| Message ID | 20230523035704.826188-2-lizhijian@fujitsu.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [ndctl,1/2] CONTRIBUTING.md: document cxl mailing list | expand |
On 5/22/23 20:57, Li Zhijian wrote: > It requires some CLX specific kconfigs and testing purpose module > > Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> > --- > README.md | 17 +++++++++++++++-- > 1 file changed, 15 insertions(+), 2 deletions(-) > > diff --git a/README.md b/README.md > index 7c7cf0dd065d..521e2582fb05 100644 > --- a/README.md > +++ b/README.md > @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start > > Unit Tests > ========== > -The unit tests run by `meson test` require the nfit_test.ko module to be > -loaded. To build and install nfit_test.ko: > +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be > +loaded. To build and install nfit_test.ko and cxl_test.ko: > > 1. Obtain the kernel source. For example, > `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git` > @@ -70,6 +70,13 @@ loaded. To build and install nfit_test.ko: > CONFIG_NVDIMM_DAX=y > CONFIG_DEV_DAX_PMEM=m > CONFIG_ENCRYPTED_KEYS=y > + CONFIG_CXL_BUS=m > + CONFIG_CXL_PCI=m > + CONFIG_CXL_ACPI=m > + CONFIG_CXL_PMEM=m > + CONFIG_CXL_MEM=m > + CONFIG_CXL_PORT=m > + CONFIG_DEV_DAX_CXL=m Probably should have a separate entry for CXL configs for testing. There's a cxl.git at kernel.org as well. Also will need: CONFIG_NVDIMM_SECURITY_TEST=y CONFIG_CXL_REGION_INVALIDATION_TEST=y > ``` > > 1. Build and install the unit test enabled libnvdimm modules in the > @@ -77,8 +84,14 @@ loaded. To build and install nfit_test.ko: > the `depmod` that runs during the final `modules_install` > > ``` > + # For nfit_test.ko > make M=tools/testing/nvdimm > sudo make M=tools/testing/nvdimm modules_install > + > + # For cxl_test.ko > + make M=tools/testing/cxl > + sudo make M=tools/testing/cxl modules_install > + > sudo make modules_install > ``` >
On 25/05/2023 23:28, Dave Jiang wrote: > > On 5/22/23 20:57, Li Zhijian wrote: >> It requires some CLX specific kconfigs and testing purpose module >> >> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> >> --- >> README.md | 17 +++++++++++++++-- >> 1 file changed, 15 insertions(+), 2 deletions(-) >> >> diff --git a/README.md b/README.md >> index 7c7cf0dd065d..521e2582fb05 100644 >> --- a/README.md >> +++ b/README.md >> @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start >> Unit Tests >> ========== >> -The unit tests run by `meson test` require the nfit_test.ko module to be >> -loaded. To build and install nfit_test.ko: >> +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be >> +loaded. To build and install nfit_test.ko and cxl_test.ko: >> 1. Obtain the kernel source. For example, >> `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git` >> @@ -70,6 +70,13 @@ loaded. To build and install nfit_test.ko: >> CONFIG_NVDIMM_DAX=y >> CONFIG_DEV_DAX_PMEM=m >> CONFIG_ENCRYPTED_KEYS=y >> + CONFIG_CXL_BUS=m >> + CONFIG_CXL_PCI=m >> + CONFIG_CXL_ACPI=m >> + CONFIG_CXL_PMEM=m >> + CONFIG_CXL_MEM=m >> + CONFIG_CXL_PORT=m >> + CONFIG_DEV_DAX_CXL=m > > Probably should have a separate entry for CXL configs for testing. There's a cxl.git at kernel.org as well. > > Also will need: > > CONFIG_NVDIMM_SECURITY_TEST=y > I also noticed that Yi have sent a patch to add this and some other kconfigs