diff mbox series

[v4,07/12] cxl/ACPI: Register CXL host ports by bridge device

Message ID 166931491613.2104015.1393432737056891820.stgit@dwillia2-xfh.jf.intel.com (mailing list archive)
State Superseded
Headers show
Series cxl: Add support for Restricted CXL hosts (RCD mode) | expand

Commit Message

Dan Williams Nov. 24, 2022, 6:35 p.m. UTC 
From: Robert Richter <rrichter@amd.com>

A port of a CXL host bridge links to the bridge's ACPI device
(&adev->dev) with its corresponding uport/dport device (uport_dev and
dport_dev respectively). The device is not a direct parent device in
the PCI topology as pdev->dev.parent points to a PCI bridge's (struct
pci_host_bridge) device. The following CXL memory device hierarchy
would be valid for an endpoint once an RCD EP would be enabled (note
this will be done in a later patch):

VH mode:

 cxlmd->dev.parent->parent
        ^^^\^^^^^^\ ^^^^^^\
            \      \       pci_dev (Type 1, Downstream Port)
             \      pci_dev (Type 0, PCI Express Endpoint)
              cxl mem device

RCD mode:

 cxlmd->dev.parent->parent
        ^^^\^^^^^^\ ^^^^^^\
            \      \       pci_host_bridge
             \      pci_dev (Type 0, RCiEP)
              cxl mem device

In VH mode a downstream port is created by port enumeration and thus
always exists.

Now, in RCD mode the host bridge also already exists but it references
to an ACPI device. A port lookup by the PCI device's parent device
will fail as a direct link to the registered port is missing. The ACPI
device of the bridge must be determined first.

To prevent this, change port registration of a CXL host to use the
bridge device instead. Do this also for the VH case as port topology
will better reflect the PCI topology then.

Signed-off-by: Robert Richter <rrichter@amd.com>
[djbw: rebase on brige mocking]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/cxl/acpi.c |   35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

Comments

Robert Richter Nov. 28, 2022, 11:45 a.m. UTC | #1 
On 24.11.22 10:35:16, Dan Williams wrote:
> From: Robert Richter <rrichter@amd.com>
> 
> A port of a CXL host bridge links to the bridge's ACPI device
> (&adev->dev) with its corresponding uport/dport device (uport_dev and
> dport_dev respectively). The device is not a direct parent device in
> the PCI topology as pdev->dev.parent points to a PCI bridge's (struct
> pci_host_bridge) device. The following CXL memory device hierarchy
> would be valid for an endpoint once an RCD EP would be enabled (note
> this will be done in a later patch):
> 
> VH mode:
> 
>  cxlmd->dev.parent->parent
>         ^^^\^^^^^^\ ^^^^^^\
>             \      \       pci_dev (Type 1, Downstream Port)
>              \      pci_dev (Type 0, PCI Express Endpoint)
>               cxl mem device
> 
> RCD mode:
> 
>  cxlmd->dev.parent->parent
>         ^^^\^^^^^^\ ^^^^^^\
>             \      \       pci_host_bridge
>              \      pci_dev (Type 0, RCiEP)
>               cxl mem device
> 
> In VH mode a downstream port is created by port enumeration and thus
> always exists.
> 
> Now, in RCD mode the host bridge also already exists but it references
> to an ACPI device. A port lookup by the PCI device's parent device
> will fail as a direct link to the registered port is missing. The ACPI
> device of the bridge must be determined first.
> 
> To prevent this, change port registration of a CXL host to use the
> bridge device instead. Do this also for the VH case as port topology
> will better reflect the PCI topology then.
> 
> Signed-off-by: Robert Richter <rrichter@amd.com>
> [djbw: rebase on brige mocking]
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Patch looks unchanged compared to v3.

Reviewed-by: Robert Richter <rrichter@amd.com>

> ---
>  drivers/cxl/acpi.c |   35 +++++++++++++++++++----------------
>  1 file changed, 19 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index b8407b77aff6..50d82376097c 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -193,35 +193,34 @@  static int add_host_bridge_uport(struct device *match, void *arg)
 {
 	struct cxl_port *root_port = arg;
 	struct device *host = root_port->dev.parent;
-	struct acpi_device *bridge = to_cxl_host_bridge(host, match);
+	struct acpi_device *hb = to_cxl_host_bridge(host, match);
 	struct acpi_pci_root *pci_root;
 	struct cxl_dport *dport;
 	struct cxl_port *port;
+	struct device *bridge;
 	int rc;
 
-	if (!bridge)
+	if (!hb)
 		return 0;
 
-	dport = cxl_find_dport_by_dev(root_port, match);
+	pci_root = acpi_pci_find_root(hb->handle);
+	bridge = pci_root->bus->bridge;
+	dport = cxl_find_dport_by_dev(root_port, bridge);
 	if (!dport) {
 		dev_dbg(host, "host bridge expected and not found\n");
 		return 0;
 	}
 
-	/*
-	 * Note that this lookup already succeeded in
-	 * to_cxl_host_bridge(), so no need to check for failure here
-	 */
-	pci_root = acpi_pci_find_root(bridge->handle);
-	rc = devm_cxl_register_pci_bus(host, match, pci_root->bus);
+	rc = devm_cxl_register_pci_bus(host, bridge, pci_root->bus);
 	if (rc)
 		return rc;
 
-	port = devm_cxl_add_port(host, match, dport->component_reg_phys, dport);
+	port = devm_cxl_add_port(host, bridge, dport->component_reg_phys,
+				 dport);
 	if (IS_ERR(port))
 		return PTR_ERR(port);
 
-	dev_info(pci_root->bus->bridge, "host supports CXL\n");
+	dev_info(bridge, "host supports CXL\n");
 
 	return 0;
 }
@@ -253,18 +252,20 @@  static int cxl_get_chbcr(union acpi_subtable_headers *header, void *arg,
 static int add_host_bridge_dport(struct device *match, void *arg)
 {
 	acpi_status status;
+	struct device *bridge;
 	unsigned long long uid;
 	struct cxl_dport *dport;
 	struct cxl_chbs_context ctx;
+	struct acpi_pci_root *pci_root;
 	struct cxl_port *root_port = arg;
 	struct device *host = root_port->dev.parent;
-	struct acpi_device *bridge = to_cxl_host_bridge(host, match);
+	struct acpi_device *hb = to_cxl_host_bridge(host, match);
 
-	if (!bridge)
+	if (!hb)
 		return 0;
 
-	status = acpi_evaluate_integer(bridge->handle, METHOD_NAME__UID, NULL,
-				       &uid);
+	status =
+		acpi_evaluate_integer(hb->handle, METHOD_NAME__UID, NULL, &uid);
 	if (status != AE_OK) {
 		dev_err(match, "unable to retrieve _UID\n");
 		return -ENODEV;
@@ -285,7 +286,9 @@  static int add_host_bridge_dport(struct device *match, void *arg)
 
 	dev_dbg(match, "CHBCR found: 0x%08llx\n", (u64)ctx.chbcr);
 
-	dport = devm_cxl_add_dport(root_port, match, uid, ctx.chbcr);
+	pci_root = acpi_pci_find_root(hb->handle);
+	bridge = pci_root->bus->bridge;
+	dport = devm_cxl_add_dport(root_port, bridge, uid, ctx.chbcr);
 	if (IS_ERR(dport))
 		return PTR_ERR(dport);