diff mbox series

[ndctl,v2,5/5] test/cxl-update-firmware: add a unit test for firmware update

Message ID 20230405-vv-fw_update-v2-5-a778a15e860b@intel.com (mailing list archive)
State Accepted
Commit 813809ed318f3647f92295632128e87ddba3f852
Headers show
Series cxl: firmware update support for libcxl and cxl-cli | expand

Commit Message

Verma, Vishal L June 5, 2023, 8:21 p.m. UTC
Add a unit test to exercise the different operating modes of the
cxl-update-firmware command. Perform an update synchronously,
asynchronously, on multiple devices, and attempt cancellation of an
in-progress update.

Cc: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
---
 test/cxl-update-firmware.sh | 195 ++++++++++++++++++++++++++++++++++++++++++++
 test/meson.build            |   2 +
 2 files changed, 197 insertions(+)
diff mbox series

Patch

diff --git a/test/cxl-update-firmware.sh b/test/cxl-update-firmware.sh
new file mode 100755
index 0000000..c6cd742
--- /dev/null
+++ b/test/cxl-update-firmware.sh
@@ -0,0 +1,195 @@ 
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2023 Intel Corporation. All rights reserved.
+
+. $(dirname $0)/common
+
+rc=77
+
+set -ex
+
+trap 'err $LINENO' ERR
+
+check_prereq "jq"
+check_prereq "dd"
+check_prereq "sha256sum"
+
+modprobe -r cxl_test
+modprobe cxl_test
+rc=1
+
+mk_fw_file()
+{
+	size="$1"
+
+	if [[ ! $size ]]; then
+		err "$LINENO"
+	fi
+	if (( size > 64 )); then
+		err "$LINENO"
+	fi
+
+	fw_file="$(mktemp -p /tmp fw_file_XXXX)"
+	dd if=/dev/urandom of="$fw_file" bs=1M count="$size"
+	echo "$fw_file"
+}
+
+find_memdevs()
+{
+	count="$1"
+
+	if [[ ! $count ]]; then
+		count=1
+	fi
+
+	"$CXL" list -M -b "$CXL_TEST_BUS" \
+		| jq -r '.[] | select(.host | startswith("cxl_mem.")) | .memdev' \
+		| head -"$count"
+}
+
+do_update_fw()
+{
+	"$CXL" update-firmware -b "$CXL_TEST_BUS" "$@"
+}
+
+wait_complete()
+{
+	mem="$1"  # single memdev, not a list
+	max_wait="$2"  # in seconds
+	waited=0
+
+	while true; do
+		json="$("$CXL" list -m "$mem" -F)"
+		in_prog="$(jq -r '.[].firmware.fw_update_in_progress' <<< "$json")"
+		if [[ $in_prog == "true" ]]; then
+			sleep 1
+			waited="$((waited + 1))"
+			continue
+		else
+			break
+		fi
+		if (( waited == max_wait )); then
+			echo "completion timeout for $mem"
+			err "$LINENO"
+		fi
+	done
+}
+
+validate_json_state()
+{
+	json="$1"
+	state="$2"
+
+	while read -r in_prog_state; do
+		if [[ $in_prog_state == $state ]]; then
+			continue
+		else
+			echo "expected fw_update_in_progress:$state"
+			err "$LINENO"
+		fi
+	done < <(jq -r '.[].firmware.fw_update_in_progress' <<< "$json")
+}
+
+validate_fw_update_in_progress()
+{
+	validate_json_state "$1" "true"
+}
+
+validate_fw_update_idle()
+{
+	validate_json_state "$1" "false"
+}
+
+validate_staged_slot()
+{
+	json="$1"
+	slot="$2"
+
+	while read -r staged_slot; do
+		if [[ $staged_slot == $slot ]]; then
+			continue
+		else
+			echo "expected staged_slot:$slot"
+			err "$LINENO"
+		fi
+	done < <(jq -r '.[].firmware.staged_slot' <<< "$json")
+}
+
+check_sha()
+{
+	mem="$1"
+	file="$2"
+	csum_path="/sys/bus/platform/devices/cxl_mem.${mem#mem}/fw_buf_checksum"
+
+	mem_csum="$(cat "$csum_path")"
+	file_csum="$(sha256sum "$file" | awk '{print $1}')"
+
+	if [[ $mem_csum != $file_csum ]]; then
+		echo "checksum failure for mem$mem"
+		err "$LINENO"
+	fi
+}
+
+test_blocking_update()
+{
+	file="$(mk_fw_file 8)"
+	mem="$(find_memdevs 1)"
+	json=$(do_update_fw -F "$file" --wait "$mem")
+	validate_fw_update_idle "$json"
+	# cxl_test's starting slot is '2', so staged should be 3
+	validate_staged_slot "$json" 3
+	check_sha "$mem" "$file"
+	rm "$file"
+}
+
+test_nonblocking_update()
+{
+	file="$(mk_fw_file 16)"
+	mem="$(find_memdevs 1)"
+	json=$(do_update_fw -F "$file" "$mem")
+	validate_fw_update_in_progress "$json"
+	wait_complete "$mem" 15
+	validate_fw_update_idle "$("$CXL" list -m "$mem" -F)"
+	check_sha "$mem" "$file"
+	rm "$file"
+}
+
+test_multiple_memdev()
+{
+	num_mems=2
+
+	file="$(mk_fw_file 16)"
+	declare -a mems
+	mems=( $(find_memdevs "$num_mems") )
+	json="$(do_update_fw -F "$file" "${mems[@]}")"
+	validate_fw_update_in_progress "$json"
+	# use the in-band wait this time
+	json="$(do_update_fw --wait "${mems[@]}")"
+	validate_fw_update_idle "$json"
+	for mem in ${mems[@]}; do
+		check_sha "$mem" "$file"
+	done
+	rm "$file"
+}
+
+test_cancel()
+{
+	file="$(mk_fw_file 16)"
+	mem="$(find_memdevs 1)"
+	json=$(do_update_fw -F "$file" "$mem")
+	validate_fw_update_in_progress "$json"
+	do_update_fw --cancel "$mem"
+	# cancellation is asynchronous, and the result looks the same as idle
+	wait_complete "$mem" 15
+	validate_fw_update_idle "$("$CXL" list -m "$mem" -F)"
+	# no need to check_sha
+	rm "$file"
+}
+
+test_blocking_update
+test_nonblocking_update
+test_multiple_memdev
+test_cancel
+
+check_dmesg "$LINENO"
+modprobe -r cxl_test
diff --git a/test/meson.build b/test/meson.build
index a956885..0f4d3c4 100644
--- a/test/meson.build
+++ b/test/meson.build
@@ -155,6 +155,7 @@  cxl_sysfs = find_program('cxl-region-sysfs.sh')
 cxl_labels = find_program('cxl-labels.sh')
 cxl_create_region = find_program('cxl-create-region.sh')
 cxl_xor_region = find_program('cxl-xor-region.sh')
+cxl_update_firmware = find_program('cxl-update-firmware.sh')
 
 tests = [
   [ 'libndctl',               libndctl,		  'ndctl' ],
@@ -198,6 +199,7 @@  if get_option('destructive').enabled()
 
   tests += [
     [ 'firmware-update.sh',     firmware_update,	  'ndctl' ],
+    [ 'cxl-update-firmware.sh', cxl_update_firmware,      'cxl'   ],
     [ 'pmem-ns',           pmem_ns,	   'ndctl' ],
     [ 'sub-section.sh',    sub_section,	   'dax'   ],
     [ 'dax-dev',           dax_dev,	   'dax'   ],