From b49462b85bdc8f81cc074079fa768d53d8653cb1 Mon Sep 17 00:00:00 2001
From: Zhangfei Gao <zhangfei.gao@marvell.com>
Date: Mon, 20 Sep 2010 10:51:28 -0400
Subject: [PATCH] mmc: add support of sdhci-pxa driver
Support Marvell PXA168/PXA910/MMP2 SD Host Controller
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
---
arch/arm/plat-pxa/include/plat/sdhci.h | 32 ++++
drivers/mmc/host/Kconfig | 12 ++
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-pxa.c | 260 ++++++++++++++++++++++++++++++++
4 files changed, 305 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-pxa/include/plat/sdhci.h
create mode 100644 drivers/mmc/host/sdhci-pxa.c
new file mode 100644
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-pxa/include/plat/sdhci.h
+ *
+ * Copyright 2010 Marvell
+ * Zhangfei Gao <zhangfei.gao@marvell.com>
+ *
+ * PXA Platform - SDHCI platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_PXA_SDHCI_H
+#define __PLAT_PXA_SDHCI_H __FILE__
+
+/* pxa specific quirks */
+/* Card alwayes wired to host, like emmc */
+#define PXA_QUIRK_BROKEN_CARD_DETECTION (1<<0)
+/* Require clock free running */
+#define PXA_QUIRK_DISABLE_CLOCK_GATING (1<<1)
+
+/**
+ * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
+ * @max_speed: The maximum speed supported.
+ * @pxa_quirks: specific quirk of pxa
+*/
+struct sdhci_pxa_platdata {
+ unsigned int max_speed;
+ unsigned int pxa_quirk;
+};
+
+#endif /* __PLAT_PXA_SDHCI_H */
@@ -158,6 +158,18 @@ config MMC_SDHCI_S3C
If unsure, say N.
+config MMC_SDHCI_PXA
+ tristate "Marvell PXA168/PXA910/MMP2 SD Host Controller support"
+ depends on ARCH_PXA || ARCH_MMP
+ select MMC_SDHCI
+ select MMC_SDHCI_IO_ACCESSORS
+ help
+ This selects the Marvell(R) PXA168/PXA910/MMP2 SD Host Controller.
+ If you have a PXA168/PXA910/MMP2 platform with SD Host Controller and a
+ card slot,say Y or M here.
+
+ If unsure, say N.
+
config MMC_SDHCI_SPEAR
tristate "SDHCI support on ST SPEAr platform"
depends on MMC_SDHCI && PLAT_SPEAR
@@ -13,6 +13,7 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_MV) += sdhci-mv.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
+obj-$(CONFIG_MMC_SDHCI_PXA) += sdhci-pxa.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
new file mode 100644
@@ -0,0 +1,260 @@
+/* linux/drivers/mmc/host/sdhci-pxa.c
+ *
+ * Copyright 2010 Marvell
+ * Zhangfei Gao <zhangfei.gao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* Supports:
+ * SDHCI support for MMP2/PXA910/PXA168
+ *
+ * Based on sdhci-platfm.c
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <plat/sdhci.h>
+#include "sdhci.h"
+
+#define DRIVER_NAME "sdhci-pxa"
+
+#define SD_FIFO_PARAM 0x104
+#define DIS_PAD_SD_CLK_GATE 0x400
+
+struct sdhci_pxa {
+ struct sdhci_host *host;
+ struct sdhci_pxa_platdata *pdata;
+ struct clk *clk;
+ struct resource *res;
+
+ u8 clk_enable;
+};
+
+/*****************************************************************************\
+ * *
+ * SDHCI core callbacks *
+ * *
+\*****************************************************************************/
+static void set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pxa *pxa = sdhci_priv(host);
+ u32 tmp = 0;
+
+ if (clock == 0) {
+ if (pxa->clk_enable) {
+ clk_disable(pxa->clk);
+ pxa->clk_enable = 0;
+ }
+ } else {
+ if (0 == pxa->clk_enable) {
+ if (pxa->pdata->pxa_quirk
+ & PXA_QUIRK_DISABLE_CLOCK_GATING) {
+ tmp = readl(host->ioaddr + SD_FIFO_PARAM);
+ tmp |= DIS_PAD_SD_CLK_GATE;
+ writel(tmp, host->ioaddr + SD_FIFO_PARAM);
+ }
+ clk_enable(pxa->clk);
+ pxa->clk_enable = 1;
+ }
+ }
+}
+
+static struct sdhci_ops sdhci_pxa_ops = {
+ .set_clock = set_clock,
+};
+
+/*****************************************************************************\
+ * *
+ * Device probing/removal *
+ * *
+\*****************************************************************************/
+
+static int __devinit sdhci_pxa_probe(struct platform_device *pdev)
+{
+ struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct sdhci_host *host = NULL;
+ struct resource *iomem = NULL;
+ struct sdhci_pxa *pxa = NULL;
+ int ret, irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "no irq specified\n");
+ return irq;
+ }
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem) {
+ dev_err(dev, "no memory specified\n");
+ return -ENOENT;
+ }
+
+ host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pxa));
+ if (IS_ERR(host)) {
+ dev_err(dev, "failed to alloc host\n");
+ ret = PTR_ERR(host);
+ goto out;
+ }
+
+ pxa = sdhci_priv(host);
+ pxa->host = host;
+ pxa->pdata = pdata;
+ pxa->clk_enable = 0;
+
+ pxa->clk = clk_get(dev, "PXA-SDHCLK");
+ if (IS_ERR(pxa->clk)) {
+ dev_err(dev, "failed to get io clock\n");
+ ret = PTR_ERR(pxa->clk);
+ goto out;
+ }
+
+ pxa->res = request_mem_region(iomem->start, resource_size(iomem),
+ mmc_hostname(host->mmc));
+ if (!pxa->res) {
+ dev_err(&pdev->dev, "cannot request region\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+ if (!host->ioaddr) {
+ dev_err(&pdev->dev, "failed to remap registers\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ host->hw_name = "MMC";
+ host->ops = &sdhci_pxa_ops;
+ host->irq = irq;
+ host->quirks = SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+ if (pdata->pxa_quirk & PXA_QUIRK_BROKEN_CARD_DETECTION)
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+ ret = sdhci_add_host(host);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add host\n");
+ goto out;
+ }
+
+ if (pxa->pdata->max_speed)
+ host->mmc->f_max = pxa->pdata->max_speed;
+
+ platform_set_drvdata(pdev, host);
+
+ return 0;
+out:
+ if (host) {
+ if (host->ioaddr)
+ iounmap(host->ioaddr);
+ if (pxa->res)
+ release_mem_region(pxa->res->start,
+ resource_size(pxa->res));
+ sdhci_free_host(host);
+ }
+
+ return ret;
+}
+
+static int __devexit sdhci_pxa_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pxa *pxa = sdhci_priv(host);
+ int dead = 0;
+ u32 scratch;
+
+ if (host) {
+ scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
+ if (scratch == (u32)-1)
+ dead = 1;
+
+ sdhci_remove_host(host, dead);
+
+ if (host->ioaddr)
+ iounmap(host->ioaddr);
+ if (pxa->res)
+ release_mem_region(pxa->res->start,
+ resource_size(pxa->res));
+ clk_disable(pxa->clk);
+ clk_put(pxa->clk);
+
+ sdhci_free_host(host);
+ platform_set_drvdata(pdev, NULL);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int sdhci_pxa_suspend(struct platform_device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sdhci_host *host = platform_get_drvdata(dev);
+ int ret = 0;
+
+ ret = sdhci_suspend_host(host, state);
+
+ return ret;
+}
+
+static int sdhci_pxa_resume(struct platform_device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sdhci_host *host = platform_get_drvdata(dev);
+ int ret = 0;
+
+ ret = sdhci_resume_host(host);
+
+ return ret;
+}
+#else
+#define sdhci_pxa_suspend NULL
+#define sdhci_pxa_resume NULL
+#endif
+
+static const struct dev_pm_ops sdhci_pxa_pm_ops = {
+ .suspend = sdhci_pxa_suspend,
+ .resume = sdhci_pxa_resume,
+};
+
+
+static struct platform_driver sdhci_pxa_driver = {
+ .probe = sdhci_pxa_probe,
+ .remove = __devexit_p(sdhci_pxa_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .pm = &sdhci_pxa_pm_ops,
+ },
+};
+
+/*****************************************************************************\
+ * *
+ * Driver init/exit *
+ * *
+\*****************************************************************************/
+
+static int __init sdhci_pxa_init(void)
+{
+ return platform_driver_register(&sdhci_pxa_driver);
+}
+
+static void __exit sdhci_pxa_exit(void)
+{
+ platform_driver_unregister(&sdhci_pxa_driver);
+}
+
+module_init(sdhci_pxa_init);
+module_exit(sdhci_pxa_exit);
+
+MODULE_DESCRIPTION("SDH controller driver for PXA168/PXA910/MMP2");
+MODULE_AUTHOR("Zhangfei Gao <zhangfei.gao@marvell.com>");
+MODULE_LICENSE("GPL v2");
--
1.7.0.4