diff --git a/README.md b/README.md
index e0bc5b7..b4cf673 100644
--- a/README.md
+++ b/README.md
@@ -5,11 +5,14 @@ sub-system in the Linux kernel
 
 Build
 =====
-`./autogen.sh`  
-`./configure CFLAGS='-g -O2' --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib64`  
-`make`  
-`make check`  
-`sudo make install`  
+
+```
+./autogen.sh
+./configure CFLAGS='-g -O2' --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib64
+make
+make check
+sudo make install
+```
 
 There are a number of packages required for the build steps that may not
 be installed by default.   For information about the required packages,
@@ -23,45 +26,56 @@ See the latest documentation for the NVDIMM kernel sub-system here:
   
 https://git.kernel.org/cgit/linux/kernel/git/nvdimm/nvdimm.git/tree/Documentation/nvdimm/nvdimm.txt?h=libnvdimm-for-next
 
+A getting started guide is also available on the kernel.org nvdimm wiki:
+
+https://nvdimm.wiki.kernel.org/start
+
 Unit Tests
 ==========
 The unit tests run by `make check` require the nfit_test.ko module to be
 loaded.  To build and install nfit_test.ko:
 
 1. Obtain the kernel source.  For example,  
-`git clone -b libnvdimm-for-next
-git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git`  
+   `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git`  
 
-2. Skip to step 3 if the kernel version is >= v4.8.  Otherwise, for
+1. Skip to step 3 if the kernel version is >= v4.8.  Otherwise, for
    kernel versions < v4.8, configure the kernel to make some memory
    available to CMA (contiguous memory allocator). This will be used to
    emulate DAX.  
-`CONFIG_DMA_CMA=y`  
-`CONFIG_CMA_SIZE_MBYTES=200`  
-**or**  
-`cma=200M` on the kernel command line.  
+   ```
+   CONFIG_DMA_CMA=y
+   CONFIG_CMA_SIZE_MBYTES=200
+   ```
+   **or**  
+   `cma=200M` on the kernel command line.  
 
-3. Compile the libnvdimm sub-system as a module, make sure "zone device"
+1. Compile the libnvdimm sub-system as a module, make sure "zone device"
    memory is enabled, and enable the btt, pfn, and dax features of the
    sub-system:  
-`CONFIG_X86_PMEM_LEGACY=m`  
-`CONFIG_ZONE_DEVICE=y`  
-`CONFIG_LIBNVDIMM=m`  
-`CONFIG_BLK_DEV_PMEM=m`  
-`CONFIG_ND_BLK=m`  
-`CONFIG_BTT=y`  
-`CONFIG_NVDIMM_PFN=y`  
-`CONFIG_NVDIMM_DAX=y`  
-`CONFIG_DEV_DAX_PMEM=m`
-
-4. Build and install the unit test enabled libnvdimm modules in the
+
+   ```
+   CONFIG_X86_PMEM_LEGACY=m
+   CONFIG_ZONE_DEVICE=y
+   CONFIG_LIBNVDIMM=m
+   CONFIG_BLK_DEV_PMEM=m
+   CONFIG_ND_BLK=m
+   CONFIG_BTT=y
+   CONFIG_NVDIMM_PFN=y
+   CONFIG_NVDIMM_DAX=y
+   CONFIG_DEV_DAX_PMEM=m
+   ```
+
+1. Build and install the unit test enabled libnvdimm modules in the
    following order.  The unit test modules need to be in place prior to
    the `depmod` that runs during the final `modules_install`  
-`make M=tools/testing/nvdimm`  
-`sudo make M=tools/testing/nvdimm modules_install`  
-`sudo make modules_install`
 
-5. Now run `make check` in the ndctl source directory, or `ndctl test`,
+   ```
+   make M=tools/testing/nvdimm
+   sudo make M=tools/testing/nvdimm modules_install
+   sudo make modules_install
+   ```
+
+1. Now run `make check` in the ndctl source directory, or `ndctl test`,
    if ndctl was built with `--enable-test`.
 
 Troubleshooting
@@ -73,23 +87,29 @@ test modules are not available, or the test versions of the modules are
 superseded by the "in-tree/production" version of the modules `make
 check` will skip tests and report a message like the following in
 test/test-suite.log:  
-`SKIP: libndctl`  
-`==============`  
-`test/init: nfit_test_init: nfit.ko: appears to be production version: /lib/modules/4.8.8-200.fc24.x86_64/kernel/drivers/acpi/nfit/nfit.ko.xz`  
-`__ndctl_test_skip: explicit skip test_libndctl:2684`  
-`nfit_test unavailable skipping tests`  
+
+```
+SKIP: libndctl
+==============
+test/init: nfit_test_init: nfit.ko: appears to be production version: /lib/modules/4.8.8-200.fc24.x86_64/kernel/drivers/acpi/nfit/nfit.ko.xz
+__ndctl_test_skip: explicit skip test_libndctl:2684
+nfit_test unavailable skipping tests
+```
 
 If the unit test modules are indeed available in the modules 'extra'
 directory the default depmod policy can be overridden by adding a file
 to /etc/depmod.d with the following contents:  
-`override nfit * extra`  
-`override device_dax * extra`
-`override dax_pmem * extra`  
-`override libnvdimm * extra`  
-`override nd_blk * extra`  
-`override nd_btt * extra`  
-`override nd_e820 * extra`  
-`override nd_pmem * extra`  
+
+```
+override nfit * extra
+override device_dax * extra
+override dax_pmem * extra
+override libnvdimm * extra
+override nd_blk * extra
+override nd_btt * extra
+override nd_e820 * extra
+override nd_pmem * extra
+```
 
 The nfit_test module emulates pmem with memory allocated via vmalloc().
 One of the side effects is that this breaks 'physically contiguous'
