mbox series

[v5,net-next,00/10] Cleanup in brport flags switchdev offload for DSA

Message ID 20210212151600.3357121-1-olteanv@gmail.com (mailing list archive)
Headers show
Series Cleanup in brport flags switchdev offload for DSA | expand

Message

Vladimir Oltean Feb. 12, 2021, 3:15 p.m. UTC
From: Vladimir Oltean <vladimir.oltean@nxp.com>

The initial goal of this series was to have better support for
standalone ports mode on the DSA drivers like ocelot/felix and sja1105.
This turned out to require some API adjustments in both directions:
to the information presented to and by the switchdev notifier, and to
the API presented to the switch drivers by the DSA layer.

Vladimir Oltean (10):
  net: switchdev: propagate extack to port attributes
  net: bridge: offload all port flags at once in br_setport
  net: bridge: don't print in br_switchdev_set_port_flag
  net: dsa: configure better brport flags when ports leave the bridge
  net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS
    attributes
  net: dsa: act as passthrough for bridge port flags
  net: dsa: felix: restore multicast flood to CPU when NPI tagger
    reinitializes
  net: mscc: ocelot: use separate flooding PGID for broadcast
  net: mscc: ocelot: offload bridge port flags to device
  net: dsa: sja1105: offload bridge port flags to device

 drivers/net/dsa/b53/b53_common.c              |  91 ++++---
 drivers/net/dsa/b53/b53_priv.h                |   2 -
 drivers/net/dsa/mv88e6xxx/chip.c              | 163 ++++++++++---
 drivers/net/dsa/mv88e6xxx/chip.h              |   6 +-
 drivers/net/dsa/mv88e6xxx/port.c              |  52 ++--
 drivers/net/dsa/mv88e6xxx/port.h              |  19 +-
 drivers/net/dsa/ocelot/felix.c                |  25 ++
 drivers/net/dsa/sja1105/sja1105.h             |   2 +
 drivers/net/dsa/sja1105/sja1105_main.c        | 222 +++++++++++++++++-
 drivers/net/dsa/sja1105/sja1105_spi.c         |   6 +
 .../marvell/prestera/prestera_switchdev.c     |  26 +-
 .../mellanox/mlxsw/spectrum_switchdev.c       |  53 +++--
 drivers/net/ethernet/mscc/ocelot.c            | 100 +++++++-
 drivers/net/ethernet/mscc/ocelot_net.c        |  52 +++-
 drivers/net/ethernet/rocker/rocker_main.c     |  10 +-
 drivers/net/ethernet/ti/am65-cpsw-switchdev.c |  27 ++-
 drivers/net/ethernet/ti/cpsw_switchdev.c      |  27 ++-
 drivers/staging/fsl-dpaa2/ethsw/ethsw.c       |  34 ++-
 include/net/dsa.h                             |  10 +-
 include/net/switchdev.h                       |  13 +-
 include/soc/mscc/ocelot.h                     |  20 +-
 net/bridge/br_netlink.c                       | 116 +++------
 net/bridge/br_private.h                       |   6 +-
 net/bridge/br_switchdev.c                     |  23 +-
 net/bridge/br_sysfs_if.c                      |   7 +-
 net/dsa/dsa_priv.h                            |  11 +-
 net/dsa/port.c                                |  76 ++++--
 net/dsa/slave.c                               |  10 +-
 net/switchdev/switchdev.c                     |  11 +-
 29 files changed, 889 insertions(+), 331 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Feb. 13, 2021, 1:20 a.m. UTC | #1
Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Fri, 12 Feb 2021 17:15:50 +0200 you wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> 
> The initial goal of this series was to have better support for
> standalone ports mode on the DSA drivers like ocelot/felix and sja1105.
> This turned out to require some API adjustments in both directions:
> to the information presented to and by the switchdev notifier, and to
> the API presented to the switch drivers by the DSA layer.
> 
> [...]

Here is the summary with links:
  - [v5,net-next,01/10] net: switchdev: propagate extack to port attributes
    https://git.kernel.org/netdev/net-next/c/4c08c586ff29
  - [v5,net-next,02/10] net: bridge: offload all port flags at once in br_setport
    https://git.kernel.org/netdev/net-next/c/304ae3bf1c1a
  - [v5,net-next,03/10] net: bridge: don't print in br_switchdev_set_port_flag
    https://git.kernel.org/netdev/net-next/c/078bbb851ea6
  - [v5,net-next,04/10] net: dsa: configure better brport flags when ports leave the bridge
    https://git.kernel.org/netdev/net-next/c/5e38c15856e9
  - [v5,net-next,05/10] net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes
    https://git.kernel.org/netdev/net-next/c/e18f4c18ab5b
  - [v5,net-next,06/10] net: dsa: act as passthrough for bridge port flags
    https://git.kernel.org/netdev/net-next/c/a8b659e7ff75
  - [v5,net-next,07/10] net: dsa: felix: restore multicast flood to CPU when NPI tagger reinitializes
    https://git.kernel.org/netdev/net-next/c/6edb9e8d451e
  - [v5,net-next,08/10] net: mscc: ocelot: use separate flooding PGID for broadcast
    https://git.kernel.org/netdev/net-next/c/b360d94f1b86
  - [v5,net-next,09/10] net: mscc: ocelot: offload bridge port flags to device
    https://git.kernel.org/netdev/net-next/c/421741ea5672
  - [v5,net-next,10/10] net: dsa: sja1105: offload bridge port flags to device
    https://git.kernel.org/netdev/net-next/c/4d9423549501

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html