From 895c3d15a200d5f5803f992dab46ff114ad26f90 Mon Sep 17 00:00:00 2001
From: Zhangfei Gao <zhangfei.gao@marvell.com>
Date: Tue, 21 Dec 2010 19:51:38 -0500
Subject: [PATCH] mmc: sdhci support emmc ddr50 mode
1. spec sdhc 3.0 does not claim support 1.2v ddr mode
2. Call back function set_power is added, since some controller count on external pmic to provide power
3. According to spec sdhc 3.0, uhs mode, including emmc ddr50 takes effect only when 1.8v Signaling Enable bit, which used for providing 1.8v.
So emmc ddr50 mode works after 1.8v switching process, though emmc ddr50 could work at high voltage such as 3.3v if external pmic provide voltage.
Limitation: emmc ddr50 mode only workable when both host and emmc card support 1.70-1.90v
4. According to JESD84, power down and power up is required to provide low voltage 1.70-1.90v to mmc.
Verified: toshiba emmc on mmp2, with io voltage at 1.8v provided by external pmic.
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
---
drivers/mmc/core/core.c | 13 +++++++++++++
drivers/mmc/core/core.h | 1 +
drivers/mmc/core/mmc.c | 6 +++++-
drivers/mmc/host/sdhci.c | 44 +++++++++++++++++++++++++++++++++++++++++---
drivers/mmc/host/sdhci.h | 14 +++++++++++++-
5 files changed, 73 insertions(+), 5 deletions(-)
@@ -1012,6 +1012,19 @@ static void mmc_power_off(struct mmc_host *host)
}
/*
+ * mmc select low voltage 1.70-1.95v
+ */
+void mmc_select_low_voltage(struct mmc_host *host, u32 ocr)
+{
+ if (!(ocr & MMC_VDD_165_195))
+ return;
+
+ mmc_power_off(host);
+ host->ocr = ocr & host->ocr_avail;
+ mmc_power_up(host);
+}
+
+/*
* Cleanup when the last reference to the bus operator is dropped.
*/
static void __mmc_release_bus(struct mmc_host *host)
@@ -41,6 +41,7 @@ void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width,
unsigned int ddr);
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
+void mmc_select_low_voltage(struct mmc_host *host, u32 ocr);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
static inline void mmc_delay(unsigned int ms)
@@ -790,7 +790,11 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
ocr &= ~0x7F;
}
- host->ocr = mmc_select_voltage(host, ocr);
+ if ((ocr & MMC_VDD_165_195)
+ && (host->ocr_avail & MMC_VDD_165_195))
+ mmc_select_low_voltage(host, ocr);
+ else
+ host->ocr = mmc_select_voltage(host, ocr);
/*
* Can we support the voltage of the card?
@@ -986,6 +986,22 @@ static void sdhci_finish_command(struct sdhci_host *host)
host->cmd = NULL;
}
+static void sdhci_set_ddr(struct sdhci_host *host, unsigned int ddr)
+{
+ u16 con;
+
+ if (ddr == MMC_SDR_MODE)
+ return;
+
+ con = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (con & SDHCI_CTRL2_1_8V) {
+ con &= ~SDHCI_CTRL2_UHS_MASK;
+ if (ddr & MMC_1_8V_DDR_MODE)
+ con |= SDHCI_CTRL2_DDR50;
+ sdhci_writew(host, con, SDHCI_HOST_CONTROL2);
+ }
+}
+
static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
int div;
@@ -1084,6 +1100,18 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
return;
}
+ if ((pwr == SDHCI_POWER_180) &&
+ (host->mmc->caps & MMC_CAP_1_8V_DDR)) {
+ u16 con;
+
+ con = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ con |= SDHCI_CTRL2_1_8V;
+ sdhci_writew(host, con, SDHCI_HOST_CONTROL2);
+
+ if (host->ops->set_power)
+ host->ops->set_power(host, pwr);
+ }
+
/*
* Spec says that we should clear the power reg before setting
* a new value. Some controllers don't seem to like this though.
@@ -1180,6 +1208,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
sdhci_set_clock(host, ios->clock);
+ sdhci_set_ddr(host, ios->ddr);
if (ios->power_mode == MMC_POWER_OFF)
sdhci_set_power(host, -1);
@@ -1744,7 +1773,7 @@ EXPORT_SYMBOL_GPL(sdhci_alloc_host);
int sdhci_add_host(struct sdhci_host *host)
{
struct mmc_host *mmc;
- unsigned int caps, ocr_avail;
+ unsigned int caps, caps_h = 0, ocr_avail;
int ret;
WARN_ON(host == NULL);
@@ -1767,8 +1796,17 @@ int sdhci_add_host(struct sdhci_host *host)
host->version);
}
- caps = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
- sdhci_readl(host, SDHCI_CAPABILITIES);
+ if (host->quirks & SDHCI_QUIRK_MISSING_CAPS)
+ caps = host->caps;
+ else {
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ caps_h = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+ }
+
+ if (caps & SDHCI_CAN_VDD_180) {
+ if (caps_h & SDHCI_CAN_SDR50)
+ mmc->caps |= (MMC_CAP_1_8V_DDR);
+ }
if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
host->flags |= SDHCI_USE_SDMA;
@@ -145,7 +145,14 @@
#define SDHCI_ACMD12_ERR 0x3C
-/* 3E-3F reserved */
+#define SDHCI_HOST_CONTROL2 0x3E
+#define SDHCI_CTRL2_UHS_MASK 0x0007
+#define SDHCI_CTRL2_SDR12 0x0000
+#define SDHCI_CTRL2_SDR25 0x0001
+#define SDHCI_CTRL2_SDR50 0x0002
+#define SDHCI_CTRL2_SDR104 0x0003
+#define SDHCI_CTRL2_DDR50 0x0004
+#define SDHCI_CTRL2_1_8V 0x0008
#define SDHCI_CAPABILITIES 0x40
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
@@ -167,6 +174,9 @@
#define SDHCI_CAN_64BIT 0x10000000
#define SDHCI_CAPABILITIES_1 0x44
+#define SDHCI_CAN_SDR50 0x00000001
+#define SDHCI_CAN_SDR104 0x00000002
+#define SDHCI_CAN_DDR50 0x00000004
#define SDHCI_MAX_CURRENT 0x48
@@ -222,6 +232,8 @@ struct sdhci_ops {
void (*platform_send_init_74_clocks)(struct sdhci_host *host,
u8 power_mode);
unsigned int (*get_ro)(struct sdhci_host *host);
+ unsigned int (*set_power)(struct sdhci_host *host,
+ unsigned short power);
};
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
--
1.7.0.4