diff mbox

mmc/sdio: utilize runtime PM to speed up SDIO card's resume process

Message ID 570DEA5D.8070708@linux.intel.com
State New
Headers show

Commit Message

Fu, Zhonghui April 13, 2016, 6:42 a.m. UTC
Leave some work of SDIO card's resume process into it's runtime resume
process to shorten system resume latency.

Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
---
 drivers/mmc/core/sdio.c  |   21 ++++++++++-----------
 include/linux/mmc/host.h |    9 ++++++---
 2 files changed, 16 insertions(+), 14 deletions(-)

-- 1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Fu, Zhonghui April 18, 2016, 3:59 a.m. UTC | #1
Any comments are welcome.


Thanks,
Zhonghui

On 4/13/2016 2:42 PM, Fu, Zhonghui wrote:
> Leave some work of SDIO card's resume process into it's runtime resume
> process to shorten system resume latency.
>
> Signed-off-by: Zhonghui Fu <zhonghui.fu@linux.intel.com>
> ---
>  drivers/mmc/core/sdio.c  |   21 ++++++++++-----------
>  include/linux/mmc/host.h |    9 ++++++---
>  2 files changed, 16 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
> index bd44ba8..fe5d3c5 100644
> --- a/drivers/mmc/core/sdio.c
> +++ b/drivers/mmc/core/sdio.c
> @@ -902,6 +902,10 @@ static int mmc_sdio_suspend(struct mmc_host *host)
>  
>  	if (!mmc_card_keep_power(host)) {
>  		mmc_power_off(host);
> +		if (host->caps & MMC_CAP_POWER_OFF_CARD) {
> +			pm_runtime_disable(&host->card->dev);
> +			pm_runtime_set_suspended(&host->card->dev);
> +		}
>  	} else if (host->retune_period) {
>  		mmc_retune_timer_stop(host);
>  		mmc_retune_needed(host);
> @@ -924,18 +928,16 @@ static int mmc_sdio_resume(struct mmc_host *host)
>  
>  	/* Restore power if needed */
>  	if (!mmc_card_keep_power(host)) {
> -		mmc_power_up(host, host->card->ocr);
>  		/*
> -		 * Tell runtime PM core we just powered up the card,
> -		 * since it still believes the card is powered off.
>  		 * Note that currently runtime PM is only enabled
>  		 * for SDIO cards that are MMC_CAP_POWER_OFF_CARD
>  		 */
>  		if (host->caps & MMC_CAP_POWER_OFF_CARD) {
> -			pm_runtime_disable(&host->card->dev);
> -			pm_runtime_set_active(&host->card->dev);
>  			pm_runtime_enable(&host->card->dev);
> +			goto out;
>  		}
> +
> +		mmc_power_up(host, host->card->ocr);
>  	}
>  
>  	/* No need to reinitialize powered-resumed nonremovable cards */
> @@ -953,13 +955,10 @@ static int mmc_sdio_resume(struct mmc_host *host)
>  		err = sdio_enable_4bit_bus(host->card);
>  	}
>  
> -	if (!err && host->sdio_irqs) {
> -		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
> -			wake_up_process(host->sdio_irq_thread);
> -		else if (host->caps & MMC_CAP_SDIO_IRQ)
> -			host->ops->enable_sdio_irq(host, 1);
> -	}
> +	if (!err && host->sdio_irqs)
> +		mmc_signal_sdio_irq(host);
>  
> +out:
>  	mmc_release_host(host);
>  
>  	host->pm_flags &= ~MMC_PM_KEEP_POWER;
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 8dd4d29..8faaa5b 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -400,10 +400,13 @@ void mmc_request_done(struct mmc_host *, struct mmc_request *);
>  
>  static inline void mmc_signal_sdio_irq(struct mmc_host *host)
>  {
> -	host->ops->enable_sdio_irq(host, 0);
> -	host->sdio_irq_pending = true;
> -	if (host->sdio_irq_thread)
> +	if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
> +		host->ops->enable_sdio_irq(host, 0);
> +		host->sdio_irq_pending = true;
>  		wake_up_process(host->sdio_irq_thread);
> +	} else if (host->caps & MMC_CAP_SDIO_IRQ) {
> +		host->ops->enable_sdio_irq(host, 1);
> +	}
>  }
>  
>  void sdio_run_irqs(struct mmc_host *host);
> -- 1.7.1
>

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index bd44ba8..fe5d3c5 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -902,6 +902,10 @@  static int mmc_sdio_suspend(struct mmc_host *host)
 
 	if (!mmc_card_keep_power(host)) {
 		mmc_power_off(host);
+		if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+			pm_runtime_disable(&host->card->dev);
+			pm_runtime_set_suspended(&host->card->dev);
+		}
 	} else if (host->retune_period) {
 		mmc_retune_timer_stop(host);
 		mmc_retune_needed(host);
@@ -924,18 +928,16 @@  static int mmc_sdio_resume(struct mmc_host *host)
 
 	/* Restore power if needed */
 	if (!mmc_card_keep_power(host)) {
-		mmc_power_up(host, host->card->ocr);
 		/*
-		 * Tell runtime PM core we just powered up the card,
-		 * since it still believes the card is powered off.
 		 * Note that currently runtime PM is only enabled
 		 * for SDIO cards that are MMC_CAP_POWER_OFF_CARD
 		 */
 		if (host->caps & MMC_CAP_POWER_OFF_CARD) {
-			pm_runtime_disable(&host->card->dev);
-			pm_runtime_set_active(&host->card->dev);
 			pm_runtime_enable(&host->card->dev);
+			goto out;
 		}
+
+		mmc_power_up(host, host->card->ocr);
 	}
 
 	/* No need to reinitialize powered-resumed nonremovable cards */
@@ -953,13 +955,10 @@  static int mmc_sdio_resume(struct mmc_host *host)
 		err = sdio_enable_4bit_bus(host->card);
 	}
 
-	if (!err && host->sdio_irqs) {
-		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
-			wake_up_process(host->sdio_irq_thread);
-		else if (host->caps & MMC_CAP_SDIO_IRQ)
-			host->ops->enable_sdio_irq(host, 1);
-	}
+	if (!err && host->sdio_irqs)
+		mmc_signal_sdio_irq(host);
 
+out:
 	mmc_release_host(host);
 
 	host->pm_flags &= ~MMC_PM_KEEP_POWER;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 8dd4d29..8faaa5b 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -400,10 +400,13 @@  void mmc_request_done(struct mmc_host *, struct mmc_request *);
 
 static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 {
-	host->ops->enable_sdio_irq(host, 0);
-	host->sdio_irq_pending = true;
-	if (host->sdio_irq_thread)
+	if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
+		host->ops->enable_sdio_irq(host, 0);
+		host->sdio_irq_pending = true;
 		wake_up_process(host->sdio_irq_thread);
+	} else if (host->caps & MMC_CAP_SDIO_IRQ) {
+		host->ops->enable_sdio_irq(host, 1);
+	}
 }
 
 void sdio_run_irqs(struct mmc_host *host);