diff mbox

[7/9] omap3isp: Add CSI2 interface support

Message ID 1236074816-30018-7-git-send-email-sakari.ailus@maxwell.research.nokia.com (mailing list archive)
State Awaiting Upstream, archived
Headers show

Commit Message

Sakari Ailus March 3, 2009, 10:06 a.m. UTC
Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
---
 drivers/media/video/isp/ispcsi2.c | 2124 +++++++++++++++++++++++++++++++++++++
 drivers/media/video/isp/ispcsi2.h |  232 ++++
 2 files changed, 2356 insertions(+), 0 deletions(-)
 create mode 100644 drivers/media/video/isp/ispcsi2.c
 create mode 100644 drivers/media/video/isp/ispcsi2.h
diff mbox

Patch

diff --git a/drivers/media/video/isp/ispcsi2.c b/drivers/media/video/isp/ispcsi2.c
new file mode 100644
index 0000000..b1d60a8
--- /dev/null
+++ b/drivers/media/video/isp/ispcsi2.c
@@ -0,0 +1,2124 @@ 
+/*
+ * ispcsi2.c
+ *
+ * Driver Library for ISP CSI Control module in TI's OMAP3 Camera ISP
+ * ISP CSI interface and IRQ related APIs are defined here.
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * Contributors:
+ * 	Sergio Aguirre <saaguirre@ti.com>
+ * 	Dominic Curran <dcurran@ti.com>
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/delay.h>
+#include <media/v4l2-common.h>
+
+#include "isp.h"
+#include "ispreg.h"
+#include "ispcsi2.h"
+
+static struct isp_csi2_cfg current_csi2_cfg;
+static struct isp_csi2_cfg_update current_csi2_cfg_update;
+
+static bool update_complexio_cfg1;
+static bool update_phy_cfg0;
+static bool update_phy_cfg1;
+static bool update_ctx_ctrl1[8];
+static bool update_ctx_ctrl2[8];
+static bool update_ctx_ctrl3[8];
+static bool update_timing;
+static bool update_ctrl;
+static bool uses_videoport;
+
+/**
+ * isp_csi2_complexio_lanes_config - Configuration of CSI2 ComplexIO lanes.
+ * @reqcfg: Pointer to structure containing desired lane configuration
+ *
+ * Validates and saves to internal driver memory the passed configuration.
+ * Returns 0 if successful, or -EINVAL if null pointer is passed, invalid
+ * lane position or polarity is set, and if 2 lanes try to occupy the same
+ * position. To apply this settings, use the isp_csi2_complexio_lanes_update()
+ * function just after calling this function.
+ **/
+int isp_csi2_complexio_lanes_config(struct isp_csi2_lanes_cfg *reqcfg)
+{
+	int i;
+	bool pos_occupied[5] = {false, false, false, false, false};
+	struct isp_csi2_lanes_cfg *currlanes = &current_csi2_cfg.lanes;
+	struct isp_csi2_lanes_cfg_update *currlanes_u =
+					&current_csi2_cfg_update.lanes;
+
+	/* Validating parameters sent by driver */
+	if (reqcfg == NULL) {
+		printk(KERN_ERR "Invalid Complex IO Configuration sent by"
+								" sensor\n");
+		goto err_einval;
+	}
+
+	/* Data lanes verification */
+	for (i = 0; i < 4; i++) {
+		if ((reqcfg->data[i].pol > 1) || (reqcfg->data[i].pos > 5)) {
+			printk(KERN_ERR "Invalid CSI-2 Complex IO configuration"
+					" parameters for data lane #%d\n", i);
+			goto err_einval;
+		}
+		if (pos_occupied[reqcfg->data[i].pos - 1] &&
+						reqcfg->data[i].pos > 0) {
+			printk(KERN_ERR "Lane #%d already occupied\n",
+							reqcfg->data[i].pos);
+			goto err_einval;
+		} else
+			pos_occupied[reqcfg->data[i].pos - 1] = true;
+	}
+
+	/* Clock lane verification */
+	if ((reqcfg->clk.pol > 1) || (reqcfg->clk.pos > 5) ||
+						(reqcfg->clk.pos == 0)) {
+		printk(KERN_ERR "Invalid CSI-2 Complex IO configuration"
+						" parameters for clock lane\n");
+		goto err_einval;
+	}
+	if (pos_occupied[reqcfg->clk.pos - 1]) {
+		printk(KERN_ERR "Lane #%d already occupied",
+							reqcfg->clk.pos);
+		goto err_einval;
+	} else
+		pos_occupied[reqcfg->clk.pos - 1] = true;
+
+	for (i = 0; i < 4; i++) {
+		if (currlanes->data[i].pos != reqcfg->data[i].pos) {
+			currlanes->data[i].pos = reqcfg->data[i].pos;
+			currlanes_u->data[i] = true;
+			update_complexio_cfg1 = true;
+		}
+		if (currlanes->data[i].pol != reqcfg->data[i].pol) {
+			currlanes->data[i].pol = reqcfg->data[i].pol;
+			currlanes_u->data[i] = true;
+			update_complexio_cfg1 = true;
+		}
+	}
+
+	if (currlanes->clk.pos != reqcfg->clk.pos) {
+		currlanes->clk.pos = reqcfg->clk.pos;
+		currlanes_u->clk = true;
+		update_complexio_cfg1 = true;
+	}
+	if (currlanes->clk.pol != reqcfg->clk.pol) {
+		currlanes->clk.pol = reqcfg->clk.pol;
+		currlanes_u->clk = true;
+		update_complexio_cfg1 = true;
+	}
+	return 0;
+err_einval:
+	return -EINVAL;
+}
+
+/**
+ * isp_csi2_complexio_lanes_update - Applies CSI2 ComplexIO lanes configuration.
+ * @force_update: Flag to force rewrite of registers, even if they haven't been
+ *                updated with the isp_csi2_complexio_lanes_config() function.
+ *
+ * It only saves settings when they were previously updated using the
+ * isp_csi2_complexio_lanes_config() function, unless the force_update flag is
+ * set to true.
+ * Always returns 0.
+ **/
+int isp_csi2_complexio_lanes_update(bool force_update)
+{
+	struct isp_csi2_lanes_cfg *currlanes = &current_csi2_cfg.lanes;
+	struct isp_csi2_lanes_cfg_update *currlanes_u =
+					&current_csi2_cfg_update.lanes;
+	u32 reg;
+	int i;
+
+	if (!update_complexio_cfg1 && !force_update)
+		return 0;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1);
+	for (i = 0; i < 4; i++) {
+		if (currlanes_u->data[i] || force_update) {
+			reg &= ~(ISPCSI2_COMPLEXIO_CFG1_DATA_POL_MASK(i + 1) |
+				ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_MASK(i +
+									1));
+			reg |= (currlanes->data[i].pol <<
+				ISPCSI2_COMPLEXIO_CFG1_DATA_POL_SHIFT(i + 1));
+			reg |= (currlanes->data[i].pos <<
+				ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(i +
+									1));
+			currlanes_u->data[i] = false;
+		}
+	}
+
+	if (currlanes_u->clk || force_update) {
+		reg &= ~(ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_MASK |
+				ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_MASK);
+		reg |= (currlanes->clk.pol <<
+				ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_SHIFT);
+		reg |= (currlanes->clk.pos <<
+				ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT);
+		currlanes_u->clk = false;
+	}
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1);
+
+	update_complexio_cfg1 = false;
+	return 0;
+}
+
+/**
+ * isp_csi2_complexio_lanes_get - Gets CSI2 ComplexIO lanes configuration.
+ *
+ * Gets settings from HW registers and fills in the internal driver memory
+ * Always returns 0.
+ **/
+int isp_csi2_complexio_lanes_get(void)
+{
+	struct isp_csi2_lanes_cfg *currlanes = &current_csi2_cfg.lanes;
+	struct isp_csi2_lanes_cfg_update *currlanes_u =
+					&current_csi2_cfg_update.lanes;
+	u32 reg;
+	int i;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1);
+	for (i = 0; i < 4; i++) {
+		currlanes->data[i].pol = (reg &
+				ISPCSI2_COMPLEXIO_CFG1_DATA_POL_MASK(i + 1)) >>
+				ISPCSI2_COMPLEXIO_CFG1_DATA_POL_SHIFT(i + 1);
+		currlanes->data[i].pos = (reg &
+			ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_MASK(i + 1)) >>
+			ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(i + 1);
+		currlanes_u->data[i] = false;
+	}
+	currlanes->clk.pol = (reg & ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_MASK) >>
+					ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_SHIFT;
+	currlanes->clk.pos = (reg &
+				ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_MASK) >>
+				ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT;
+	currlanes_u->clk = false;
+
+	update_complexio_cfg1 = false;
+	return 0;
+}
+
+/**
+ * isp_csi2_complexio_power_status - Gets CSI2 ComplexIO power status.
+ *
+ * Returns 3 possible valid states: ISP_CSI2_POWER_OFF, ISP_CSI2_POWER_ON,
+ * and ISP_CSI2_POWER_ULPW.
+ **/
+static enum isp_csi2_power_cmds isp_csi2_complexio_power_status(void)
+{
+	enum isp_csi2_power_cmds ret;
+	u32 reg;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1) &
+					ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_MASK;
+	switch (reg) {
+	case ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_OFF:
+		ret = ISP_CSI2_POWER_OFF;
+		break;
+	case ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_ON:
+		ret = ISP_CSI2_POWER_ON;
+		break;
+	case ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_ULPW:
+		ret = ISP_CSI2_POWER_ULPW;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return ret;
+}
+
+/**
+ * isp_csi2_complexio_power_autoswitch - Sets CSI2 ComplexIO power autoswitch.
+ * @enable: Sets or clears the autoswitch function enable flag.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_complexio_power_autoswitch(bool enable)
+{
+	u32 reg;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1);
+	reg &= ~ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_MASK;
+
+	if (enable)
+		reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_ENABLE;
+	else
+		reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_DISABLE;
+
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1);
+	return 0;
+}
+
+/**
+ * isp_csi2_complexio_power - Sets the desired power command for CSI2 ComplexIO.