https://lore.kernel.org/nvdimm/20230516121730.2561605-1-yi.zhang@redhat.com/T/#u > CONFIG_CXL_REGION_INVALIDATION_TEST=y Yes, i indeed missed it. I insert a section before *run the test* as below. A markdown preview of README.md Please take another look. diff --git a/README.md b/README.md index 7c7cf0dd065d..324d179ac4ea 100644 --- a/README.md +++ b/README.md @@ -82,6 +82,32 @@ loaded. To build and install nfit_test.ko: sudo make modules_install ``` +1. CXL test + + The unit tests will also run CXL test by default. In order to make the + CXL test work properly, we need to install the cxl_test.ko as well. + + Obtain the CXL kernel source(optional). For example, + `git clone -b pending git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git` + + Enable CXL specific kernel configurations + ``` + CONFIG_CXL_BUS=m + CONFIG_CXL_PCI=m + CONFIG_CXL_ACPI=m + CONFIG_CXL_PMEM=m + CONFIG_CXL_MEM=m + CONFIG_CXL_PORT=m + CONFIG_CXL_REGION=y + CONFIG_CXL_REGION_INVALIDATION_TEST=y + CONFIG_DEV_DAX_CXL=m + ``` + Install cxl_test.ko + ```For cxl_test.ko + make M=tools/testing/cxl + sudo make M=tools/testing/cxl modules_install + sudo make modules_install + ``` 1. Now run `meson test -C build` in the ndctl source directory, or `ndctl test`, if ndctl was built with `-Dtest=enabled` as a configuration option to meson. > > > >> ``` >> 1. Build and install the unit test enabled libnvdimm modules in the >> @@ -77,8 +84,14 @@ loaded. To build and install nfit_test.ko: >> the `depmod` that runs during the final `modules_install` >> ``` >> + # For nfit_test.ko >> make M=tools/testing/nvdimm >> sudo make M=tools/testing/nvdimm modules_install >> + >> + # For cxl_test.ko >> + make M=tools/testing/cxl >> + sudo make M=tools/testing/cxl modules_install >> + >> sudo make modules_install >> ```
On 26/05/2023 12:01, Zhijian Li (Fujitsu) wrote: > > > On 25/05/2023 23:28, Dave Jiang wrote: >> >> On 5/22/23 20:57, Li Zhijian wrote: >>> It requires some CLX specific kconfigs and testing purpose module >>> >>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> >>> --- >>> README.md | 17 +++++++++++++++-- >>> 1 file changed, 15 insertions(+), 2 deletions(-) >>> >>> diff --git a/README.md b/README.md >>> index 7c7cf0dd065d..521e2582fb05 100644 >>> --- a/README.md >>> +++ b/README.md >>> @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start >>> Unit Tests >>> ========== >>> -The unit tests run by `meson test` require the nfit_test.ko module to be >>> -loaded. To build and install nfit_test.ko: >>> +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be >>> +loaded. To build and install nfit_test.ko and cxl_test.ko: >>> 1. Obtain the kernel source. For example, >>> `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git` >>> @@ -70,6 +70,13 @@ loaded. To build and install nfit_test.ko: >>> CONFIG_NVDIMM_DAX=y >>> CONFIG_DEV_DAX_PMEM=m >>> CONFIG_ENCRYPTED_KEYS=y >>> + CONFIG_CXL_BUS=m >>> + CONFIG_CXL_PCI=m >>> + CONFIG_CXL_ACPI=m >>> + CONFIG_CXL_PMEM=m >>> + CONFIG_CXL_MEM=m >>> + CONFIG_CXL_PORT=m >>> + CONFIG_DEV_DAX_CXL=m >> >> Probably should have a separate entry for CXL configs for testing. There's a cxl.git at kernel.org as well. >> >> Also will need: >> >> CONFIG_NVDIMM_SECURITY_TEST=y >> > > I also noticed that Yi have sent a patch to add this and some other kconfigs > https://lore.kernel.org/nvdimm/20230516121730.2561605-1-yi.zhang@redhat.com/T/#u > >> CONFIG_CXL_REGION_INVALIDATION_TEST=y > > Yes, i indeed missed it. > > I insert a section before *run the test* as below. A markdown preview of README.md Attach the README preview link: https://github.com/zhijianli88/ndctl/blob/cxl/README.md > Please take another look. > > diff --git a/README.md b/README.md > index 7c7cf0dd065d..324d179ac4ea 100644 > --- a/README.md > +++ b/README.md > @@ -82,6 +82,32 @@ loaded. To build and install nfit_test.ko: > sudo make modules_install > ``` > > +1. CXL test > + > + The unit tests will also run CXL test by default. In order to make the > + CXL test work properly, we need to install the cxl_test.ko as well. > + > + Obtain the CXL kernel source(optional). For example, > + `git clone -b pending git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git` > + > + Enable CXL specific kernel configurations > + ``` > + CONFIG_CXL_BUS=m > + CONFIG_CXL_PCI=m > + CONFIG_CXL_ACPI=m > + CONFIG_CXL_PMEM=m > + CONFIG_CXL_MEM=m > + CONFIG_CXL_PORT=m > + CONFIG_CXL_REGION=y > + CONFIG_CXL_REGION_INVALIDATION_TEST=y > + CONFIG_DEV_DAX_CXL=m > + ``` > + Install cxl_test.ko > + ```For cxl_test.ko > + make M=tools/testing/cxl > + sudo make M=tools/testing/cxl modules_install > + sudo make modules_install > + ``` > 1. Now run `meson test -C build` in the ndctl source directory, or `ndctl test`, > if ndctl was built with `-Dtest=enabled` as a configuration option to meson. > > >> >> >> >>> ``` >>> 1. Build and install the unit test enabled libnvdimm modules in the >>> @@ -77,8 +84,14 @@ loaded. To build and install nfit_test.ko: >>> the `depmod` that runs during the final `modules_install` >>> ``` >>> + # For nfit_test.ko >>> make M=tools/testing/nvdimm >>> sudo make M=tools/testing/nvdimm modules_install >>> + >>> + # For cxl_test.ko >>> + make M=tools/testing/cxl >>> + sudo make M=tools/testing/cxl modules_install >>> + >>> sudo make modules_install >>> ```
On 5/25/23 21:01, Zhijian Li (Fujitsu) wrote: > > On 25/05/2023 23:28, Dave Jiang wrote: >> On 5/22/23 20:57, Li Zhijian wrote: >>> It requires some CLX specific kconfigs and testing purpose module >>> >>> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> >>> --- >>> README.md | 17 +++++++++++++++-- >>> 1 file changed, 15 insertions(+), 2 deletions(-) >>> >>> diff --git a/README.md b/README.md >>> index 7c7cf0dd065d..521e2582fb05 100644 >>> --- a/README.md >>> +++ b/README.md >>> @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start >>> Unit Tests >>> ========== >>> -The unit tests run by `meson test` require the nfit_test.ko module to be >>> -loaded. To build and install nfit_test.ko: >>> +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be >>> +loaded. To build and install nfit_test.ko and cxl_test.ko: >>> 1. Obtain the kernel source. For example, >>> `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git` >>> @@ -70,6 +70,13 @@ loaded. To build and install nfit_test.ko: >>> CONFIG_NVDIMM_DAX=y >>> CONFIG_DEV_DAX_PMEM=m >>> CONFIG_ENCRYPTED_KEYS=y >>> + CONFIG_CXL_BUS=m >>> + CONFIG_CXL_PCI=m >>> + CONFIG_CXL_ACPI=m >>> + CONFIG_CXL_PMEM=m >>> + CONFIG_CXL_MEM=m >>> + CONFIG_CXL_PORT=m >>> + CONFIG_DEV_DAX_CXL=m >> Probably should have a separate entry for CXL configs for testing. There's a cxl.git at kernel.org as well. >> >> Also will need: >> >> CONFIG_NVDIMM_SECURITY_TEST=y >> > I also noticed that Yi have sent a patch to add this and some other kconfigs > https://lore.kernel.org/nvdimm/20230516121730.2561605-1-yi.zhang@redhat.com/T/#u > >> CONFIG_CXL_REGION_INVALIDATION_TEST=y > Yes, i indeed missed it. > > I insert a section before *run the test* as below. A markdown preview of README.md > Please take another look. > > diff --git a/README.md b/README.md > index 7c7cf0dd065d..324d179ac4ea 100644 > --- a/README.md > +++ b/README.md > @@ -82,6 +82,32 @@ loaded. To build and install nfit_test.ko: > sudo make modules_install > ``` > > +1. CXL test > + > + The unit tests will also run CXL test by default. In order to make the > + CXL test work properly, we need to install the cxl_test.ko as well. > + > + Obtain the CXL kernel source(optional). For example, > + `git clone -b pending git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl.git` > + > + Enable CXL specific kernel configurations > + ``` > + CONFIG_CXL_BUS=m > + CONFIG_CXL_PCI=m > + CONFIG_CXL_ACPI=m > + CONFIG_CXL_PMEM=m > + CONFIG_CXL_MEM=m > + CONFIG_CXL_PORT=m > + CONFIG_CXL_REGION=y > + CONFIG_CXL_REGION_INVALIDATION_TEST=y > + CONFIG_DEV_DAX_CXL=m > + ``` > + Install cxl_test.ko > + ```For cxl_test.ko > + make M=tools/testing/cxl > + sudo make M=tools/testing/cxl modules_install > + sudo make modules_install > + ``` > 1. Now run `meson test -C build` in the ndctl source directory, or `ndctl test`, > if ndctl was built with `-Dtest=enabled` as a configuration option to meson. LGTM > > >> >> >>> ``` >>> 1. Build and install the unit test enabled libnvdimm modules in the >>> @@ -77,8 +84,14 @@ loaded. To build and install nfit_test.ko: >>> the `depmod` that runs during the final `modules_install` >>> ``` >>> + # For nfit_test.ko >>> make M=tools/testing/nvdimm >>> sudo make M=tools/testing/nvdimm modules_install >>> + >>> + # For cxl_test.ko >>> + make M=tools/testing/cxl >>> + sudo make M=tools/testing/cxl modules_install >>> + >>> sudo make modules_install >>> ```
diff --git a/README.md b/README.md index 7c7cf0dd065d..521e2582fb05 100644 --- a/README.md +++ b/README.md @@ -39,8 +39,8 @@ https://nvdimm.wiki.kernel.org/start Unit Tests ========== -The unit tests run by `meson test` require the nfit_test.ko module to be -loaded. To build and install nfit_test.ko: +The unit tests run by `meson test` require the nfit_test.ko and cxl_test.ko modules to be +loaded. To build and install nfit_test.ko and cxl_test.ko: 1. Obtain the kernel source. For example, `git clone -b libnvdimm-for-next git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm.git` @@ -70,6 +70,13 @@ loaded. To build and install nfit_test.ko: CONFIG_NVDIMM_DAX=y CONFIG_DEV_DAX_PMEM=m CONFIG_ENCRYPTED_KEYS=y + CONFIG_CXL_BUS=m + CONFIG_CXL_PCI=m + CONFIG_CXL_ACPI=m + CONFIG_CXL_PMEM=m + CONFIG_CXL_MEM=m + CONFIG_CXL_PORT=m + CONFIG_DEV_DAX_CXL=m ``` 1. Build and install the unit test enabled libnvdimm modules in the @@ -77,8 +84,14 @@ loaded. To build and install nfit_test.ko: the `depmod` that runs during the final `modules_install` ``` + # For nfit_test.ko make M=tools/testing/nvdimm sudo make M=tools/testing/nvdimm modules_install + + # For cxl_test.ko + make M=tools/testing/cxl + sudo make M=tools/testing/cxl modules_install + sudo make modules_install ```
It requires some CLX specific kconfigs and testing purpose module Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> --- README.md | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)