Show patches with: Submitter = J, KEERTHY       |    State = Action Required       |   642 patches
« 1 2 3 4 … 6 7 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL - - - --- 2017-01-16 J, KEERTHY New
thermal: ti-soc-thermal: dra7: Implement Workaround for Errata i813 - - - --- 2015-04-16 J, KEERTHY New
thermal: ti-soc-thermal: Add set_emul_temp hook - - - --- 2016-05-10 J, KEERTHY New
thermal: Switch mode to enabled once the cooling device is bound - - - --- 2015-06-25 J, KEERTHY New
thermal: Schedule a backup thermal shutdown workqueue after a known period of time to tackle failed… - - - --- 2015-12-21 J, KEERTHY New
thermal: omap-thermal: Add notify function to thermal_zone_device_ops - - - --- 2016-02-16 J, KEERTHY New
thermal: of-thermal: Fix setting of set_emul_temp hook - - - --- 2016-06-02 J, KEERTHY New
thermal: core: Allow orderly_poweroff to be called only once - - - --- 2017-04-12 J, KEERTHY New
thermal: core: Add a back up thermal shutdown mechanism - - - --- 2017-03-31 J, KEERTHY New
soc: ti: pm33xx: Enable DS0 for the platforms on which it is functional soc: ti: pm33xx: Enable DS0 for the platforms on which it is functional - - - --- 2018-08-22 J, KEERTHY New
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh 1 - - --- 2019-04-29 J, KEERTHY New
rtc: OMAP: Add support for rtc-only mode - - - --- 2018-07-04 J, KEERTHY New
rtc: OMAP: Add external 32k clock feature - - - --- 2015-03-03 J, KEERTHY New
RTC: Add functionality to read/write rtc scratch registers - - - --- 2016-06-15 J, KEERTHY New
RTC: Add functionality to read/write rtc scratch registers - - - --- 2017-04-18 J, KEERTHY New
regulator: lp87565: Fix the initial voltage range - - - --- 2017-06-20 J, KEERTHY New
regulator: lp87565: Fix the GPL header - - - --- 2017-06-06 J, KEERTHY New
regulator: lp87565: Enable LP87565_BUCK_CTRL_1_FPWM_MP_0_2 - - - --- 2018-04-17 J, KEERTHY New
regulator: lp87565: Add margin while populating ramp_delay - - - --- 2018-04-17 J, KEERTHY New
regulator: lp873x: Update the enable mask for LDOs and BUCKs - - - --- 2017-09-27 J, KEERTHY New
pinctrl: pinctrl-single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs - - - --- 2016-04-13 J, KEERTHY New
pci: dwc: dra7xx: Add shutdown handler to cleanly turn off clocks 1 - - --- 2017-09-06 J, KEERTHY New
net: ethernet: ti: cpsw: Push the request_irq function to the end of probe - - - --- 2017-07-20 J, KEERTHY New
net: ethernet: ti: cpsw: Fix suspend/resume break net: ethernet: ti: cpsw: Fix suspend/resume break - - - --- 2019-06-22 J, KEERTHY New
mfd: twl4030: Enabling twl4030_wdt and pwrbutton only for Triton - - - --- 2011-02-23 J, KEERTHY New
mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe - - - --- 2018-12-06 J, KEERTHY New
mfd: Palmas: Remove code which is not necessary for a device tree boot - - - --- 2013-06-17 J, KEERTHY New
mfd: Palmas: Introduce features to select the appropriate modules present in the palmas variant - - - --- 2013-06-14 J, KEERTHY New
mfd: palmas: Assign the right powerhold mask for tps65917 - - - --- 2017-10-24 J, KEERTHY New
mfd: lp873x: Add lp873x PMIC support - - - --- 2016-05-05 J, KEERTHY New
MAINTAINERS: ti-soc-thermal: add a co-maintainer and update the entry - - - --- 2016-03-16 J, KEERTHY New
gpio: lp87565: Add support for GPIO - - - --- 2017-06-01 J, KEERTHY New
dt-bindings: power: Introduce suspend states supported properties dt-bindings: power: Introduce suspend states supported properties - - - --- 2018-09-12 J, KEERTHY New