+ * @power_cmd: Power command to be set.
+ *
+ * Returns 0 if successful, or -EBUSY if the retry count is exceeded.
+ **/
+int isp_csi2_complexio_power(enum isp_csi2_power_cmds power_cmd)
+{
+	enum isp_csi2_power_cmds current_state;
+	u32 reg;
+	u8 retry_count;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1) &
+					~ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_MASK;
+	switch (power_cmd) {
+	case ISP_CSI2_POWER_OFF:
+		reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_OFF;
+		break;
+	case ISP_CSI2_POWER_ON:
+		reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_ON;
+		break;
+	case ISP_CSI2_POWER_ULPW:
+		reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_ULPW;
+		break;
+	default:
+		printk(KERN_ERR "CSI2: ERROR - Wrong Power command!\n");
+		return -EINVAL;
+	}
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1);
+
+	retry_count = 0;
+	do {
+		udelay(50);
+		current_state = isp_csi2_complexio_power_status();
+
+		if (current_state != power_cmd) {
+			printk(KERN_DEBUG "CSI2: Complex IO power command not"
+								" yet taken.");
+			if (++retry_count < 100) {
+				printk(KERN_DEBUG " Retrying...\n");
+				udelay(50);
+			} else {
+				printk(KERN_DEBUG " Retry count exceeded!\n");
+			}
+		}
+	} while ((current_state != power_cmd) && (retry_count < 100));
+
+	if (retry_count == 100)
+		return -EBUSY;
+
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_frame_mode - Configure if_en behaviour for CSI2
+ * @frame_mode: Desired action for IF_EN switch off. 0 - disable IF immediately
+ *              1 - disable after all Frame end Code is received in all
+ *              contexts.
+ *
+ * Validates and saves to internal driver memory the passed configuration.
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_config_frame_mode(enum isp_csi2_frame_mode frame_mode)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+
+	if (currctrl->frame_mode != frame_mode) {
+		currctrl->frame_mode = frame_mode;
+		currctrl_u->frame_mode = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_vp_clk_enable - Enables/disables CSI2 Videoport clock.
+ * @vp_clk_enable: Boolean value to specify the Videoport clock state.
+ *
+ * Validates and saves to internal driver memory the passed configuration.
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_config_vp_clk_enable(bool vp_clk_enable)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+
+	if (currctrl->vp_clk_enable != vp_clk_enable) {
+		currctrl->vp_clk_enable = vp_clk_enable;
+		currctrl_u->vp_clk_enable = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_vp_only_enable - Sets CSI2 Videoport clock as exclusive
+ * @vp_only_enable: Boolean value to specify if the Videoport clock is
+ *                  exclusive, setting the OCP port as disabled.
+ *
+ * Validates and saves to internal driver memory the passed configuration.
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_config_vp_only_enable(bool vp_only_enable)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+
+	if (currctrl->vp_only_enable != vp_only_enable) {
+		currctrl->vp_only_enable = vp_only_enable;
+		currctrl_u->vp_only_enable = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_vp_out_ctrl - Sets CSI2 Videoport clock divider
+ * @vp_out_ctrl: Divider value for setting videoport clock frequency based on
+ *               OCP port frequency, valid dividers are between 1 and 4.
+ *
+ * Validates and saves to internal driver memory the passed configuration.
+ * Returns 0 if successful, or -EINVAL if wrong divider value is passed.
+ **/
+int isp_csi2_ctrl_config_vp_out_ctrl(u8 vp_out_ctrl)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+
+	if ((vp_out_ctrl == 0) || (vp_out_ctrl > 4)) {
+		printk(KERN_ERR "CSI2: Wrong divisor value. Must be between"
+								" 1 and 4");
+		return -EINVAL;
+	}
+
+	if (currctrl->vp_out_ctrl != vp_out_ctrl) {
+		currctrl->vp_out_ctrl = vp_out_ctrl;
+		currctrl_u->vp_out_ctrl = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_debug_enable - Sets CSI2 debug
+ * @debug_enable: Boolean for setting debug configuration on CSI2.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_config_debug_enable(bool debug_enable)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+
+	if (currctrl->debug_enable != debug_enable) {
+		currctrl->debug_enable = debug_enable;
+		currctrl_u->debug_enable = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_burst_size - Sets CSI2 burst size.
+ * @burst_size: Burst size of the memory saving capability of receiver.
+ *
+ * Returns 0 if successful, or -EINVAL if burst size is wrong.
+ **/
+int isp_csi2_ctrl_config_burst_size(u8 burst_size)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+	if (burst_size > 3) {
+		printk(KERN_ERR "CSI2: Wrong burst size. Must be between"
+								" 0 and 3");
+		return -EINVAL;
+	}
+
+	if (currctrl->burst_size != burst_size) {
+		currctrl->burst_size = burst_size;
+		currctrl_u->burst_size = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_ecc_enable - Enables ECC on CSI2 Receiver
+ * @ecc_enable: Boolean to enable/disable the CSI2 receiver ECC handling.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_config_ecc_enable(bool ecc_enable)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+
+	if (currctrl->ecc_enable != ecc_enable) {
+		currctrl->ecc_enable = ecc_enable;
+		currctrl_u->ecc_enable = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_ecc_enable - Enables ECC on CSI2 Receiver
+ * @ecc_enable: Boolean to enable/disable the CSI2 receiver ECC handling.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_config_secure_mode(bool secure_mode)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+
+	if (currctrl->secure_mode != secure_mode) {
+		currctrl->secure_mode = secure_mode;
+		currctrl_u->secure_mode = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_config_if_enable - Enables CSI2 Receiver interface.
+ * @if_enable: Boolean to enable/disable the CSI2 receiver interface.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_config_if_enable(bool if_enable)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+
+	if (currctrl->if_enable != if_enable) {
+		currctrl->if_enable = if_enable;
+		currctrl_u->if_enable = true;
+		update_ctrl = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_update - Applies CSI2 control configuration.
+ * @force_update: Flag to force rewrite of registers, even if they haven't been
+ *                updated with the isp_csi2_ctrl_config_*() functions.
+ *
+ * It only saves settings when they were previously updated using the
+ * isp_csi2_ctrl_config_*() functions, unless the force_update flag is
+ * set to true.
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_update(bool force_update)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+	u32 reg;
+
+	if (update_ctrl || force_update) {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTRL);
+		if (currctrl_u->frame_mode || force_update) {
+			reg &= ~ISPCSI2_CTRL_FRAME_MASK;
+			if (currctrl->frame_mode)
+				reg |= ISPCSI2_CTRL_FRAME_DISABLE_FEC;
+			else
+				reg |= ISPCSI2_CTRL_FRAME_DISABLE_IMM;
+			currctrl_u->frame_mode = false;
+		}
+		if (currctrl_u->vp_clk_enable || force_update) {
+			reg &= ~ISPCSI2_CTRL_VP_CLK_EN_MASK;
+			if (currctrl->vp_clk_enable)
+				reg |= ISPCSI2_CTRL_VP_CLK_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTRL_VP_CLK_EN_DISABLE;
+			currctrl_u->vp_clk_enable = false;
+		}
+		if (currctrl_u->vp_only_enable || force_update) {
+			reg &= ~ISPCSI2_CTRL_VP_ONLY_EN_MASK;
+			uses_videoport = currctrl->vp_only_enable;
+			if (currctrl->vp_only_enable)
+				reg |= ISPCSI2_CTRL_VP_ONLY_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTRL_VP_ONLY_EN_DISABLE;
+			currctrl_u->vp_only_enable = false;
+		}
+		if (currctrl_u->vp_out_ctrl || force_update) {
+			reg &= ~ISPCSI2_CTRL_VP_OUT_CTRL_MASK;
+			reg |= (currctrl->vp_out_ctrl - 1) <<
+						ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT;
+			currctrl_u->vp_out_ctrl = false;
+		}
+		if (currctrl_u->debug_enable || force_update) {
+			reg &= ~ISPCSI2_CTRL_DBG_EN_MASK;
+			if (currctrl->debug_enable)
+				reg |= ISPCSI2_CTRL_DBG_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTRL_DBG_EN_DISABLE;
+			currctrl_u->debug_enable = false;
+		}
+		if (currctrl_u->burst_size || force_update) {
+			reg &= ~ISPCSI2_CTRL_BURST_SIZE_MASK;
+			reg |= currctrl->burst_size <<
+						ISPCSI2_CTRL_BURST_SIZE_SHIFT;
+			currctrl_u->burst_size = false;
+		}
+		if (currctrl_u->ecc_enable || force_update) {
+			reg &= ~ISPCSI2_CTRL_ECC_EN_MASK;
+			if (currctrl->ecc_enable)
+				reg |= ISPCSI2_CTRL_ECC_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTRL_ECC_EN_DISABLE;
+			currctrl_u->ecc_enable = false;
+		}
+		if (currctrl_u->secure_mode || force_update) {
+			reg &= ~ISPCSI2_CTRL_SECURE_MASK;
+			if (currctrl->secure_mode)
+				reg |= ISPCSI2_CTRL_SECURE_ENABLE;
+			else
+				reg |= ISPCSI2_CTRL_SECURE_DISABLE;
+			currctrl_u->secure_mode = false;
+		}
+		if (currctrl_u->if_enable || force_update) {
+			reg &= ~ISPCSI2_CTRL_IF_EN_MASK;
+			if (currctrl->if_enable)
+				reg |= ISPCSI2_CTRL_IF_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTRL_IF_EN_DISABLE;
+			currctrl_u->if_enable = false;
+		}
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTRL);
+		update_ctrl = false;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctrl_get - Gets CSI2 control configuration
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctrl_get(void)
+{
+	struct isp_csi2_ctrl_cfg *currctrl = &current_csi2_cfg.ctrl;
+	struct isp_csi2_ctrl_cfg_update *currctrl_u =
+						&current_csi2_cfg_update.ctrl;
+	u32 reg;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTRL);
+	currctrl->frame_mode = (reg & ISPCSI2_CTRL_FRAME_MASK) >>
+						ISPCSI2_CTRL_FRAME_SHIFT;
+	currctrl_u->frame_mode = false;
+
+	if ((reg & ISPCSI2_CTRL_VP_CLK_EN_MASK) ==
+						ISPCSI2_CTRL_VP_CLK_EN_ENABLE)
+		currctrl->vp_clk_enable = true;
+	else
+		currctrl->vp_clk_enable = false;
+	currctrl_u->vp_clk_enable = false;
+
+	if ((reg & ISPCSI2_CTRL_VP_ONLY_EN_MASK) ==
+						ISPCSI2_CTRL_VP_ONLY_EN_ENABLE)
+		currctrl->vp_only_enable = true;
+	else
+		currctrl->vp_only_enable = false;
+	uses_videoport = currctrl->vp_only_enable;
+	currctrl_u->vp_only_enable = false;
+
+	currctrl->vp_out_ctrl = ((reg & ISPCSI2_CTRL_VP_OUT_CTRL_MASK) >>
+					ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT) + 1;
+	currctrl_u->vp_out_ctrl = false;
+
+	if ((reg & ISPCSI2_CTRL_DBG_EN_MASK) == ISPCSI2_CTRL_DBG_EN_ENABLE)
+		currctrl->debug_enable = true;
+	else
+		currctrl->debug_enable = false;
+	currctrl_u->debug_enable = false;
+
+	currctrl->burst_size = (reg & ISPCSI2_CTRL_BURST_SIZE_MASK) >>
+					ISPCSI2_CTRL_BURST_SIZE_SHIFT;
+	currctrl_u->burst_size = false;
+
+	if ((reg & ISPCSI2_CTRL_ECC_EN_MASK) == ISPCSI2_CTRL_ECC_EN_ENABLE)
+		currctrl->ecc_enable = true;
+	else
+		currctrl->ecc_enable = false;
+	currctrl_u->ecc_enable = false;
+
+	if ((reg & ISPCSI2_CTRL_SECURE_MASK) == ISPCSI2_CTRL_SECURE_ENABLE)
+		currctrl->secure_mode = true;
+	else
+		currctrl->secure_mode = false;
+	currctrl_u->secure_mode = false;
+
+	if ((reg & ISPCSI2_CTRL_IF_EN_MASK) == ISPCSI2_CTRL_IF_EN_ENABLE)
+		currctrl->if_enable = true;
+	else
+		currctrl->if_enable = false;
+	currctrl_u->if_enable = false;
+
+	update_ctrl = false;
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_validate - Validates the context number value
+ * @ctxnum: Pointer to variable containing context number.
