| Message ID | 20231214-vv-dax_abi-v5-4-3f7b006960b4@intel.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add DAX ABI for memmap_on_memory | expand |
On Thu, Dec 14, 2023 at 12:37:57AM -0700, Vishal Verma wrote: > +static ssize_t memmap_on_memory_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct dev_dax *dev_dax = to_dev_dax(dev); > + > + return sprintf(buf, "%d\n", dev_dax->memmap_on_memory); checkpatch should have noticed that this should be sysfs_emit(), right? If not, please make the change anyway. > diff --git a/Documentation/ABI/testing/sysfs-bus-dax b/Documentation/ABI/testing/sysfs-bus-dax > index 6359f7bc9bf4..40d9965733b2 100644 > --- a/Documentation/ABI/testing/sysfs-bus-dax > +++ b/Documentation/ABI/testing/sysfs-bus-dax > @@ -134,3 +134,20 @@ KernelVersion: v5.1 > Contact: nvdimm@lists.linux.dev > Description: > (RO) The id attribute indicates the region id of a dax region. > + > +What: /sys/bus/dax/devices/daxX.Y/memmap_on_memory > +Date: October, 2023 It's not October anymore :) thanks, greg k-h
Vishal Verma <vishal.l.verma@intel.com> writes: > Add a sysfs knob for dax devices to control the memmap_on_memory setting > if the dax device were to be hotplugged as system memory. > > The default memmap_on_memory setting for dax devices originating via > pmem or hmem is set to 'false' - i.e. no memmap_on_memory semantics, to > preserve legacy behavior. For dax devices via CXL, the default is on. > The sysfs control allows the administrator to override the above > defaults if needed. > > Cc: David Hildenbrand <david@redhat.com> > Cc: Dan Williams <dan.j.williams@intel.com> > Cc: Dave Jiang <dave.jiang@intel.com> > Cc: Dave Hansen <dave.hansen@linux.intel.com> > Cc: Huang Ying <ying.huang@intel.com> > Tested-by: Li Zhijian <lizhijian@fujitsu.com> > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Reviewed-by: David Hildenbrand <david@redhat.com> > Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> > --- > drivers/dax/bus.c | 38 +++++++++++++++++++++++++++++++++ > Documentation/ABI/testing/sysfs-bus-dax | 17 +++++++++++++++ > 2 files changed, 55 insertions(+) > > diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c > index 6226de131d17..f4d3beec507c 100644 > --- a/drivers/dax/bus.c > +++ b/drivers/dax/bus.c > @@ -1245,6 +1245,43 @@ static ssize_t numa_node_show(struct device *dev, > } > static DEVICE_ATTR_RO(numa_node); > > +static ssize_t memmap_on_memory_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct dev_dax *dev_dax = to_dev_dax(dev); > + > + return sprintf(buf, "%d\n", dev_dax->memmap_on_memory); > +} > + > +static ssize_t memmap_on_memory_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t len) > +{ > + struct dev_dax *dev_dax = to_dev_dax(dev); > + struct dax_device_driver *dax_drv; > + ssize_t rc; > + bool val; > + > + rc = kstrtobool(buf, &val); > + if (rc) > + return rc; > + > + if (val == true && !mhp_supports_memmap_on_memory()) { > + dev_dbg(dev, "memmap_on_memory is not available\n"); > + return -EOPNOTSUPP; > + } > + > + guard(device)(dev); > + dax_drv = to_dax_drv(dev->driver); Although "struct driver" is the first member of "struct dax_device_driver", I feel the code is fragile to depends on that. Can we check dev->driver directly instead? -- Best Regards, Huang, Ying > + if (dax_drv && dev_dax->memmap_on_memory != val && > + dax_drv->type == DAXDRV_KMEM_TYPE) > + return -EBUSY; > + dev_dax->memmap_on_memory = val; > + > + return len; > +} > +static DEVICE_ATTR_RW(memmap_on_memory); > + > static umode_t dev_dax_visible(struct kobject *kobj, struct attribute *a, int n) > { > struct device *dev = container_of(kobj, struct device, kobj); > @@ -1271,6 +1308,7 @@ static struct attribute *dev_dax_attributes[] = { > &dev_attr_align.attr, > &dev_attr_resource.attr, > &dev_attr_numa_node.attr, > + &dev_attr_memmap_on_memory.attr, > NULL, > }; > > diff --git a/Documentation/ABI/testing/sysfs-bus-dax b/Documentation/ABI/testing/sysfs-bus-dax > index 6359f7bc9bf4..40d9965733b2 100644 > --- a/Documentation/ABI/testing/sysfs-bus-dax > +++ b/Documentation/ABI/testing/sysfs-bus-dax > @@ -134,3 +134,20 @@ KernelVersion: v5.1 > Contact: nvdimm@lists.linux.dev > Description: > (RO) The id attribute indicates the region id of a dax region. > + > +What: /sys/bus/dax/devices/daxX.Y/memmap_on_memory > +Date: October, 2023 > +KernelVersion: v6.8 > +Contact: nvdimm@lists.linux.dev > +Description: > + (RW) Control the memmap_on_memory setting if the dax device > + were to be hotplugged as system memory. This determines whether > + the 'altmap' for the hotplugged memory will be placed on the > + device being hotplugged (memmap_on_memory=1) or if it will be > + placed on regular memory (memmap_on_memory=0). This attribute > + must be set before the device is handed over to the 'kmem' > + driver (i.e. hotplugged into system-ram). Additionally, this > + depends on CONFIG_MHP_MEMMAP_ON_MEMORY, and a globally enabled > + memmap_on_memory parameter for memory_hotplug. This is > + typically set on the kernel command line - > + memory_hotplug.memmap_on_memory set to 'true' or 'force'."
diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c index 6226de131d17..f4d3beec507c 100644 --- a/drivers/dax/bus.c +++ b/drivers/dax/bus.c @@ -1245,6 +1245,43 @@ static ssize_t numa_node_show(struct device *dev, } static DEVICE_ATTR_RO(numa_node); +static ssize_t memmap_on_memory_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct dev_dax *dev_dax = to_dev_dax(dev); + + return sprintf(buf, "%d\n", dev_dax->memmap_on_memory); +} + +static ssize_t memmap_on_memory_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct dev_dax *dev_dax = to_dev_dax(dev); + struct dax_device_driver *dax_drv; + ssize_t rc; + bool val; + + rc = kstrtobool(buf, &val); + if (rc) + return rc; + + if (val == true && !mhp_supports_memmap_on_memory()) { + dev_dbg(dev, "memmap_on_memory is not available\n"); + return -EOPNOTSUPP; + } + + guard(device)(dev); + dax_drv = to_dax_drv(dev->driver); + if (dax_drv && dev_dax->memmap_on_memory != val && + dax_drv->type == DAXDRV_KMEM_TYPE) + return -EBUSY; + dev_dax->memmap_on_memory = val; + + return len; +} +static DEVICE_ATTR_RW(memmap_on_memory); + static umode_t dev_dax_visible(struct kobject *kobj, struct attribute *a, int n) { struct device *dev = container_of(kobj, struct device, kobj); @@ -1271,6 +1308,7 @@ static struct attribute *dev_dax_attributes[] = { &dev_attr_align.attr, &dev_attr_resource.attr, &dev_attr_numa_node.attr, + &dev_attr_memmap_on_memory.attr, NULL, }; diff --git a/Documentation/ABI/testing/sysfs-bus-dax b/Documentation/ABI/testing/sysfs-bus-dax index 6359f7bc9bf4..40d9965733b2 100644 --- a/Documentation/ABI/testing/sysfs-bus-dax +++ b/Documentation/ABI/testing/sysfs-bus-dax @@ -134,3 +134,20 @@ KernelVersion: v5.1 Contact: nvdimm@lists.linux.dev Description: (RO) The id attribute indicates the region id of a dax region. + +What: /sys/bus/dax/devices/daxX.Y/memmap_on_memory +Date: October, 2023 +KernelVersion: v6.8 +Contact: nvdimm@lists.linux.dev +Description: + (RW) Control the memmap_on_memory setting if the dax device + were to be hotplugged as system memory. This determines whether + the 'altmap' for the hotplugged memory will be placed on the + device being hotplugged (memmap_on_memory=1) or if it will be + placed on regular memory (memmap_on_memory=0). This attribute + must be set before the device is handed over to the 'kmem' + driver (i.e. hotplugged into system-ram). Additionally, this + depends on CONFIG_MHP_MEMMAP_ON_MEMORY, and a globally enabled + memmap_on_memory parameter for memory_hotplug. This is + typically set on the kernel command line - + memory_hotplug.memmap_on_memory set to 'true' or 'force'."