Documentation: devicetree: bindings: regulator: palmas-pmic.txt 1 - - --- 2016-03-29 J, KEERTHY New
clocksource: timer-ti-dm: Remove unused omap_dm_timer_set_load_start clocksource: timer-ti-dm: Remove unused omap_dm_timer_set_load_start - - - --- 2019-04-04 J, KEERTHY New
clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag - - - --- 2018-08-02 J, KEERTHY New
clocksource: ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs clocksource: ti-32k: Add CLOCK_SOURCE_SUSPEND_NONSTOP flag for non-am43 SoCs 1 - - --- 2018-08-07 J, KEERTHY New
clk: ti: dra7xx: Reset the mcasp3_ahclkx_mux clock value - - - --- 2017-09-06 J, KEERTHY New
clk: ti: divider: Add the table parsing to get the best divider value 1 - - --- 2016-12-02 J, KEERTHY New
clk: Add functions to save and restore clock/dpll context en-masse - - - --- 2017-04-18 J, KEERTHY New
ARM: OMAP2+: OMAP44XX: Clock: Correct the clock identifiers for OMAP4460 and OMAP4430 - - - --- 2013-01-18 J, KEERTHY New
ARM: OMAP2+: OMAP44XX: Clock: Correct the clock identifiers for OMAP4460 and OMAP4430 - - - --- 2013-01-25 J, KEERTHY New
ARM: OMAP2+: OMAP44XX: Clock: Correct the clock - - - --- 2013-01-18 J, KEERTHY New
arm: omap: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1 - - - --- 2017-09-06 J, KEERTHY New
ARM: OMAP: DRA7: Make use of omap_revision information for soc_is* calls - - - --- 2016-02-17 J, KEERTHY New
ARM: OMAP: DRA7: hwmod: Make gpmc software supervised as the smart idle is broken - - - --- 2015-01-13 J, KEERTHY New
ARM: hwmod: RTC: Don't assume lock/unlock will be called with irq enabled - - - --- 2018-06-21 J, KEERTHY New
ARM: dts: Remove min and max voltage values for dcdc3 - - - --- 2017-06-02 J, KEERTHY New
ARM: dts: DRA76-EVM: Set powerhold property for tps65917 - - - --- 2017-10-24 J, KEERTHY New
arm: dts: dra72x: Disable usb4_tm target module arm: dts: dra72x: Disable usb4_tm target module - - - --- 2019-06-04 J, KEERTHY New
ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux - - - --- 2017-09-06 J, KEERTHY New
ARM: dts: dra7: Correct clock tree for sys_32k_ck - - - --- 2016-03-14 J, KEERTHY New
ARM: DTS: DRA7: Add TPS659038 PMIC nodes - - - --- 2013-08-26 J, KEERTHY New
ARM: dts: dra7: Add power hold and power controller properties to palmas - - - --- 2017-04-13 J, KEERTHY New
arm: dts: da850: Add interrupt-controller property to gpio node - - - --- 2017-05-24 J, KEERTHY New
arm: dts: AM57XX: Correct the thermal thresholds 1 - - --- 2016-02-08 J, KEERTHY New
arm: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply arm: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply - - - --- 2018-09-21 J, KEERTHY New
ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218 - - - --- 2016-06-15 J, KEERTHY New
arm: dts: am4372: setup rtc as system-power-controller arm: dts: am4372: setup rtc as system-power-controller - - - --- 2018-07-25 J, KEERTHY New
ARM: dts: AM4372: Add the am4372-rtc compatible string - - - --- 2015-08-07 J, KEERTHY New
ARM: dts: add dtsi for palmas - - - --- 2013-06-07 J, KEERTHY New
ARM: Build failures with CONFIG_HAVE_RCU_TABLE_FREE=y on linux-next ARM: Build failures with CONFIG_HAVE_RCU_TABLE_FREE=y on linux-next - - - --- 2018-07-27 J, KEERTHY New
ARM: AM43XX: hwmod: Fix RSTST register offset for pruss - - - --- 2016-06-20 J, KEERTHY New
ARM: AM33xx: PRM: Remove wrongly defined RSTST offset for PER Domain - - 1 --- 2016-06-21 J, KEERTHY New
ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function - - - --- 2017-11-10 J, KEERTHY New
