diff mbox series

[ndctl] libndctl/papr: Fix probe for papr-scm compatible nvdimms

Message ID 20210517154824.142237-1-vaibhav@linux.ibm.com (mailing list archive)
State Accepted
Commit e086106b4d81a2079141c848db7695451c04e877
Headers show
Series [ndctl] libndctl/papr: Fix probe for papr-scm compatible nvdimms | expand

Commit Message

Vaibhav Jain May 17, 2021, 3:48 p.m. UTC
With recent changes introduced for unification of PAPR and NFIT
families the probe for papr-scm nvdimms is broken since they don't
expose 'handle' or 'phys_id' sysfs attributes. These attributes are
only exposed by NFIT and 'nvdimm_test' nvdimms. Since 'unable to read'
these sysfs attributes is a non-recoverable error hence this prevents
probing of 'PAPR-SCM' nvdimms and ndctl reports following error:

$ sudo NDCTL_LOG=debug ndctl list -DH
libndctl: ndctl_new: ctx 0x10015342c70 created
libndctl: add_dimm: nmem1: probe failed: Operation not permitted
libndctl: __sysfs_device_parse: nmem1: add_dev() failed
libndctl: add_dimm: nmem0: probe failed: Operation not permitted
libndctl: __sysfs_device_parse: nmem0: add_dev() failed

Fixing this bug is complicated by the fact these attributes are needed
for by the 'nvdimm_test' nvdimms which also uses the
NVDIMM_FAMILY_PAPR. Adding a two way comparison for these two
attributes in populate_dimm_attributes() to distinguish between
'nvdimm_test' and papr-scm nvdimms will be clunky and make future
updates to populate_dimm_attributes() error prone.

So, this patch proposes to fix the issue by re-introducing
add_papr_dimm() to probe both papr-scm and 'nvdimm_test' nvdimms. The
'compatible' sysfs attribute associated with the PAPR device is used
to distinguish between the two nvdimm types and in case an
'nvdimm_test' device is detected then forward its probe to
populate_dimm_attributes().

Fixes: daef3a386a9c("libndctl: Unify adding dimms for papr and nfit
families")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
---
 ndctl/lib/libndctl.c | 57 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 55 insertions(+), 2 deletions(-)

Comments

Verma, Vishal L May 20, 2021, 10:42 p.m. UTC | #1
On Mon, 17 May 2021 21:18:24 +0530, Vaibhav Jain wrote:
> With recent changes introduced for unification of PAPR and NFIT
> families the probe for papr-scm nvdimms is broken since they don't
> expose 'handle' or 'phys_id' sysfs attributes. These attributes are
> only exposed by NFIT and 'nvdimm_test' nvdimms. Since 'unable to read'
> these sysfs attributes is a non-recoverable error hence this prevents
> probing of 'PAPR-SCM' nvdimms and ndctl reports following error:
> 
> [...]

Applied, thanks!

[1/1] libndctl/papr: Fix probe for papr-scm compatible nvdimms
      commit: e086106b4d81a2079141c848db7695451c04e877

Best regards,
diff mbox series

Patch

diff --git a/ndctl/lib/libndctl.c b/ndctl/lib/libndctl.c
index bf0968cce93f..0417720ccd7e 100644
--- a/ndctl/lib/libndctl.c
+++ b/ndctl/lib/libndctl.c
@@ -1757,6 +1757,58 @@  static int populate_dimm_attributes(struct ndctl_dimm *dimm,
 	return rc;
 }
 
+static int add_papr_dimm(struct ndctl_dimm *dimm, const char *dimm_base)
+{
+	int rc = -ENODEV;
+	char buf[SYSFS_ATTR_SIZE];
+	struct ndctl_ctx *ctx = dimm->bus->ctx;
+	char *path = calloc(1, strlen(dimm_base) + 100);
+	const char * const devname = ndctl_dimm_get_devname(dimm);
+
+	dbg(ctx, "%s: Probing of_pmem dimm at %s\n", devname, dimm_base);
+
+	if (!path)
+		return -ENOMEM;
+
+	/* Check the compatibility of the probed nvdimm */
+	sprintf(path, "%s/../of_node/compatible", dimm_base);
+	if (sysfs_read_attr(ctx, path, buf) < 0) {
+		dbg(ctx, "%s: Unable to read compatible field\n", devname);
+		rc =  -ENODEV;
+		goto out;
+	}
+
+	dbg(ctx, "%s:Compatible of_pmem = '%s'\n", devname, buf);
+
+	/* Probe for papr-scm memory */
+	if (strcmp(buf, "ibm,pmemory") == 0) {
+		/* Read the dimm flags file */
+		sprintf(path, "%s/papr/flags", dimm_base);
+		if (sysfs_read_attr(ctx, path, buf) < 0) {
+			rc = -errno;
+			err(ctx, "%s: Unable to read dimm-flags\n", devname);
+			goto out;
+		}
+
+		dbg(ctx, "%s: Adding papr-scm dimm flags:\"%s\"\n", devname, buf);
+		dimm->cmd_family = NVDIMM_FAMILY_PAPR;
+
+		/* Parse dimm flags */
+		parse_papr_flags(dimm, buf);
+
+		/* Allocate monitor mode fd */
+		dimm->health_eventfd = open(path, O_RDONLY|O_CLOEXEC);
+		rc = 0;
+
+	} else if (strcmp(buf, "nvdimm_test") == 0) {
+		/* probe via common populate_dimm_attributes() */
+		rc = populate_dimm_attributes(dimm, dimm_base, "papr");
+	}
+out:
+	free(path);
+	return rc;
+}
+
 static void *add_dimm(void *parent, int id, const char *dimm_base)
 {
 	int formats, i, rc = -ENODEV;
@@ -1848,8 +1900,9 @@  static void *add_dimm(void *parent, int id, const char *dimm_base)
 	/* Check if the given dimm supports nfit */
 	if (ndctl_bus_has_nfit(bus)) {
 		rc = populate_dimm_attributes(dimm, dimm_base, "nfit");
-	} else if (ndctl_bus_has_of_node(bus))
-		rc = populate_dimm_attributes(dimm, dimm_base, "papr");
+	} else if (ndctl_bus_has_of_node(bus)) {
+		rc = add_papr_dimm(dimm, dimm_base);
+	}
 
 	if (rc == -ENODEV) {
 		/* Unprobed dimm with no family */