@@ -162,6 +162,15 @@ include::region-option.txt[]
brought online automatically and immediately with the 'online_movable'
policy. Use this option to disable the automatic onlining behavior.
+-C::
+--check-config::
+ Get reconfiguration parameters from the global daxctl config file.
+ This is typically used when daxctl-reconfigure-device is called from
+ a systemd-udevd device unit file. The reconfiguration proceeds only
+ if the match parameters in a 'reconfigure-device' section of the
+ config match the dax device specified on the command line. See the
+ 'PERSISTENT RECONFIGURATION' section for more details.
+
include::movable-options.txt[]
-f::
@@ -183,6 +192,64 @@ include::human-option.txt[]
include::verbose-option.txt[]
+PERSISTENT RECONFIGURATION
+--------------------------
+
+The 'mode' of a daxctl device is not persistent across reboots by default. This
+is because the device itself does not hold any metadata that hints at what mode
+it was set to, or is intended to be used. The default mode for such a device
+on boot is 'devdax'.
+
+The administrator may set policy such that certain dax devices are always
+reconfigured into a target configuration every boot. This is accomplished via a
+daxctl config file.
+
+The config file may have multiple sections influencing different aspects of
+daxctl operation. The section of interest for persistent reconfiguration is
+'reconfigure-device'. The format of this is as follows:
+
+----
+[reconfigure-device <unique_subsection_name>]
+nvdimm.uuid = <NVDIMM namespace uuid>
+mode = <desired reconfiguration mode> (default: system-ram)
+online = <true|false> (default: true)
+movable = <true|false> (default: true)
+----
+
+Here is an example of a config snippet for managing three devdax namespaces,
+one is left in devdax mode, the second is changed to system-ram mode with
+default options (online, movable), and the third is set to system-ram mode,
+the memory is onlined, but not movable.
+
+Note that the 'subsection name' can be arbitrary, and is only used to
+identify a specific config section. It does not have to match the 'device
+name' (e.g. 'dax0.0' etc).
+
+----
+[reconfigure-device dax0]
+nvdimm.uuid = ed93e918-e165-49d8-921d-383d7b9660c5
+mode = devdax
+
+[reconfigure-device dax1]
+nvdimm.uuid = f36d02ff-1d9f-4fb9-a5b9-8ceb10a00fe3
+mode = system-ram
+
+[reconfigure-device dax2]
+nvdimm.uuid = f36d02ff-1d9f-4fb9-a5b9-8ceb10a00fe3
+mode = system-ram
+online = true
+movable = false
+----
+
+The following example can be used to create a devdax mode namespace, and
+simultaneously add the newly created namespace to the config file for
+system-ram conversion.
+
+----
+ndctl create-namespace --mode=devdax | \
+ jq -r "\"[reconfigure-device $(uuidgen)]\", \"nvdimm.uuid = \(.uuid)\", \"mode = system-ram\"" >> $config_path
+----
+
include::../copyright.txt[]
SEE ALSO
Add a man page update describing how daxctl-reconfigure-device(1) can be used for persistent reconfiguration of a daxctl device using a config file. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> --- .../daxctl/daxctl-reconfigure-device.txt | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+)