diff mbox

When bus width detection procedure takes place, kernel cannot lock on correct bus width

Message ID 87txnmnl3j.fsf@octavius.laptop.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chris Ball April 4, 2013, 7:37 p.m. UTC 
From: Philip Rakity <prakity@yahoo.com>
Subject: [PATCH] mmc: core: Fix bit width test failing on old eMMC cards

PARTITION_SUPPORT needs to be set before doing the compare on version
number so the bit width test does not get invalid data.  Before this
patch, a Sandisk iNAND eMMC card would detect 1-bit width although
the hardware supports 4-bit.

Only affects old emmc devices - pre 4.4 devices.

Reported-by: Elad Yi <elad.yi@gmail.com>
Signed-off-by: Philip Rakity <prakity@yahoo.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/core/mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index d584f7c..0cbd1ef 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -369,13 +369,13 @@  static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 		ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
 	card->ext_csd.raw_trim_mult =
 		ext_csd[EXT_CSD_TRIM_MULT];
+	card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
 	if (card->ext_csd.rev >= 4) {
 		/*
 		 * Enhanced area feature support -- check whether the eMMC
 		 * card has the Enhanced area enabled.  If so, export enhanced
 		 * area offset and size to user by adding sysfs interface.
 		 */
-		card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
 		if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
 		    (ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
 			hc_erase_grp_sz =