+ *
+ * If the value is not in range (3 bits), it is being ANDed with 0x7 to force
+ * it to be on range.
+ **/
+static void isp_csi2_ctx_validate(u8 *ctxnum)
+{
+	if (*ctxnum > 7) {
+		printk(KERN_ERR "Invalid context number. Forcing valid"
+								" value...\n");
+		*ctxnum &= ~(0x7);
+	}
+}
+
+/**
+ * isp_csi2_ctx_config_virtual_id - Maps a virtual ID with a CSI2 Rx context
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @virtual_id: CSI2 Virtual ID to associate with specified context number.
+ *
+ * Returns 0 if successful, or -EINVAL if Virtual ID is not in range (0-3).
+ **/
+int isp_csi2_ctx_config_virtual_id(u8 ctxnum, u8 virtual_id)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	if (virtual_id > 3) {
+		printk(KERN_ERR "Wrong requested virtual_id\n");
+		return -EINVAL;
+	}
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->virtual_id != virtual_id) {
+		selected_ctx->virtual_id = virtual_id;
+		selected_ctx_u->virtual_id = true;
+		update_ctx_ctrl2[ctxnum] = true;
+	}
+
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_frame_count - Sets frame count to be received in CSI2 Rx.
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @frame_count: Number of frames to acquire.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_config_frame_count(u8 ctxnum, u8 frame_count)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->frame_count != frame_count) {
+		selected_ctx->frame_count = frame_count;
+		selected_ctx_u->frame_count = true;
+		update_ctx_ctrl1[ctxnum] = true;
+	}
+
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_format - Maps a pixel format to a specified context.
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @pixformat: V4L2 structure for pixel format.
+ *
+ * Returns 0 if successful, or -EINVAL if the format is not supported by the
+ * receiver.
+ **/
+int isp_csi2_ctx_config_format(u8 ctxnum, u32 pixformat)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+	struct v4l2_pix_format pix;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	pix.pixelformat = pixformat;
+	switch (pix.pixelformat) {
+	case V4L2_PIX_FMT_RGB565:
+	case V4L2_PIX_FMT_RGB565X:
+	case V4L2_PIX_FMT_YUYV:
+	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_RGB555:
+	case V4L2_PIX_FMT_RGB555X:
+	case V4L2_PIX_FMT_SGRBG10:
+	break;
+	default:
+		printk(KERN_ERR "Context config pixel format unsupported\n");
+		return -EINVAL;
+	}
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	selected_ctx->format = pix;
+	selected_ctx_u->format = true;
+	update_ctx_ctrl2[ctxnum] = true;
+
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_alpha - Sets the alpha value for pixel format
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @alpha: Alpha value.
+ *
+ * Returns 0 if successful, or -EINVAL if the alpha value is bigger than 16383.
+ **/
+int isp_csi2_ctx_config_alpha(u8 ctxnum, u16 alpha)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	if (alpha > 0x3FFF) {
+		printk(KERN_ERR "Wrong alpha value\n");
+		return -EINVAL;
+	}
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->alpha != alpha) {
+		selected_ctx->alpha = alpha;
+		selected_ctx_u->alpha = true;
+		update_ctx_ctrl3[ctxnum] = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_data_offset - Sets the offset between received lines
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @data_offset: Offset between first pixel of each 2 contiguous lines.
+ *
+ * Returns 0 if successful, or -EINVAL if the line offset is bigger than 1023.
+ **/
+int isp_csi2_ctx_config_data_offset(u8 ctxnum, u16 data_offset)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	if (data_offset > 0x3FF) {
+		printk(KERN_ERR "Wrong line offset\n");
+		return -EINVAL;
+	}
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->data_offset != data_offset) {
+		selected_ctx->data_offset = data_offset;
+		selected_ctx_u->data_offset = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_ping_addr - Sets Ping address for CSI2 Rx. buffer saving
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @ping_addr: 32 bit ISP MMU mapped address.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_config_ping_addr(u8 ctxnum, u32 ping_addr)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	ping_addr &= ~(0x1F);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->ping_addr != ping_addr) {
+		selected_ctx->ping_addr = ping_addr;
+		selected_ctx_u->ping_addr = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_pong_addr - Sets Pong address for CSI2 Rx. buffer saving
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @pong_addr: 32 bit ISP MMU mapped address.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_config_pong_addr(u8 ctxnum, u32 pong_addr)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	pong_addr &= ~(0x1F);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->pong_addr != pong_addr) {
+		selected_ctx->pong_addr = pong_addr;
+		selected_ctx_u->pong_addr = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_eof_enabled - Enables EOF signal assertion
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @eof_enabled: Boolean to enable/disable EOF signal assertion on received
+ *               packets.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_config_eof_enabled(u8 ctxnum, bool eof_enabled)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->eof_enabled != eof_enabled) {
+		selected_ctx->eof_enabled = eof_enabled;
+		selected_ctx_u->eof_enabled = true;
+		update_ctx_ctrl1[ctxnum] = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_eol_enabled - Enables EOL signal assertion
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @eol_enabled: Boolean to enable/disable EOL signal assertion on received
+ *               packets.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_config_eol_enabled(u8 ctxnum, bool eol_enabled)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->eol_enabled != eol_enabled) {
+		selected_ctx->eol_enabled = eol_enabled;
+		selected_ctx_u->eol_enabled = true;
+		update_ctx_ctrl1[ctxnum] = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_checksum_enabled - Enables Checksum check in rcvd packets
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @checksum_enabled: Boolean to enable/disable Checksum check on received
+ *                    packets
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_config_checksum_enabled(u8 ctxnum, bool checksum_enabled)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->checksum_enabled != checksum_enabled) {
+		selected_ctx->checksum_enabled = checksum_enabled;
+		selected_ctx_u->checksum_enabled = true;
+		update_ctx_ctrl1[ctxnum] = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_config_enabled - Enables specified CSI2 context
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @enabled: Boolean to enable/disable specified context.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_config_enabled(u8 ctxnum, bool enabled)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (selected_ctx->enabled != enabled) {
+		selected_ctx->enabled = enabled;
+		selected_ctx_u->enabled = true;
+		update_ctx_ctrl1[ctxnum] = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_update - Applies CSI2 context configuration.
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ * @force_update: Flag to force rewrite of registers, even if they haven't been
+ *                updated with the isp_csi2_ctx_config_*() functions.
+ *
+ * It only saves settings when they were previously updated using the
+ * isp_csi2_ctx_config_*() functions, unless the force_update flag is
+ * set to true.
