| Message ID | 6AAC67C8-1C8F-4F15-9CED-5BA83CA21C39@marvell.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jul 7, 2011 at 12:08 AM, Philip Rakity <prakity@marvell.com> wrote: > Eric, > > Not sure what to suggest. > > If it makes more sense to take V3 which powers on the wifi card but does not do power handling per > new spec take that. At least wifi card works and then wait for power code. New code could delete > power code as part of the mod. > > If it makes more sense to wait for power code -- take V4. > No worries. I'll wait for v4. > Philip > > > > > V4 > == > remove code to enable power for wifi. Coming in separate patch > (by others) that conforms to new power architecture. > > V3 > == > Change since V2 -- delete mmc3 since it was committed > to linux next. > > enable mmc1 used for wifi (8688) and marked PERMANENT. > Wifi requires enabling of power on the device by > toggling the gpio lines for power and reset. > > Signed-off-by: Philip Rakity <prakity@marvell.com> > --- > arch/arm/mach-mmp/brownstone.c | 8 +++++++- > 1 files changed, 7 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c > index c79162a..7634b2f 100644 > --- a/arch/arm/mach-mmp/brownstone.c > +++ b/arch/arm/mach-mmp/brownstone.c > @@ -180,6 +180,11 @@ static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { > .clk_delay_cycles = 0x1f, > }; > > +static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc1 = { > + .clk_delay_cycles = 0x1f, > + .flags = PXA_FLAG_CARD_PERMANENT, > +}; > + > static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = { > .clk_delay_cycles = 0x1f, > .flags = PXA_FLAG_CARD_PERMANENT > @@ -195,8 +200,9 @@ static void __init brownstone_init(void) > mmp2_add_uart(1); > mmp2_add_uart(3); > mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); > - mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ > mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */ > + mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ > + mmp2_add_sdhost(1, &mmp2_sdh_platdata_mmc1); /* Wifi */ > > /* enable 5v regulator */ > platform_device_register(&brownstone_v_5vp_device); > -- > 1.7.0.4 > > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index c79162a..7634b2f 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -180,6 +180,11 @@ static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { .clk_delay_cycles = 0x1f, }; +static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc1 = { + .clk_delay_cycles = 0x1f, + .flags = PXA_FLAG_CARD_PERMANENT, +}; + static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = { .clk_delay_cycles = 0x1f, .flags = PXA_FLAG_CARD_PERMANENT @@ -195,8 +200,9 @@ static void __init brownstone_init(void) mmp2_add_uart(1); mmp2_add_uart(3); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); - mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */ + mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ + mmp2_add_sdhost(1, &mmp2_sdh_platdata_mmc1); /* Wifi */ /* enable 5v regulator */ platform_device_register(&brownstone_v_5vp_device);
Eric, Not sure what to suggest. If it makes more sense to take V3 which powers on the wifi card but does not do power handling per new spec take that. At least wifi card works and then wait for power code. New code could delete power code as part of the mod. If it makes more sense to wait for power code -- take V4. Philip V4 == remove code to enable power for wifi. Coming in separate patch (by others) that conforms to new power architecture. V3 == Change since V2 -- delete mmc3 since it was committed to linux next. enable mmc1 used for wifi (8688) and marked PERMANENT. Wifi requires enabling of power on the device by toggling the gpio lines for power and reset. Signed-off-by: Philip Rakity <prakity@marvell.com> --- arch/arm/mach-mmp/brownstone.c | 8 +++++++- 1 files changed, 7 insertions(+), 1 deletions(-)