mbox series

[v2,0/7] iio: adc: palmas_gpadc: add iio events

Message ID 20230402164247.3089146-1-risca@dalakolonin.se (mailing list archive)
Headers show
Series iio: adc: palmas_gpadc: add iio events | expand

Message

Patrik Dahlström April 2, 2023, 4:42 p.m. UTC
The palmas gpadc block has support for monitoring up to 2 ADC channels
and issue an interrupt if they reach past a set threshold. This can be
configured statically with device tree today, but it only gets enabled
when reaching sleep mode. Also, it doesn't look like anyone is using it.

Instead of this one special case, change the code so userspace can
configure the ADC channels to their own needs through the iio events
subsystem. The high and low threshold values can be set for every
channel, but only 2 thresholds can be enabled at a time. Trying to
enable more than 2 thresholds will result in an error.

The configured thresholds will wake up the system from sleep mode if
wakeup is enabled in /sys/devices/.../power/wakeup.

The old platform data was removed.

Thresholds, events, and wakeup were tested on omap5-uevm board. It wakes
up from sleep mode when wakeup is enabled and a threshold is passed. A
userspace tool for monitoring events and adjusting thresholds can be
found at [3].

Patrik Dahlström (7):
  iio: adc: palmas: remove adc_wakeupX_data
  iio: adc: palmas: replace "wakeup" with "event"
  iio: adc: palmas: use iio_event_direction for threshold polarity
  iio: adc: palmas: move eventX_enable into palmas_adc_event
  iio: adc: palmas: always reset events on unload
  iio: adc: palmas: add support for iio threshold events
  iio: adc: palmas: don't alter event config on suspend/resume

 drivers/iio/adc/palmas_gpadc.c | 550 +++++++++++++++++++++++++++------
 include/linux/mfd/palmas.h     |   8 -
 2 files changed, 455 insertions(+), 103 deletions(-)


base-commit: 37fd83916da2e4cae03d350015c82a67b1b334c4
prerequisite-patch-id: 9b1f55610800b91b721d042bf7f33b58179237d1
prerequisite-patch-id: b0418c707db13f514400956596e9ebe91c25bba0