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_update(u8 ctxnum, bool force_update)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+	u32 reg;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	if (update_ctx_ctrl1[ctxnum] || force_update) {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_CTRL1(ctxnum));
+		if (selected_ctx_u->frame_count || force_update) {
+			reg &= ~(ISPCSI2_CTX_CTRL1_COUNT_MASK);
+			reg |= selected_ctx->frame_count <<
+						ISPCSI2_CTX_CTRL1_COUNT_SHIFT;
+			selected_ctx_u->frame_count = false;
+		}
+		if (selected_ctx_u->eof_enabled || force_update) {
+			reg &= ~(ISPCSI2_CTX_CTRL1_EOF_EN_MASK);
+			if (selected_ctx->eof_enabled)
+				reg |= ISPCSI2_CTX_CTRL1_EOF_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTX_CTRL1_EOF_EN_DISABLE;
+			selected_ctx_u->eof_enabled = false;
+		}
+		if (selected_ctx_u->eol_enabled || force_update) {
+			reg &= ~(ISPCSI2_CTX_CTRL1_EOL_EN_MASK);
+			if (selected_ctx->eol_enabled)
+				reg |= ISPCSI2_CTX_CTRL1_EOL_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTX_CTRL1_EOL_EN_DISABLE;
+			selected_ctx_u->eol_enabled = false;
+		}
+		if (selected_ctx_u->checksum_enabled || force_update) {
+			reg &= ~(ISPCSI2_CTX_CTRL1_CS_EN_MASK);
+			if (selected_ctx->checksum_enabled)
+				reg |= ISPCSI2_CTX_CTRL1_CS_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTX_CTRL1_CS_EN_DISABLE;
+			selected_ctx_u->checksum_enabled = false;
+		}
+		if (selected_ctx_u->enabled || force_update) {
+			reg &= ~(ISPCSI2_CTX_CTRL1_CTX_EN_MASK);
+			if (selected_ctx->enabled)
+				reg |= ISPCSI2_CTX_CTRL1_CTX_EN_ENABLE;
+			else
+				reg |= ISPCSI2_CTX_CTRL1_CTX_EN_DISABLE;
+			selected_ctx_u->enabled = false;
+		}
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_CTRL1(ctxnum));
+		update_ctx_ctrl1[ctxnum] = false;
+	}
+
+	if (update_ctx_ctrl2[ctxnum] || force_update) {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_CTRL2(ctxnum));
+		if (selected_ctx_u->virtual_id || force_update) {
+			reg &= ~(ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK);
+			reg |= selected_ctx->virtual_id <<
+					ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT;
+			selected_ctx_u->virtual_id = false;
+		}
+
+		if (selected_ctx_u->format || force_update) {
+			struct v4l2_pix_format *pix;
+			u16 new_format = 0;
+
+			reg &= ~(ISPCSI2_CTX_CTRL2_FORMAT_MASK);
+			pix = &selected_ctx->format;
+			switch (pix->pixelformat) {
+			case V4L2_PIX_FMT_RGB565:
+			case V4L2_PIX_FMT_RGB565X:
+				new_format = 0x22;
+				break;
+			case V4L2_PIX_FMT_YUYV:
+			case V4L2_PIX_FMT_UYVY:
+				if (uses_videoport)
+					new_format = 0x9E;
+				else
+					new_format = 0x1E;
+				break;
+			case V4L2_PIX_FMT_RGB555:
+			case V4L2_PIX_FMT_RGB555X:
+				new_format = 0xA1;
+				break;
+			case V4L2_PIX_FMT_SGRBG10:
+				if (uses_videoport)
+					new_format = 0x12F;
+				else
+					new_format = 0xAB;
+				break;
+			}
+			reg |= (new_format << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT);
+			selected_ctx_u->format = false;
+		}
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_CTRL2(ctxnum));
+		update_ctx_ctrl2[ctxnum] = false;
+	}
+
+	if (update_ctx_ctrl3[ctxnum] || force_update) {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_CTRL3(ctxnum));
+		if (selected_ctx_u->alpha || force_update) {
+			reg &= ~(ISPCSI2_CTX_CTRL3_ALPHA_MASK);
+			reg |= (selected_ctx->alpha <<
+						ISPCSI2_CTX_CTRL3_ALPHA_SHIFT);
+			selected_ctx_u->alpha = false;
+		}
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_CTRL3(ctxnum));
+		update_ctx_ctrl3[ctxnum] = false;
+	}
+
+	if (selected_ctx_u->data_offset) {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_DAT_OFST(ctxnum));
+		reg &= ~ISPCSI2_CTX_DAT_OFST_OFST_MASK;
+		reg |= selected_ctx->data_offset <<
+					ISPCSI2_CTX_DAT_OFST_OFST_SHIFT;
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_DAT_OFST(ctxnum));
+		selected_ctx_u->data_offset = false;
+	}
+
+	if (selected_ctx_u->ping_addr) {
+		reg = selected_ctx->ping_addr;
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_DAT_PING_ADDR(ctxnum));
+		selected_ctx_u->ping_addr = false;
+	}
+
+	if (selected_ctx_u->pong_addr) {
+		reg = selected_ctx->pong_addr;
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_DAT_PONG_ADDR(ctxnum));
+		selected_ctx_u->pong_addr = false;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_get - Gets specific CSI2 Context configuration
+ * @ctxnum: Context number, valid between 0 and 7 values.
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_get(u8 ctxnum)
+{
+	struct isp_csi2_ctx_cfg *selected_ctx;
+	struct isp_csi2_ctx_cfg_update *selected_ctx_u;
+	u32 reg;
+
+	isp_csi2_ctx_validate(&ctxnum);
+
+	selected_ctx = &current_csi2_cfg.contexts[ctxnum];
+	selected_ctx_u = &current_csi2_cfg_update.contexts[ctxnum];
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTX_CTRL1(ctxnum));
+	selected_ctx->frame_count = (reg & ISPCSI2_CTX_CTRL1_COUNT_MASK) >>
+						ISPCSI2_CTX_CTRL1_COUNT_SHIFT;
+	selected_ctx_u->frame_count = false;
+
+	if ((reg & ISPCSI2_CTX_CTRL1_EOF_EN_MASK) ==
+						ISPCSI2_CTX_CTRL1_EOF_EN_ENABLE)
+		selected_ctx->eof_enabled = true;
+	else
+		selected_ctx->eof_enabled = false;
+	selected_ctx_u->eof_enabled = false;
+
+	if ((reg & ISPCSI2_CTX_CTRL1_EOL_EN_MASK) ==
+						ISPCSI2_CTX_CTRL1_EOL_EN_ENABLE)
+		selected_ctx->eol_enabled = true;
+	else
+		selected_ctx->eol_enabled = false;
+	selected_ctx_u->eol_enabled = false;
+
+	if ((reg & ISPCSI2_CTX_CTRL1_CS_EN_MASK) ==
+						ISPCSI2_CTX_CTRL1_CS_EN_ENABLE)
+		selected_ctx->checksum_enabled = true;
+	else
+		selected_ctx->checksum_enabled = false;
+	selected_ctx_u->checksum_enabled = false;
+
+	if ((reg & ISPCSI2_CTX_CTRL1_CTX_EN_MASK) ==
+						ISPCSI2_CTX_CTRL1_CTX_EN_ENABLE)
+		selected_ctx->enabled = true;
+	else
+		selected_ctx->enabled = false;
+	selected_ctx_u->enabled = false;
+	update_ctx_ctrl1[ctxnum] = false;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTX_CTRL2(ctxnum));
+
+	selected_ctx->virtual_id = (reg & ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK) >>
+					ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT;
+	selected_ctx_u->virtual_id = false;
+
+	switch ((reg & ISPCSI2_CTX_CTRL2_FORMAT_MASK) >>
+				ISPCSI2_CTX_CTRL2_FORMAT_SHIFT) {
+	case 0x22:
+		selected_ctx->format.pixelformat = V4L2_PIX_FMT_RGB565;
+		break;
+	case 0x9E:
+	case 0x1E:
+		selected_ctx->format.pixelformat = V4L2_PIX_FMT_YUYV;
+		break;
+	case 0xA1:
+		selected_ctx->format.pixelformat = V4L2_PIX_FMT_RGB555;
+		break;
+	case 0xAB:
+	case 0x12F:
+		selected_ctx->format.pixelformat = V4L2_PIX_FMT_SGRBG10;
+		break;
+	}
+	selected_ctx_u->format = false;
+	update_ctx_ctrl2[ctxnum] = false;
+
+	selected_ctx->alpha = (isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_CTRL3(ctxnum)) &
+					ISPCSI2_CTX_CTRL3_ALPHA_MASK) >>
+					ISPCSI2_CTX_CTRL3_ALPHA_SHIFT;
+	selected_ctx_u->alpha = false;
+	update_ctx_ctrl3[ctxnum] = false;
+
+	selected_ctx->data_offset = (isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_DAT_OFST(ctxnum)) &
+					ISPCSI2_CTX_DAT_OFST_OFST_MASK) >>
+					ISPCSI2_CTX_DAT_OFST_OFST_SHIFT;
+	selected_ctx_u->data_offset = false;
+
+	selected_ctx->ping_addr = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_DAT_PING_ADDR(ctxnum));
+	selected_ctx_u->ping_addr = false;
+
+	selected_ctx->pong_addr = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+					ISPCSI2_CTX_DAT_PONG_ADDR(ctxnum));
+	selected_ctx_u->pong_addr = false;
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_update_all - Applies all CSI2 context configuration.
+ * @force_update: Flag to force rewrite of registers, even if they haven't been
+ *                updated with the isp_csi2_ctx_config_*() functions.
+ *
+ * It only saves settings when they were previously updated using the
+ * isp_csi2_ctx_config_*() functions, unless the force_update flag is
+ * set to true.
