Show patches with: none      |   50004 patches
« 1 2 ... 384 385 386 … 500 501 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[2/7,v3] usb: otg: Remove one unnecessary I2C read request. - - - --- 2011-02-16 Kalliguddi, Hema felipebalbi New
[1/7,v3] usb: otg: enable regulator only on cable/device connect - - - --- 2011-02-16 Kalliguddi, Hema felipebalbi New
[V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL - - - --- 2011-02-16 Jarkko Nikula khilman Not Applicable
[2/2] omap4: 4430sdp: mux GPIO_157 to safe mode - - - --- 2011-02-16 Anand Gadiyar felipebalbi New
[1/2] omap4: 4430sdp: drop ehci support - - - --- 2011-02-16 Anand Gadiyar felipebalbi New
OMAP3 & USB NFS root - - - --- 2011-02-16 Felipe Balbi felipebalbi New
usb: ehci-omap: add support for TLL mode on OMAP4 - - - --- 2011-02-16 Anand Gadiyar felipebalbi New
omap4: usb: explicitly configure MUSB pads - - - --- 2011-02-16 Anand Gadiyar felipebalbi New
[00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx - - - --- 2011-02-16 Rajendra Nayak pwsan Awaiting Upstream
[3/3] OMAP36xx PM: Updated C state latencies for OMAP3630 - - - --- 2011-02-16 Sripathy, Vishwanath khilman Changes Requested
[2/3] OMAP3 PM: Update only enabled C states - - - --- 2011-02-16 Sripathy, Vishwanath khilman Changes Requested
[1/3] OMAP3 PM: Deny clock gating only for safe state - - - --- 2011-02-16 Sripathy, Vishwanath khilman Changes Requested
OMAP3 & USB NFS root - - - --- 2011-02-16 Felipe Balbi felipebalbi New
arm: omap3beagle: init musb default role by Kconfig - - - --- 2011-02-16 Felipe Balbi felipebalbi New
[11/11] OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[10/11] OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[09/11] OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[08/11] OMAP2430/3xxx: clock: add modem clock autoidle support - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[07/11] OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[06/11] OMAP2420: clock: add sdrc_ick - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[05/11] OMAP2+: clock: add interface clock type code with autoidle support - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[04/11] OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[03/11] OMAP2xxx: clock: add clockfw autoidle support for APLLs - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[02/11] OMAP2: clock: add DPLL autoidle support - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[01/11] OMAP2+: clock: disable autoidle on all clocks during clock init - - - --- 2011-02-16 Paul Walmsley pwsan Awaiting Upstream
[3/3] OMAP4: Enable Turbo and Nitro OPP for OMAP4 - - - --- 2011-02-16 Gulati, Shweta khilman Changes Requested
[2/3] OMAP2+: Replace Voltage values with Macros. - - - --- 2011-02-16 Gulati, Shweta khilman Changes Requested
[1/3] OMAP4: Revise MPU Voltage rail values. - - - --- 2011-02-16 Gulati, Shweta khilman Changes Requested
[v11,18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device - - - --- 2011-02-16 Sumit Semwal tomba Accepted
[v4,1/3] OMAP2PLUS: DSS2: Add OMAP4 Kconfig support - - - --- 2011-02-16 Sumit Semwal tomba Accepted
[v2] i2c-omap: Double clear of ARDY status in IRQ handler - - - --- 2011-02-16 J, KEERTHY tmlind Awaiting Upstream
[v4,1/3] OMAP2PLUS: DSS2: Add OMAP4 Kconfig support - - - --- 2011-02-16 Sumit Semwal tomba Superseded
[v7,4/4] TI816X: Add low level debug support - - - --- 2011-02-15 Hemant Pedanekar tmlind Accepted
[v7,3/4] TI816X: Create board support and enable build for TI816X EVM - - - --- 2011-02-15 Hemant Pedanekar tmlind Accepted