[v9,8/9] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops 1 1 - --- 2018-01-24 J, KEERTHY New
[v9,3/3] regulator: lp873x: Change the MFD config option as per latest naming 1 - - --- 2016-08-31 J, KEERTHY New
[v9,2/3] gpio: lp873x: Add support for General Purpose Outputs 1 - - --- 2016-08-31 J, KEERTHY New
[v9,1/3] mfd: lp873x: Add lp873x PMIC support - - - --- 2016-08-31 J, KEERTHY New
[v8,8/9] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops 1 1 - --- 2018-01-24 J, KEERTHY New
[v8,5/5] regulator: tps65218: Remove all the compatibles 1 - - --- 2016-09-19 J, KEERTHY New
[v8,4/5] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate 1 - - --- 2016-09-19 J, KEERTHY New
[v8,3/5] input: tps65218-pwrbutton: Add platform_device_id table 1 - - --- 2016-09-19 J, KEERTHY New
[v8,3/3] regulator: lp873x: Change the MFD config option as per latest naming 1 - - --- 2016-08-12 J, KEERTHY New
[v8,2/5] Documentation: regulator: tps65218: Update examples 1 - - --- 2016-09-19 J, KEERTHY New
[v8,2/3] gpio: lp873x: Add support for General Purpose Outputs 1 - - --- 2016-08-12 J, KEERTHY New
[v8,1/5] mfd: tps65218: Remove redundant read wrapper 1 - - --- 2016-09-19 J, KEERTHY New
[v8,1/3] mfd: lp873x: Add lp873x PMIC support - - - --- 2016-08-12 J, KEERTHY New
[v7,9/9] arm: omap: pdata-quirks: Remove unused timer pdata - 1 1 --- 2018-01-09 J, KEERTHY New
[v7,8/9] pwm: pwm-omap-dmtimer: Adapt driver to utilize dmtimer pdata ops 1 1 - --- 2018-01-09 J, KEERTHY New
[v7,7/9] clocksource: timer-dm: Hook device platform data if not already assigned - 1 - --- 2018-01-09 J, KEERTHY New
[v7,6/9] clocksource: dmtimer: Populate the timer ops to the pdata - 1 1 --- 2018-01-09 J, KEERTHY New
[v7,5/9] dmtimer: Add timer ops to the platform data structure - 1 1 --- 2018-01-09 J, KEERTHY New
[v7,5/5] regulator: tps65218: Remove all the compatibles 1 - - --- 2016-08-10 J, KEERTHY New
[v7,4/9] arm: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource - 1 1 --- 2018-01-09 J, KEERTHY New
[v7,4/5] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate 1 - - --- 2016-08-10 J, KEERTHY New
[v7,3/9] arm: omap: Move dmtimer.h out of plat-omap - 1 1 --- 2018-01-09 J, KEERTHY New
[v7,3/3] regulator: lp873x: Change the MFD config option as per latest naming - - - --- 2016-08-10 J, KEERTHY New
[v7,2/9] arm: omap: timer: Wrap the inline functions under OMAP2PLUS define - 1 1 --- 2018-01-09 J, KEERTHY New
[v7,2/5] Documentation: regulator: tps65218: Update examples 1 - - --- 2016-08-10 J, KEERTHY New
[v7,1/9] clocksource: dmtimer: Remove all the exports - 1 1 --- 2018-01-09 J, KEERTHY New
[v6] ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes - - - --- 2013-06-13 J, KEERTHY New
[v6,6/6] regulator: tps65218: Remove all the compatibles 1 - - --- 2016-06-28 J, KEERTHY New
[v6,5/6] mfd: tps65218: Use mfd_add_devices instead of of_platform_populate 1 - - --- 2016-06-28 J, KEERTHY New
[v6,4/6] gpio: tps65218-gpio: Add platform_device_id table 1 - - --- 2016-06-28 J, KEERTHY New
[v6,4/4] regulator: lp873x: Change the MFD config option as per latest naming 1 - - --- 2016-08-08 J, KEERTHY New
[v6,3/6] input: tps65218-pwrbutton: Add platform_device_id table 1 - - --- 2016-06-28 J, KEERTHY New
[v6,3/4] gpio: lp873x: Add support for General Purpose Outputs 1 - - --- 2016-08-08 J, KEERTHY New
[v6,2/6] Documentation: regulator: tps65218: Update examples 1 - - --- 2016-06-28 J, KEERTHY New
[v6,2/4] mfd: lp873x: Add lp873x PMIC support - - - --- 2016-08-08 J, KEERTHY New
« 1 2 3 4 … 6 7 »