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_update_all(bool force_update)
+{
+	u8 ctxnum;
+
+	for (ctxnum = 0; ctxnum < 8; ctxnum++)
+		isp_csi2_ctx_update(ctxnum, force_update);
+
+	return 0;
+}
+
+/**
+ * isp_csi2_ctx_get_all - Gets all CSI2 Context configurations
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_ctx_get_all(void)
+{
+	u8 ctxnum;
+
+	for (ctxnum = 0; ctxnum < 8; ctxnum++)
+		isp_csi2_ctx_get(ctxnum);
+
+	return 0;
+}
+
+int isp_csi2_phy_config(struct isp_csi2_phy_cfg *desiredphyconfig)
+{
+	struct isp_csi2_phy_cfg *currphy = &current_csi2_cfg.phy;
+	struct isp_csi2_phy_cfg_update *currphy_u =
+						&current_csi2_cfg_update.phy;
+
+	if ((desiredphyconfig->tclk_term > 0x7f) ||
+				(desiredphyconfig->tclk_miss > 0x3)) {
+		printk(KERN_ERR "Invalid PHY configuration sent by the"
+								" driver\n");
+		return -EINVAL;
+	}
+
+	if (currphy->ths_term != desiredphyconfig->ths_term) {
+		currphy->ths_term = desiredphyconfig->ths_term;
+		currphy_u->ths_term = true;
+		update_phy_cfg0 = true;
+	}
+	if (currphy->ths_settle != desiredphyconfig->ths_settle) {
+		currphy->ths_settle = desiredphyconfig->ths_settle;
+		currphy_u->ths_settle = true;
+		update_phy_cfg0 = true;
+	}
+	if (currphy->tclk_term != desiredphyconfig->tclk_term) {
+		currphy->tclk_term = desiredphyconfig->tclk_term;
+		currphy_u->tclk_term = true;
+		update_phy_cfg1 = true;
+	}
+	if (currphy->tclk_miss != desiredphyconfig->tclk_miss) {
+		currphy->tclk_miss = desiredphyconfig->tclk_miss;
+		currphy_u->tclk_miss = true;
+		update_phy_cfg1 = true;
+	}
+	if (currphy->tclk_settle != desiredphyconfig->tclk_settle) {
+		currphy->tclk_settle = desiredphyconfig->tclk_settle;
+		currphy_u->tclk_settle = true;
+		update_phy_cfg1 = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_calc_phy_cfg0 - Calculates D-PHY config based on the MIPIClk speed.
+ * @mipiclk: MIPI clock frequency being used with CSI2 sensor.
+ * @lbound_hs_settle: Lower bound for CSI2 High Speed Settle transition.
+ * @ubound_hs_settle: Upper bound for CSI2 High Speed Settle transition.
+ *
+ * From TRM, we have the same calculation for HS Termination signal.
+ *  THS_TERM  = ceil( 12.5ns / DDRCLK period ) - 1
+ * But for Settle, we use the mid value between the two passed boundaries from
+ * sensor:
+ *  THS_SETTLE = (Upper bound + Lower bound) / 2
+ *
+ * Always returns 0.
+ */
+int isp_csi2_calc_phy_cfg0(u32 mipiclk, u32 lbound_hs_settle,
+							u32 ubound_hs_settle)
+{
+	struct isp_csi2_phy_cfg *currphy = &current_csi2_cfg.phy;
+	struct isp_csi2_phy_cfg_update *currphy_u =
+						&current_csi2_cfg_update.phy;
+	u32 tmp, ddrclk = mipiclk >> 1;
+
+	/* Calculate THS_TERM */
+	tmp = ddrclk / 80000000;
+	if ((ddrclk % 80000000) > 0)
+		tmp++;
+	currphy->ths_term = tmp - 1;
+	currphy_u->ths_term = true;
+
+	/* Calculate THS_SETTLE */
+	currphy->ths_settle = (ubound_hs_settle + lbound_hs_settle) / 2;
+
+	currphy_u->ths_settle = true;
+	isp_csi2_phy_update(true);
+	return 0;
+}
+EXPORT_SYMBOL(isp_csi2_calc_phy_cfg0);
+
+/**
+ * isp_csi2_phy_update - Applies CSI2 D-PHY configuration.
+ * @force_update: Flag to force rewrite of registers, even if they haven't been
+ *                updated with the isp_csi2_phy_config_*() functions.
+ *
+ * It only saves settings when they were previously updated using the
+ * isp_csi2_phy_config_*() functions, unless the force_update flag is
+ * set to true.
+ * Always returns 0.
+ **/
+int isp_csi2_phy_update(bool force_update)
+{
+	struct isp_csi2_phy_cfg *currphy = &current_csi2_cfg.phy;
+	struct isp_csi2_phy_cfg_update *currphy_u =
+						&current_csi2_cfg_update.phy;
+	u32 reg;
+
+	if (update_phy_cfg0 || force_update) {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG0);
+		if (currphy_u->ths_term || force_update) {
+			reg &= ~ISPCSI2PHY_CFG0_THS_TERM_MASK;
+			reg |= (currphy->ths_term <<
+					ISPCSI2PHY_CFG0_THS_TERM_SHIFT);
+			currphy_u->ths_term = false;
+		}
+		if (currphy_u->ths_settle || force_update) {
+			reg &= ~ISPCSI2PHY_CFG0_THS_SETTLE_MASK;
+			reg |= (currphy->ths_settle <<
+					ISPCSI2PHY_CFG0_THS_SETTLE_SHIFT);
+			currphy_u->ths_settle = false;
+		}
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG0);
+		update_phy_cfg0 = false;
+	}
+
+	if (update_phy_cfg1 || force_update) {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG1);
+		if (currphy_u->tclk_term || force_update) {
+			reg &= ~ISPCSI2PHY_CFG1_TCLK_TERM_MASK;
+			reg |= (currphy->tclk_term <<
+					ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT);
+			currphy_u->tclk_term = false;
+		}
+		if (currphy_u->tclk_miss || force_update) {
+			reg &= ~ISPCSI2PHY_CFG1_TCLK_MISS_MASK;
+			reg |= (currphy->tclk_miss <<
+					ISPCSI2PHY_CFG1_TCLK_MISS_SHIFT);
+			currphy_u->tclk_miss = false;
+		}
+		if (currphy_u->tclk_settle || force_update) {
+			reg &= ~ISPCSI2PHY_CFG1_TCLK_SETTLE_MASK;
+			reg |= (currphy->tclk_settle <<
+					ISPCSI2PHY_CFG1_TCLK_SETTLE_SHIFT);
+			currphy_u->tclk_settle = false;
+		}
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG1);
+		update_phy_cfg1 = false;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_phy_get - Gets CSI2 D-PHY configuration
+ *
+ * Gets settings from HW registers and fills in the internal driver memory
+ * Always returns 0.
+ **/
+int isp_csi2_phy_get(void)
+{
+	struct isp_csi2_phy_cfg *currphy = &current_csi2_cfg.phy;
+	struct isp_csi2_phy_cfg_update *currphy_u =
+						&current_csi2_cfg_update.phy;
+	u32 reg;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG0);
+	currphy->ths_term = (reg & ISPCSI2PHY_CFG0_THS_TERM_MASK) >>
+						ISPCSI2PHY_CFG0_THS_TERM_SHIFT;
+	currphy_u->ths_term = false;
+
+	currphy->ths_settle = (reg & ISPCSI2PHY_CFG0_THS_SETTLE_MASK) >>
+					ISPCSI2PHY_CFG0_THS_SETTLE_SHIFT;
+	currphy_u->ths_settle = false;
+	update_phy_cfg0 = false;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG1);
+
+	currphy->tclk_term = (reg & ISPCSI2PHY_CFG1_TCLK_TERM_MASK) >>
+						ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT;
+	currphy_u->tclk_term = false;
+
+	currphy->tclk_miss = (reg & ISPCSI2PHY_CFG1_TCLK_MISS_MASK) >>
+						ISPCSI2PHY_CFG1_TCLK_MISS_SHIFT;
+	currphy_u->tclk_miss = false;
+
+	currphy->tclk_settle = (reg & ISPCSI2PHY_CFG1_TCLK_SETTLE_MASK) >>
+					ISPCSI2PHY_CFG1_TCLK_SETTLE_SHIFT;
+	currphy_u->tclk_settle = false;
+
+	update_phy_cfg1 = false;
+	return 0;
+}
+
+/**
+ * isp_csi2_timings_config_forcerxmode - Sets Force Rx mode on stop state count
+ * @force_rx_mode: Boolean to enable/disable forcing Rx mode in CSI2 receiver
+ *
+ * Returns 0 if successful, or -EINVAL if wrong ComplexIO number is selected.
+ **/
+int isp_csi2_timings_config_forcerxmode(u8 io, bool force_rx_mode)
+{
+	struct isp_csi2_timings_cfg *currtimings;
+	struct isp_csi2_timings_cfg_update *currtimings_u;
+
+	if (io < 1 || io > 2) {
+		printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n");
+		return -EINVAL;
+	}
+
+	currtimings = &current_csi2_cfg.timings[io - 1];
+	currtimings_u = &current_csi2_cfg_update.timings[io - 1];
+	if (currtimings->force_rx_mode != force_rx_mode) {
+		currtimings->force_rx_mode = force_rx_mode;
+		currtimings_u->force_rx_mode = true;
+		update_timing = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_timings_config_stopstate_16x - Sets 16x factor for L3 cycles
+ * @stop_state_16x: Boolean to use or not use the 16x multiplier for stop count
+ *
+ * Returns 0 if successful, or -EINVAL if wrong ComplexIO number is selected.
+ **/
+int isp_csi2_timings_config_stopstate_16x(u8 io, bool stop_state_16x)
+{
+	struct isp_csi2_timings_cfg *currtimings;
+	struct isp_csi2_timings_cfg_update *currtimings_u;
+
+	if (io < 1 || io > 2) {
+		printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n");
+		return -EINVAL;
+	}
+
+	currtimings = &current_csi2_cfg.timings[io - 1];
+	currtimings_u = &current_csi2_cfg_update.timings[io - 1];
+	if (currtimings->stop_state_16x != stop_state_16x) {
+		currtimings->stop_state_16x = stop_state_16x;
+		currtimings_u->stop_state_16x = true;
+		update_timing = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_timings_config_stopstate_4x - Sets 4x factor for L3 cycles
+ * @stop_state_4x: Boolean to use or not use the 4x multiplier for stop count
+ *
+ * Returns 0 if successful, or -EINVAL if wrong ComplexIO number is selected.