[v7,2/4] TI816X: Update common OMAP machine specific sources - - - --- 2011-02-15 Hemant Pedanekar tmlind Accepted
[v7,1/4] TI816X: Update common omap platform files - - - --- 2011-02-15 Hemant Pedanekar tmlind Accepted
[PATCHv2] omap2/3: dmtimer: Enable autoidle - - - --- 2011-02-15 Tero Kristo khilman Rejected
[v2,1/1] OMAP: IOMMU: add support to callback during fault handling - - - --- 2011-02-15 David Cohen tmlind Superseded
[2/2] OMAP: IOMMU: add support to callback during fault handling - - - --- 2011-02-15 David Cohen tmlind Superseded
[1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg() - - - --- 2011-02-15 David Cohen tmlind Superseded
[6/6] arm: omap2: clksel: fix compile warning - - - --- 2011-02-15 Felipe Balbi tmlind Superseded
[5/6] arm: omap2: irq: fix compile warning: - - - --- 2011-02-15 Felipe Balbi tmlind Superseded
[4/6] arm: omap1: fix a bunch of section mismatches - - - --- 2011-02-15 Felipe Balbi tmlind Superseded
[3/6] arm: omap1: fix compile warnings - - - --- 2011-02-15 Felipe Balbi tmlind Superseded
[2/6] arm: omap1: fix compile warning - - - --- 2011-02-15 Felipe Balbi tmlind Superseded
[1/6] arm: omap: i2c: fix compile warning - - - --- 2011-02-15 Felipe Balbi tmlind Superseded
[v2] OMAP: IOMMU: add missing function declaration - - - --- 2011-02-15 David Cohen tmlind Accepted
[2/6] ARM: pm: add generic CPU suspend/resume support - - - --- 2011-02-15 Russell King - ARM Linux khilman Awaiting Upstream
[2/2] omap3: flash: use pr_err instead of printk - - - --- 2011-02-15 Sanjeev Premi tmlind Accepted
[1/2] omap3: fix minor typos - - - --- 2011-02-15 Sanjeev Premi tmlind Accepted
[7/7,v2] usb: musb: OMAP4430: Fix usb device detection if connected during boot - - - --- 2011-02-15 Kalliguddi, Hema felipebalbi New
[6/7,v2] usb: otg: TWL6030 Save the last event in otg_transceiver - - - --- 2011-02-15 Kalliguddi, Hema felipebalbi New
[5/7,v2] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function. - - - --- 2011-02-15 Kalliguddi, Hema felipebalbi New
[4/7,v2] usb: otg: OMAP4430: Add phy_suspend function pointer to - - - --- 2011-02-15 Kalliguddi, Hema felipebalbi New
[3/7,v2] usb: otg: OMAP4430: Introducing suspend function for power management - - - --- 2011-02-15 Kalliguddi, Hema felipebalbi New
[2/7,v2] usb: otg: Remove one unnecessary I2C read request. - - - --- 2011-02-15 Kalliguddi, Hema felipebalbi New
[1/7,v2] usb: otg: enable regulator only on cable/device connect - - - --- 2011-02-15 Kalliguddi, Hema felipebalbi New
[v9,09/11,RESEND] OMAP: dmtimer: switch-over to platform device driver - - - --- 2011-02-15 Tarun Kanti DebBarma tmlind Superseded
arm: omap3beagle: init musb default role by Kconfig - - - --- 2011-02-15 Bob Liu felipebalbi New
[10/15] cbus: retu: pwrbutton: save device pointer on our structure - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[09/15] cbus: retu: search and replace - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[08/15] cbus: retu: introduce internal read/write functions - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[07/15] cbus: retu: use the devid from platform_data - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[06/15] arm: omap: pass Retu ID via platform_data - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[05/15] arm: omap: cbus: add IDs for Retu and Tahvo - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[04/15] cbus: retu: drop unused PFX macro - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[03/15] cbus: retu: drop the unnecessary spinlock_t - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[02/15] cbus: retu: replace BUG_ON with WARN - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[01/15] cbus: retu: drop retu_get_status - - - --- 2011-02-15 Felipe Balbi tmlind Accepted
