correctly receive the command, it >>> will not initiate a data transfer, and we should time out after the >>> card specified timeout. >>> >>> With the unmodified mainline code, even if we reset the state machines >>> when finishing a request in error, the _card_ itself may well still be >>> in data transfer mode when this happens. How can we be sure what state >>> the data side is actually in? Could this be why (eg) sdhci-esdhc-imx.c >>> has this: >>> >>> /* FIXME: delay a bit for card to be ready for next tuning due to errors */ >>> mdelay(1); >>> >>> And how many more such _hacks_ are working around similar problems? >>> >>> - The unaligned buffer handling is a total waste of resources in its >>> current form. We DMA map, sync, and unmap it on every transfer, >>> whether the buffer is used or not. For MMC/SD transfers, these will >>> be coming from the VFS/MM layers, which operate through the page >>> cache - hence the vast majority of buffers will be page aligned. >>> Performance measurements on iMX6 show that this additional DMA >>> maintanence is responsible for a 10% reduction in read transfer >>> performance. Switch this to use a DMA coherent mapping instead, which >>> needs no DMA maintanence. >>> >>> - sdhci_adma_table_post() is badly coded: we walk the scatterlist >>> looking for any buffers which might not be aligned (which can be a >>> rare event, see above) and then we only do something if we find an >>> unaligned buffer _and_ it's a read transfer. So for a write transfer, >>> this scatterlist walking is a total waste of CPU cycles. Testing the >>> transfer direction is much cheaper than walking the scatterlist. >>> Re-organise the code to do the cheap test first. >>> >>> - There are two paths to identical DMA unmapping code (the code around >>> dma_unmap_sg()) in sdhci_finish_data() and its child function >>> sdhci_adma_table_post(). Trivially simplify this duplication. >>> >>> - Move sdhci_pre_dma_transfer() so we avoid needing to declare it. >>> >>> - Do the same thing with sdhci_prepare_data() and sdhci_pre_dma_transfer() >>> as with sdhci_finish_data() and sdhci_adma_table_post(). >>> >>> - Fix the mess that is the data segment host_cookie handling. The >>> existing code seems like a candidate for the obfuscated coding prize! >>> Four patches address this, turning it into something much easier to >>> understand, which then allows (finally)... >>> >>> - The DMA API leak which occurs when we have mapped the DMA buffers in >>> sdhci_prepare_data() and an error occurs early on in the processing >>> of a request. >>> >>> - A change (mentioned above) which fixes a prior commit for Armada 38x >>> using sdhci-pxav3.c, found while trying to get the higher speed modes >>> working on these SoCs. Clearly the existing code is broken, this at >>> least resolves some of the breakage by allowing the correct high-order >>> SDHCI capabilities through. >>> >>> - Fixing another DMA API leak with the pre/post request handling, where >>> a current request can change the state of the SDHCI_REQ_USE_DMA, and >>> thus stop a mapped request being unmapped. >>> >>> - Fixing the SDHCI timeout calculation code to correctly round timeouts >>> up rather than down, and correctly calculate the time (in microseconds) >>> for a certain number of card clocks. >>> >>> - Consolidating the SDHCI address/size alignment handling so we only walk >>> the scatterlist once instead of twice. >>> >>> Further patches are necessary as there are still a number of observable >>> problems when using this driver on iMX6 with UHS cards. Patches up to >>> and including "mmc: sdhci: further fix for DMA unmapping in >>> sdhci_post_req()" should be considered for inclusion in the stable >>> kernel trees. >>> >>> I've tested these changes on iMX6 at UHS speeds, and Armada 388 SoCs >>> at HS speeds so far. Others should test them. >> >> One comment from Adrian addressed. >> >> drivers/mmc/card/block.c | 4 +- >> drivers/mmc/core/core.c | 17 +- >> drivers/mmc/host/sdhci-pxav3.c | 6 +- >> drivers/mmc/host/sdhci.c | 444 ++++++++++++++++++----------------------- >> drivers/mmc/host/sdhci.h | 4 +- >> 5 files changed, 213 insertions(+), 262 deletions(-) >> >> -- >> RMK's Patch system: http://www.arm.linux.org.uk/developer/patches/ >> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up >> according to speedtest.net. > > I have applied patch 1 to 4, for next! > > The rest are sdhci patches, which from now on needs acks from Adrian > for me to pick them up. I have taken the liberty of re-organizing Russell's patches to put the bug fixes first with stable cc's. I also did 2 tweaks which result in final code having the diff below to the original: Where I have made changes, they are indicated in the patch commit. I did some basic testing of eMMC, SD card and SDIO, for the fixes alone and also the entire patch set. Russell, please let me know if this is OK, and if so, Ulf please consider pulling: The following changes since commit 7d9e20d2be0d836c4eb7afca901eced34274c8dd: Merge branch 'fixes' into next (2016-02-08 16:22:56 +0100) are available in the git repository at: git://git.infradead.org/users/ahunter/linux-sdhci.git master for you to fetch changes up to eb6bf3c3513d2e2ab77d86bc6c2f2755073f0745: mmc: sdhci: further code simplication (2016-02-11 16:24:46 +0200) ---------------------------------------------------------------- Russell King (22): mmc: sdhci: move initialisation of command error member mmc: sdhci: clean up command error handling mmc: sdhci: fix command response CRC error handling mmc: sdhci: avoid unnecessary mapping/unmapping of align buffer mmc: sdhci: plug DMA mapping leak on error mmc: sdhci-pxav3: fix higher speed mode capabilities mmc: sdhci: further fix for DMA unmapping in sdhci_post_req() mmc: sdhci: fix data timeout (part 1) mmc: sdhci: fix data timeout (part 2) mmc: sdhci: allocate alignment and DMA descriptor buffer together mmc: sdhci: clean up coding style in sdhci_adma_table_pre() mmc: sdhci: avoid walking SG list for writes mmc: sdhci: factor out common DMA cleanup in sdhci_finish_data() mmc: sdhci: move sdhci_pre_dma_transfer() mmc: sdhci: factor out sdhci_pre_dma_transfer() from sdhci_adma_table_pre() mmc: sdhci: pass the cookie into sdhci_pre_dma_transfer() mmc: sdhci: always unmap a mapped data transfer in sdhci_post_req() mmc: sdhci: clean up host cookie handling mmc: sdhci: cleanup DMA un-mapping mmc: sdhci: prepare DMA address/size quirk handling consolidation mmc: sdhci: consolidate the DMA/ADMA size/address quicks mmc: sdhci: further code simplication drivers/mmc/host/sdhci-pxav3.c | 6 ++- drivers/mmc/host/sdhci.c | 444 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------------------------------- drivers/mmc/host/sdhci.h | 4 +- 3 files changed, 200 insertions(+), 254 deletions(-) Regards Adrian --- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index f857cb2a3d05..03fbb36580f7 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2270,7 +2270,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask) * will time out. */ if (host->cmd->data && - intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT) == + (intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)) == SDHCI_INT_CRC) { host->cmd = NULL; return; @@ -2920,7 +2920,8 @@ int sdhci_add_host(struct sdhci_host *host) pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n", mmc_hostname(mmc)); host->flags &= ~SDHCI_USE_ADMA; - } else if (dma & SDHCI_ADMA2_MASK) { + } else if ((dma + host->align_buffer_sz) & + (SDHCI_ADMA2_DESC_ALIGN - 1)) { pr_warn("%s: unable to allocate aligned ADMA descriptor\n", mmc_hostname(mmc)); host->flags &= ~SDHCI_USE_ADMA;