+ **/
+int isp_csi2_timings_config_stopstate_4x(u8 io, bool stop_state_4x)
+{
+	struct isp_csi2_timings_cfg *currtimings;
+	struct isp_csi2_timings_cfg_update *currtimings_u;
+
+	if (io < 1 || io > 2) {
+		printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n");
+		return -EINVAL;
+	}
+
+	currtimings = &current_csi2_cfg.timings[io - 1];
+	currtimings_u = &current_csi2_cfg_update.timings[io - 1];
+	if (currtimings->stop_state_4x != stop_state_4x) {
+		currtimings->stop_state_4x = stop_state_4x;
+		currtimings_u->stop_state_4x = true;
+		update_timing = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_timings_config_stopstate_cnt - Sets L3 cycles
+ * @stop_state_counter: Stop state counter value for L3 cycles
+ *
+ * Returns 0 if successful, or -EINVAL if wrong ComplexIO number is selected.
+ **/
+int isp_csi2_timings_config_stopstate_cnt(u8 io, u16 stop_state_counter)
+{
+	struct isp_csi2_timings_cfg *currtimings;
+	struct isp_csi2_timings_cfg_update *currtimings_u;
+
+	if (io < 1 || io > 2) {
+		printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n");
+		return -EINVAL;
+	}
+
+	currtimings = &current_csi2_cfg.timings[io - 1];
+	currtimings_u = &current_csi2_cfg_update.timings[io - 1];
+	if (currtimings->stop_state_counter != stop_state_counter) {
+		currtimings->stop_state_counter = (stop_state_counter & 0x1FFF);
+		currtimings_u->stop_state_counter = true;
+		update_timing = true;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_timings_update - Applies specified CSI2 timing configuration.
+ * @io: IO number (1 or 2) which specifies which ComplexIO are we updating
+ * @force_update: Flag to force rewrite of registers, even if they haven't been
+ *                updated with the isp_csi2_timings_config_*() functions.
+ *
+ * It only saves settings when they were previously updated using the
+ * isp_csi2_timings_config_*() functions, unless the force_update flag is
+ * set to true.
+ * Returns 0 if successful, or -EINVAL if invalid IO number is passed.
+ **/
+int isp_csi2_timings_update(u8 io, bool force_update)
+{
+	struct isp_csi2_timings_cfg *currtimings;
+	struct isp_csi2_timings_cfg_update *currtimings_u;
+	u32 reg;
+
+	if (io < 1 || io > 2) {
+		printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n");
+		return -EINVAL;
+	}
+
+	currtimings = &current_csi2_cfg.timings[io - 1];
+	currtimings_u = &current_csi2_cfg_update.timings[io - 1];
+
+	if (update_timing || force_update) {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_TIMING);
+		if (currtimings_u->force_rx_mode || force_update) {
+			reg &= ~ISPCSI2_TIMING_FORCE_RX_MODE_IO_MASK(io);
+			if (currtimings->force_rx_mode)
+				reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO_ENABLE
+									(io);
+			else
+				reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO_DISABLE
+									(io);
+			currtimings_u->force_rx_mode = false;
+		}
+		if (currtimings_u->stop_state_16x || force_update) {
+			reg &= ~ISPCSI2_TIMING_STOP_STATE_X16_IO_MASK(io);
+			if (currtimings->stop_state_16x)
+				reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO_ENABLE
+									(io);
+			else
+				reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO_DISABLE
+									(io);
+			currtimings_u->stop_state_16x = false;
+		}
+		if (currtimings_u->stop_state_4x || force_update) {
+			reg &= ~ISPCSI2_TIMING_STOP_STATE_X4_IO_MASK(io);
+			if (currtimings->stop_state_4x) {
+				reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO_ENABLE
+									(io);
+			} else {
+				reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO_DISABLE
+									(io);
+			}
+			currtimings_u->stop_state_4x = false;
+		}
+		if (currtimings_u->stop_state_counter || force_update) {
+			reg &= ~ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(io);
+			reg |= currtimings->stop_state_counter <<
+				ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(io);
+			currtimings_u->stop_state_counter = false;
+		}
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_TIMING);
+		update_timing = false;
+	}
+	return 0;
+}
+
+/**
+ * isp_csi2_timings_get - Gets specific CSI2 ComplexIO timing configuration
+ * @io: IO number (1 or 2) which specifies which ComplexIO are we getting
+ *
+ * Gets settings from HW registers and fills in the internal driver memory
+ * Returns 0 if successful, or -EINVAL if invalid IO number is passed.
+ **/
+int isp_csi2_timings_get(u8 io)
+{
+	struct isp_csi2_timings_cfg *currtimings;
+	struct isp_csi2_timings_cfg_update *currtimings_u;
+	u32 reg;
+
+	if (io < 1 || io > 2) {
+		printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n");
+		return -EINVAL;
+	}
+
+	currtimings = &current_csi2_cfg.timings[io - 1];
+	currtimings_u = &current_csi2_cfg_update.timings[io - 1];
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_TIMING);
+	if ((reg & ISPCSI2_TIMING_FORCE_RX_MODE_IO_MASK(io)) ==
+				ISPCSI2_TIMING_FORCE_RX_MODE_IO_ENABLE(io))
+		currtimings->force_rx_mode = true;
+	else
+		currtimings->force_rx_mode = false;
+	currtimings_u->force_rx_mode = false;
+
+	if ((reg & ISPCSI2_TIMING_STOP_STATE_X16_IO_MASK(io)) ==
+				ISPCSI2_TIMING_STOP_STATE_X16_IO_ENABLE(io))
+		currtimings->stop_state_16x = true;
+	else
+		currtimings->stop_state_16x = false;
+	currtimings_u->stop_state_16x = false;
+
+	if ((reg & ISPCSI2_TIMING_STOP_STATE_X4_IO_MASK(io)) ==
+				ISPCSI2_TIMING_STOP_STATE_X4_IO_ENABLE(io))
+		currtimings->stop_state_4x = true;
+	else
+		currtimings->stop_state_4x = false;
+	currtimings_u->stop_state_4x = false;
+
+	currtimings->stop_state_counter = (reg &
+			ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(io)) >>
+			ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(io);
+	currtimings_u->stop_state_counter = false;
+	update_timing = false;
+	return 0;
+}
+
+/**
+ * isp_csi2_timings_update_all - Applies specified CSI2 timing configuration.
+ * @force_update: Flag to force rewrite of registers, even if they haven't been
+ *                updated with the isp_csi2_timings_config_*() functions.
+ *
+ * It only saves settings when they were previously updated using the
+ * isp_csi2_timings_config_*() functions, unless the force_update flag is
+ * set to true.
+ * Always returns 0.
+ **/
+int isp_csi2_timings_update_all(bool force_update)
+{
+	int i;
+
+	for (i = 1; i < 3; i++)
+		isp_csi2_timings_update(i, force_update);
+	return 0;
+}
+
+/**
+ * isp_csi2_timings_get_all - Gets all CSI2 ComplexIO timing configurations
+ *
+ * Always returns 0.
+ **/
+int isp_csi2_timings_get_all(void)
+{
+	int i;
+
+	for (i = 1; i < 3; i++)
+		isp_csi2_timings_get(i);
+	return 0;
+}
+
+/**
+ * isp_csi2_isr - CSI2 interrupt handling.
+ **/
+void isp_csi2_isr(void)
+{
+	u32 csi2_irqstatus, cpxio1_irqstatus, ctxirqstatus;
+
+	csi2_irqstatus = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_IRQSTATUS);
+	isp_reg_writel(csi2_irqstatus, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_IRQSTATUS);
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ) {
+		cpxio1_irqstatus = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_COMPLEXIO1_IRQSTATUS);
+		isp_reg_writel(cpxio1_irqstatus, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_COMPLEXIO1_IRQSTATUS);
+		printk(KERN_ERR "CSI2: ComplexIO Error IRQ %x\n",
+							cpxio1_irqstatus);
+	}
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_CONTEXT(0)) {
+		ctxirqstatus = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_IRQSTATUS(0));
+		isp_reg_writel(ctxirqstatus, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_IRQSTATUS(0));
+	}
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_OCP_ERR_IRQ)
+		printk(KERN_ERR "CSI2: OCP Transmission Error\n");
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ)
+		printk(KERN_ERR "CSI2: Short packet receive error\n");
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ)
+		printk(KERN_DEBUG "CSI2: ECC correction done\n");
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ)
+		printk(KERN_ERR "CSI2: ECC correction failed\n");
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ)
+		printk(KERN_ERR "CSI2: ComplexIO #2 failed\n");
+
+	if (csi2_irqstatus & ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)
+		printk(KERN_ERR "CSI2: FIFO overflow error\n");
+
+	return;
+}
+EXPORT_SYMBOL(isp_csi2_isr);
+
+/**
+ * isp_csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs.
+ * @enable: Enable/disable CSI2 ComplexIO #1 interrupts
+ **/
+void isp_csi2_irq_complexio1_set(int enable)
+{
+	u32 reg;
+	reg = ISPCSI2_COMPLEXIO1_IRQENABLE_STATEALLULPMEXIT |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_STATEALLULPMENTER |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM5 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL5 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC5 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS5 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS5 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM4 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL4 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC4 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS4 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS4 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM3 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL3 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC3 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS3 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS3 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM2 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL2 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC2 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS2 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS2 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM1 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL1 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC1 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS1 |
+				ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS1;
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_COMPLEXIO1_IRQSTATUS);
+	if (enable) {
+		reg |= isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_COMPLEXIO1_IRQENABLE);
+	} else
+		reg = 0;
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_COMPLEXIO1_IRQENABLE);
+}
+EXPORT_SYMBOL(isp_csi2_irq_complexio1_set);
+
+/**
+ * isp_csi2_irq_ctx_set - Enables CSI2 Context IRQs.
