[v2,0/7] Convert MIPI HSI DT bindings to YAML

Message

Sebastian Reichel March 27, 2024, 7:11 p.m. UTC

Hi,

This converts all MIPI HSI subystem DT bindings to YAML.
I ran the following tests:

1. Check binding files
   make -j$(nproc) dt_binding_check DT_SCHEMA_FILES=/hsi/
2. Check OMAP3 and nokia-modem DT
   make -j$(nproc) CHECK_DTBS=y ti/omap/omap3-n900.dtb ti/omap/omap3-n950.dtb ti/omap/omap3-n9.dtb
3. Check OMAP4 DT (OMAP4 HSI is not used upstream, so one is enough)
   make -j$(nproc) CHECK_DTBS=y ti/omap/omap4-droid4-xt894.dtb

FWIW I noticed a lots of warnings for OMAP3 & OMAP4, but
none related to HSI/SSI.

Greetings,

-- Sebastian

---
Changes in v2:
- Link to v1: https://lore.kernel.org/r/[e-mail]
- fixed, that "hsi-client" is not a generic node name
- hsi-client.yaml needs to use oneOf instead of anyOf for the hsi-mode requirement
- change nokia-modem.yaml to nokia,modem.yaml
- add hsi-channel-ids constraints to nokia modem binding; I had to also add
  $ref: /schemas/types.yaml#/definitions/uint32-array again, because otherwise
  the tooling complained about the example DT having not enough IDs for
  [[0], [1], [2], [3]]. It does properly inherit the hsi-client.yaml, though.
  If I drop the constraints from the modem binding and change the generic binding
  to require 5 IDs, the tooling does complain. So I think this is a bug in the DT
  checking tool. For now readding the ref again seems to be a good enough workaround.
- changed node name to "modem" for the nokia modem
- renamed ti,ssi-cawake-gpio to ti,ssi-cawake-gpios
- changed ssi-port@ & hsi-port@ to just port@
- dropped blank line in omap-ssi binding
- moved additionalProperties before the examples in omap-ssi binding
- fixed indentation for the omaps-ssi example in the binding
- added patches fixing up OMAP3 & OMAP4 DT files according to the latest changes

---
Sebastian Reichel (7):
      dt-bindings: hsi: hsi-client: convert to YAML
      dt-bindings: hsi: nokia-modem: convert to YAML
      dt-bindings: hsi: omap-ssi: convert to YAML
      ARM: dts: omap4: fix hsi-port node name
      ARM: dts: omap3: fix ssi-port node name
      ARM: dts: omap3: fix ti,ssi-cawake-gpio property name
      ARM: dts: omap3: use generic node name for hsi clients

 .../devicetree/bindings/hsi/client-devices.txt     |  44 -----
 .../devicetree/bindings/hsi/hsi-client.yaml        |  81 ++++++++++
 .../devicetree/bindings/hsi/nokia,modem.yaml       | 106 ++++++++++++
 .../devicetree/bindings/hsi/nokia-modem.txt        |  59 -------
 Documentation/devicetree/bindings/hsi/omap-ssi.txt | 102 ------------
 .../devicetree/bindings/hsi/ti,omap-ssi.yaml       | 177 +++++++++++++++++++++
 arch/arm/boot/dts/ti/omap/omap3-n900.dts           |   4 +-
 arch/arm/boot/dts/ti/omap/omap3-n950-n9.dtsi       |   4 +-
 arch/arm/boot/dts/ti/omap/omap3.dtsi               |   4 +-
 arch/arm/boot/dts/ti/omap/omap4-l4.dtsi            |   4 +-
 10 files changed, 372 insertions(+), 213 deletions(-)
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20240325-hsi-dt-binding-a5d662e3d601

Best regards,