[v2,5/5] OMAP: hsmmc: Enable MMC4 and MMC5 on OMAP4 platforms - - - --- 2011-02-15 panduranga_mallireddy@ti.com tmlind Accepted
[v2,4/5] omap: panda: add mmc5/wl1271 device support - - - --- 2011-02-15 panduranga_mallireddy@ti.com tmlind Accepted
[v2,3/5] omap: panda: add fixed regulator device for wlan - - - --- 2011-02-15 panduranga_mallireddy@ti.com tmlind Accepted
[v2,2/5] omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430 - - - --- 2011-02-15 panduranga_mallireddy@ti.com tmlind Accepted
[v2,1/5] omap: panda: wlan board muxing - - - --- 2011-02-15 panduranga_mallireddy@ti.com tmlind Accepted
OMAP: Fix Memory Leaks in Smartreflex driver - - - --- 2011-02-15 Gulati, Shweta khilman Accepted
[V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL - - - --- 2011-02-15 Gulati, Shweta khilman Accepted
[3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption - - - --- 2011-02-15 Santosh Shilimkar tmlind Awaiting Upstream
[8/8] ARM: etm: Support multiple ETMs/PTMs. - - - --- 2011-02-15 Arve Hjønnevåg tmlind Awaiting Upstream
[7/8] ARM: etm: Return the entire trace buffer if it is empty after reset - - - --- 2011-02-15 Arve Hjønnevåg tmlind Awaiting Upstream
[6/8] ARM: etm: Add some missing locks and error checks - - - --- 2011-02-15 Arve Hjønnevåg tmlind Awaiting Upstream
[5/8] ARM: etm: Configure data tracing - - - --- 2011-02-15 Arve Hjønnevåg tmlind Awaiting Upstream
[4/8] ARM: etm: Allow range selection - - - --- 2011-02-15 Arve Hjønnevåg tmlind Awaiting Upstream
[3/8] ARM: etm: Don't try to clear the buffer full status after reading the buffer - - - --- 2011-02-15 Arve Hjønnevåg tmlind Awaiting Upstream
[2/8] ARM: etm: Don't limit tracing to only non-secure code. - - - --- 2011-02-15 Arve Hjønnevåg tmlind Awaiting Upstream
[1/8] ARM: etm: Don't require clock control - - - --- 2011-02-15 Arve Hjønnevåg tmlind Awaiting Upstream
omap: Move omap2_check_revision and omap_sram_init out of map_io - - - --- 2011-02-14 Tony Lindgren tmlind Accepted
[3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption - - - --- 2011-02-14 Andrei Warkentin Awaiting Upstream
omap: dmtimer: Enable autoidle - - - --- 2011-02-14 Tero Kristo khilman Changes Requested
[v9,05/11] OMAP4: hwmod data: add dmtimer - - - --- 2011-02-14 Benoit Cousson Changes Requested
[RESEND] ARM: OMAP: Add chip id recognition for OMAP4 ES2.1 and ES2.2 - - - --- 2011-02-14 Kamat, Nishant tmlind Superseded
[v4,0/5] ARM: omap[34]: Thumb-2 compatibility fixes - - - --- 2011-02-14 tip-bot for Dave Martin khilman Superseded
[v3,2/4] OMAP4: hwmod: add entries for DMIC driver - - - --- 2011-02-14 Benoit Cousson Changes Requested
[RESEND,v6,4/4] TI816X: Add low level debug support - - - --- 2011-02-14 Hemant Pedanekar tmlind Accepted
[RESEND,v6,3/4] TI816X: Create board support and enable build for TI816X EVM - - - --- 2011-02-14 Hemant Pedanekar tmlind Accepted
[RESEND,v6,2/4] TI816X: Update common OMAP machine specific sources - - - --- 2011-02-14 Hemant Pedanekar tmlind Accepted
[RESEND,v6,1/4] TI816X: Update common omap platform files - - - --- 2011-02-14 Hemant Pedanekar tmlind Accepted
[v2,06/13] OMAP4: hwmod data: Add McBSP - - - --- 2011-02-14 Benoit Cousson tmlind Changes Requested
OMAP3 & USB NFS root - - - --- 2011-02-14 Felipe Balbi Superseded
[v4,0/5] ARM: omap[34]: Thumb-2 compatibility fixes - - - --- 2011-02-14 tip-bot for Dave Martin khilman Superseded
[v2,3/7] omap: clock: Add allow_idle/deny_idle support in clkops - - - --- 2011-02-14 Rajendra Nayak pwsan Awaiting Upstream
« 1 2 ... 384 385 386 … 500 501 »