+ * @enable: Enable/disable CSI2 Context interrupts
+ **/
+void isp_csi2_irq_ctx_set(int enable)
+{
+	u32 reg;
+	int i;
+
+	reg = ISPCSI2_CTX_IRQSTATUS_FS_IRQ | ISPCSI2_CTX_IRQSTATUS_FE_IRQ;
+	for (i = 0; i < 8; i++) {
+		isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_IRQSTATUS(i));
+		if (enable) {
+			isp_reg_or(OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_IRQENABLE(i), reg);
+		} else {
+			isp_reg_writel(0, OMAP3_ISP_IOMEM_CSI2A,
+						ISPCSI2_CTX_IRQENABLE(i));
+		}
+	}
+
+}
+EXPORT_SYMBOL(isp_csi2_irq_ctx_set);
+
+/**
+ * isp_csi2_irq_status_set - Enables CSI2 Status IRQs.
+ * @enable: Enable/disable CSI2 Status interrupts
+ **/
+void isp_csi2_irq_status_set(int enable)
+{
+	u32 reg;
+	reg = ISPCSI2_IRQSTATUS_OCP_ERR_IRQ |
+				ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ |
+				ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ |
+				ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
+				ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
+				ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ |
+				ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ |
+				ISPCSI2_IRQSTATUS_CONTEXT(0);
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_IRQSTATUS);
+	if (enable)
+		reg |= isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_IRQENABLE);
+	else
+		reg = 0;
+
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_IRQENABLE);
+}
+EXPORT_SYMBOL(isp_csi2_irq_status_set);
+
+/**
+ * isp_csi2_irq_status_set - Enables main CSI2 IRQ.
+ * @enable: Enable/disable main CSI2 interrupt
+ **/
+void isp_csi2_irq_set(int enable)
+{
+	isp_reg_writel(IRQ0STATUS_CSIA_IRQ, OMAP3_ISP_IOMEM_MAIN,
+					ISP_IRQ0STATUS);
+	isp_reg_and_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE,
+					~IRQ0ENABLE_CSIA_IRQ,
+					(enable ? IRQ0ENABLE_CSIA_IRQ : 0));
+}
+EXPORT_SYMBOL(isp_csi2_irq_set);
+
+/**
+ * isp_csi2_irq_all_set - Enable/disable CSI2 interrupts.
+ * @enable: 0-Disable, 1-Enable.
+ **/
+void isp_csi2_irq_all_set(int enable)
+{
+	if (enable) {
+		isp_csi2_irq_complexio1_set(enable);
+		isp_csi2_irq_ctx_set(enable);
+		isp_csi2_irq_status_set(enable);
+		isp_csi2_irq_set(enable);
+	} else {
+		isp_csi2_irq_set(enable);
+		isp_csi2_irq_status_set(enable);
+		isp_csi2_irq_ctx_set(enable);
+		isp_csi2_irq_complexio1_set(enable);
+	}
+	return;
+}
+EXPORT_SYMBOL(isp_csi2_irq_all_set);
+
+/**
+ * isp_csi2_reset - Resets the CSI2 module.
+ *
+ * Returns 0 if successful, or -EBUSY if power command didn't respond.
+ **/
+int isp_csi2_reset(void)
+{
+	u32 reg;
+	u8 soft_reset_retries = 0;
+	int i;
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSCONFIG);
+	reg |= ISPCSI2_SYSCONFIG_SOFT_RESET_RESET;
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSCONFIG);
+
+	do {
+		reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSSTATUS) &
+				ISPCSI2_SYSSTATUS_RESET_DONE_MASK;
+		if (reg == ISPCSI2_SYSSTATUS_RESET_DONE_DONE)
+			break;
+		soft_reset_retries++;
+		if (soft_reset_retries < 5)
+			udelay(100);
+	} while (soft_reset_retries < 5);
+
+	if (soft_reset_retries == 5) {
+		printk(KERN_ERR "CSI2: Soft reset try count exceeded!\n");
+		return -EBUSY;
+	}
+
+	reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSCONFIG);
+	reg &= ~ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK;
+	reg |= ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO;
+	reg &= ~ISPCSI2_SYSCONFIG_AUTO_IDLE_MASK;
+	isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSCONFIG);
+
+	uses_videoport = false;
+	update_complexio_cfg1 = false;
+	update_phy_cfg0 = false;
+	update_phy_cfg1 = false;
+	for (i = 0; i < 8; i++) {
+		update_ctx_ctrl1[i] = false;
+		update_ctx_ctrl2[i] = false;
+		update_ctx_ctrl3[i] = false;
+	}
+	update_timing = false;
+	update_ctrl = false;
+
+	isp_csi2_complexio_lanes_get();
+	isp_csi2_ctrl_get();
+	isp_csi2_ctx_get_all();
+	isp_csi2_phy_get();
+	isp_csi2_timings_get_all();
+
+	isp_csi2_complexio_power_autoswitch(true);
+	isp_csi2_complexio_power(ISP_CSI2_POWER_ON);
+
+	isp_csi2_timings_config_forcerxmode(1, true);
+	isp_csi2_timings_config_stopstate_cnt(1, 0x1FF);
+	isp_csi2_timings_update_all(true);
+
+	return 0;
+}
+
+/**
+ * isp_csi2_enable - Enables the CSI2 module.
+ * @enable: Enables/disables the CSI2 module.
+ **/
+void isp_csi2_enable(int enable)
+{
+	if (enable) {
+		isp_csi2_ctx_config_enabled(0, true);
+		isp_csi2_ctx_config_eof_enabled(0, true);
+		isp_csi2_ctx_config_checksum_enabled(0, true);
+		isp_csi2_ctx_update(0, false);
+
+		isp_csi2_ctrl_config_ecc_enable(true);
+		isp_csi2_ctrl_config_if_enable(true);
+		isp_csi2_ctrl_update(false);
+	} else {
+		isp_csi2_ctx_config_enabled(0, false);
+		isp_csi2_ctx_config_eof_enabled(0, false);
+		isp_csi2_ctx_config_checksum_enabled(0, false);
+		isp_csi2_ctx_update(0, false);
+
+		isp_csi2_ctrl_config_ecc_enable(false);
+		isp_csi2_ctrl_config_if_enable(false);
+		isp_csi2_ctrl_update(false);
+	}
+}
+EXPORT_SYMBOL(isp_csi2_enable);
+
+/**
+ * isp_csi2_regdump - Prints CSI2 debug information.
+ **/
+void isp_csi2_regdump(void)
+{
+	printk(KERN_DEBUG "-------------Register dump-------------\n");
+
+	printk(KERN_DEBUG "ISP_CTRL: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL));
+	printk(KERN_DEBUG "ISP_TCTRL_CTRL: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL));
+
+	printk(KERN_DEBUG "ISPCCDC_SDR_ADDR: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR));
+	printk(KERN_DEBUG "ISPCCDC_SYN_MODE: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE));
+	printk(KERN_DEBUG "ISPCCDC_CFG: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG));
+	printk(KERN_DEBUG "ISPCCDC_FMTCFG: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG));
+	printk(KERN_DEBUG "ISPCCDC_HSIZE_OFF: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HSIZE_OFF));
+	printk(KERN_DEBUG "ISPCCDC_HORZ_INFO: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HORZ_INFO));
+	printk(KERN_DEBUG "ISPCCDC_VERT_START: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CCDC,
+				ISPCCDC_VERT_START));
+	printk(KERN_DEBUG "ISPCCDC_VERT_LINES: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CCDC,
+				ISPCCDC_VERT_LINES));
+
+	printk(KERN_DEBUG "ISPCSI2_COMPLEXIO_CFG1: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_COMPLEXIO_CFG1));
+	printk(KERN_DEBUG "ISPCSI2_SYSSTATUS: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_SYSSTATUS));
+	printk(KERN_DEBUG "ISPCSI2_SYSCONFIG: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_SYSCONFIG));
+	printk(KERN_DEBUG "ISPCSI2_IRQENABLE: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_IRQENABLE));
+	printk(KERN_DEBUG "ISPCSI2_IRQSTATUS: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_IRQSTATUS));
+
+	printk(KERN_DEBUG "ISPCSI2_CTX_IRQENABLE(0): %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_CTX_IRQENABLE(0)));
+	printk(KERN_DEBUG "ISPCSI2_CTX_IRQSTATUS(0): %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_CTX_IRQSTATUS(0)));
+	printk(KERN_DEBUG "ISPCSI2_TIMING: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_TIMING));
+	printk(KERN_DEBUG "ISPCSI2PHY_CFG0: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY,
+				ISPCSI2PHY_CFG0));
+	printk(KERN_DEBUG "ISPCSI2PHY_CFG1: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY,
+				ISPCSI2PHY_CFG1));
+	printk(KERN_DEBUG "ISPCSI2_CTX_CTRL1(0): %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_CTX_CTRL1(0)));
+	printk(KERN_DEBUG "ISPCSI2_CTX_CTRL2(0): %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_CTX_CTRL2(0)));
+	printk(KERN_DEBUG "ISPCSI2_CTX_CTRL3(0): %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_CTX_CTRL3(0)));
