mbox series

[0/4] clk: ti: add am33xx spread spectrum clock support

Message ID 20210314151233.23243-1-dariobin@libero.it (mailing list archive)
Headers show
Series clk: ti: add am33xx spread spectrum clock support | expand

Message

Dario Binacchi March 14, 2021, 3:12 p.m. UTC
As reported by the TI spruh73x RM, MPU and LCD modules support spread
spectrum clocking (SSC) on their output clocks. SSC is used to spread
the spectral peaking of the clock to reduce any electromagnetic
interference (EMI) that may be caused due to the clock’s fundamental
or any of its harmonics.
The series allows you to enable and adjust the spread spectrum clocking
for all am33xx PLLs for which it is supported.



Dario Binacchi (4):
  clk: ti: fix typo in routine description
  dt-bindings: ti: dpll: add spread spectrum support
  ARM: dts: am33xx-clocks: add spread spectrum support
  clk: ti: add am33xx spread spectrum clock support

 .../devicetree/bindings/clock/ti/dpll.txt     | 20 +++++
 arch/arm/boot/dts/am33xx-clocks.dtsi          |  4 +-
 drivers/clk/ti/dpll.c                         | 41 +++++++++
 drivers/clk/ti/dpll3xxx.c                     | 87 ++++++++++++++++++-
 include/linux/clk/ti.h                        | 24 +++++
 5 files changed, 173 insertions(+), 3 deletions(-)