+	printk(KERN_DEBUG "ISPCSI2_CTX_DAT_OFST(0): %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_CTX_DAT_OFST(0)));
+	printk(KERN_DEBUG "ISPCSI2_CTX_DAT_PING_ADDR(0): %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_CTX_DAT_PING_ADDR(0)));
+	printk(KERN_DEBUG "ISPCSI2_CTX_DAT_PONG_ADDR(0): %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A,
+				ISPCSI2_CTX_DAT_PONG_ADDR(0)));
+	printk(KERN_DEBUG "ISPCSI2_CTRL: %x\n",
+			isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTRL));
+	printk(KERN_DEBUG "---------------------------------------\n");
+}
+
+/**
+ * isp_csi2_cleanup - Routine for module driver cleanup
+ **/
+void isp_csi2_cleanup(void)
+{
+	return;
+}
+
+/**
+ * isp_csi2_init - Routine for module driver init
+ **/
+int __init isp_csi2_init(void)
+{
+	int i;
+
+	update_complexio_cfg1 = false;
+	update_phy_cfg0 = false;
+	update_phy_cfg1 = false;
+	for (i = 0; i < 8; i++) {
+		update_ctx_ctrl1[i] = false;
+		update_ctx_ctrl2[i] = false;
+		update_ctx_ctrl3[i] = false;
+	}
+	update_timing = false;
+	update_ctrl = false;
+
+	memset(&current_csi2_cfg, 0, sizeof(current_csi2_cfg));
+	memset(&current_csi2_cfg_update, 0, sizeof(current_csi2_cfg_update));
+	return 0;
+}
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("ISP CSI2 Receiver Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/isp/ispcsi2.h b/drivers/media/video/isp/ispcsi2.h
new file mode 100644
index 0000000..56e3d25
--- /dev/null
+++ b/drivers/media/video/isp/ispcsi2.h
@@ -0,0 +1,232 @@ 
+/*
+ * ispcsi2.h
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * Contributors:
+ * 	Sergio Aguirre <saaguirre@ti.com>
+ * 	Dominic Curran <dcurran@ti.com>
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef OMAP_ISP_CSI2_API_H
+#define OMAP_ISP_CSI2_API_H
+#include <linux/videodev2.h>
+
+enum isp_csi2_irqevents {
+	OCP_ERR_IRQ = 0x4000,
+	SHORT_PACKET_IRQ = 0x2000,
+	ECC_CORRECTION_IRQ = 0x1000,
+	ECC_NO_CORRECTION_IRQ = 0x800,
+	COMPLEXIO2_ERR_IRQ = 0x400,
+	COMPLEXIO1_ERR_IRQ = 0x200,
+	FIFO_OVF_IRQ = 0x100,
+	CONTEXT7 = 0x80,
+	CONTEXT6 = 0x40,
+	CONTEXT5 = 0x20,
+	CONTEXT4 = 0x10,
+	CONTEXT3 = 0x8,
+	CONTEXT2 = 0x4,
+	CONTEXT1 = 0x2,
+	CONTEXT0 = 0x1,
+};
+
+enum isp_csi2_ctx_irqevents {
+	CTX_ECC_CORRECTION = 0x100,
+	CTX_LINE_NUMBER = 0x80,
+	CTX_FRAME_NUMBER = 0x40,
+	CTX_CS = 0x20,
+	CTX_LE = 0x8,
+	CTX_LS = 0x4,
+	CTX_FE = 0x2,
+	CTX_FS = 0x1,
+};
+
+enum isp_csi2_power_cmds {
+	ISP_CSI2_POWER_OFF,
+	ISP_CSI2_POWER_ON,
+	ISP_CSI2_POWER_ULPW,
+};
+
+enum isp_csi2_frame_mode {
+	ISP_CSI2_FRAME_IMMEDIATE,
+	ISP_CSI2_FRAME_AFTERFEC,
+};
+
+struct csi2_lanecfg {
+	u8 pos;
+	u8 pol;
+};
+
+struct isp_csi2_lanes_cfg {
+	struct csi2_lanecfg data[4];
+	struct csi2_lanecfg clk;
+};
+
+struct isp_csi2_lanes_cfg_update {
+	bool data[4];
+	bool clk;
+};
+
+struct isp_csi2_phy_cfg {
+	u8 ths_term;
+	u8 ths_settle;
+	u8 tclk_term;
+	unsigned tclk_miss:1;
+	u8 tclk_settle;
+};
+
+struct isp_csi2_phy_cfg_update {
+	bool ths_term;
+	bool ths_settle;
+	bool tclk_term;
+	bool tclk_miss;
+	bool tclk_settle;
+};
+
+struct isp_csi2_ctx_cfg {
+	u8 virtual_id;
+	u8 frame_count;
+	struct v4l2_pix_format format;
+	u16 alpha;
+	u16 data_offset;
+	u32 ping_addr;
+	u32 pong_addr;
+	bool eof_enabled;
+	bool eol_enabled;
+	bool checksum_enabled;
+	bool enabled;
+};
+
+struct isp_csi2_ctx_cfg_update {
+	bool virtual_id;
+	bool frame_count;
+	bool format;
+	bool alpha;
+	bool data_offset;
+	bool ping_addr;
+	bool pong_addr;
+	bool eof_enabled;
+	bool eol_enabled;
+	bool checksum_enabled;
+	bool enabled;
+};
+
+struct isp_csi2_timings_cfg {
+	bool force_rx_mode;
+	bool stop_state_16x;
+	bool stop_state_4x;
+	u16 stop_state_counter;
+};
+
+struct isp_csi2_timings_cfg_update {
+	bool force_rx_mode;
+	bool stop_state_16x;
+	bool stop_state_4x;
+	bool stop_state_counter;
+};
+
+struct isp_csi2_ctrl_cfg {
+	bool vp_clk_enable;
+	bool vp_only_enable;
+	u8 vp_out_ctrl;
+	bool debug_enable;
+	u8 burst_size;
+	enum isp_csi2_frame_mode frame_mode;
+	bool ecc_enable;
+	bool secure_mode;
+	bool if_enable;
+};
+
+struct isp_csi2_ctrl_cfg_update {
+	bool vp_clk_enable;
+	bool vp_only_enable;
+	bool vp_out_ctrl;
+	bool debug_enable;
+	bool burst_size;
+	bool frame_mode;
+	bool ecc_enable;
+	bool secure_mode;
+	bool if_enable;
+};
+
+struct isp_csi2_cfg {
+	struct isp_csi2_lanes_cfg lanes;
+	struct isp_csi2_phy_cfg phy;
+	struct isp_csi2_ctx_cfg contexts[8];
+	struct isp_csi2_timings_cfg timings[2];
+	struct isp_csi2_ctrl_cfg ctrl;
+};
+
+struct isp_csi2_cfg_update {
+	struct isp_csi2_lanes_cfg_update lanes;
+	struct isp_csi2_phy_cfg_update phy;
+	struct isp_csi2_ctx_cfg_update contexts[8];
+	struct isp_csi2_timings_cfg_update timings[2];
+	struct isp_csi2_ctrl_cfg_update ctrl;
+};
+
+int isp_csi2_complexio_lanes_config(struct isp_csi2_lanes_cfg *reqcfg);
+int isp_csi2_complexio_lanes_update(bool force_update);
+int isp_csi2_complexio_lanes_get(void);
+int isp_csi2_complexio_power_autoswitch(bool enable);
+int isp_csi2_complexio_power(enum isp_csi2_power_cmds power_cmd);
+int isp_csi2_ctrl_config_frame_mode(enum isp_csi2_frame_mode frame_mode);
+int isp_csi2_ctrl_config_vp_clk_enable(bool vp_clk_enable);
+int isp_csi2_ctrl_config_vp_only_enable(bool vp_only_enable);
+int isp_csi2_ctrl_config_debug_enable(bool debug_enable);
+int isp_csi2_ctrl_config_burst_size(u8 burst_size);
+int isp_csi2_ctrl_config_ecc_enable(bool ecc_enable);
+int isp_csi2_ctrl_config_secure_mode(bool secure_mode);
+int isp_csi2_ctrl_config_if_enable(bool if_enable);
+int isp_csi2_ctrl_config_vp_out_ctrl(u8 vp_out_ctrl);
+int isp_csi2_ctrl_update(bool force_update);
+int isp_csi2_ctrl_get(void);
+int isp_csi2_ctx_config_virtual_id(u8 ctxnum, u8 virtual_id);
+int isp_csi2_ctx_config_frame_count(u8 ctxnum, u8 frame_count);
+int isp_csi2_ctx_config_format(u8 ctxnum, u32 pixformat);
+int isp_csi2_ctx_config_alpha(u8 ctxnum, u16 alpha);
+int isp_csi2_ctx_config_data_offset(u8 ctxnum, u16 data_offset);
+int isp_csi2_ctx_config_ping_addr(u8 ctxnum, u32 ping_addr);
+int isp_csi2_ctx_config_pong_addr(u8 ctxnum, u32 pong_addr);
+int isp_csi2_ctx_config_eof_enabled(u8 ctxnum, bool eof_enabled);
+int isp_csi2_ctx_config_eol_enabled(u8 ctxnum, bool eol_enabled);
+int isp_csi2_ctx_config_checksum_enabled(u8 ctxnum, bool checksum_enabled);
+int isp_csi2_ctx_config_enabled(u8 ctxnum, bool enabled);
+int isp_csi2_ctx_update(u8 ctxnum, bool force_update);
+int isp_csi2_ctx_get(u8 ctxnum);
+int isp_csi2_ctx_update_all(bool force_update);
+int isp_csi2_ctx_get_all(void);
+int isp_csi2_phy_config(struct isp_csi2_phy_cfg *desiredphyconfig);
+int isp_csi2_calc_phy_cfg0(u32 mipiclk, u32 lbound_hs_settle,
+							u32 ubound_hs_settle);
+int isp_csi2_phy_update(bool force_update);
+int isp_csi2_phy_get(void);
+int isp_csi2_timings_config_forcerxmode(u8 io, bool force_rx_mode);
+int isp_csi2_timings_config_stopstate_16x(u8 io, bool stop_state_16x);
+int isp_csi2_timings_config_stopstate_4x(u8 io, bool stop_state_4x);
+int isp_csi2_timings_config_stopstate_cnt(u8 io, u16 stop_state_counter);
+int isp_csi2_timings_update(u8 io, bool force_update);
+int isp_csi2_timings_get(u8 io);
+int isp_csi2_timings_update_all(bool force_update);
+int isp_csi2_timings_get_all(void);
+void isp_csi2_irq_complexio1_set(int enable);
+void isp_csi2_irq_ctx_set(int enable);
+void isp_csi2_irq_status_set(int enable);
+void isp_csi2_irq_set(int enable);
+void isp_csi2_irq_all_set(int enable);
+
+void isp_csi2_isr(void);
+int isp_csi2_reset(void);
+void isp_csi2_enable(int enable);
+void isp_csi2_regdump(void);
+
+#endif	/* OMAP_ISP_CSI2_H */
+