diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 5020cb1..40cb65b 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -211,25 +211,52 @@ void omap2_init_clksel_parent(struct clk *clk)
 	return;
 }
 
-/* Returns the DPLL rate */
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values.  When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk.  Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
 u32 omap2_get_dpll_rate(struct clk *clk)
 {
 	long long dpll_clk;
-	u32 dpll_mult, dpll_div, dpll;
+	u32 dpll_mult, dpll_div, v;
 	struct dpll_data *dd;
 
 	dd = clk->dpll_data;
-	/* REVISIT: What do we return on error? */
 	if (!dd)
 		return 0;
 
-	dpll = __raw_readl(dd->mult_div1_reg);
-	dpll_mult = dpll & dd->mult_mask;
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			return dd->clk_bypass->rate;
+	}
+
+	v = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = v & dd->mult_mask;
 	dpll_mult >>= __ffs(dd->mult_mask);
-	dpll_div = dpll & dd->div1_mask;
+	dpll_div = v & dd->div1_mask;
 	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_clk = (long long)clk->parent->rate * dpll_mult;
+	dpll_clk = (long long)dd->clk_ref->rate * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
 
 	return dpll_clk;
@@ -930,7 +957,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 	pr_debug("clock: starting DPLL round_rate for clock %s, target rate "
 		 "%ld\n", clk->name, target_rate);
 
-	scaled_rt_rp = target_rate / (clk->parent->rate / DPLL_SCALE_FACTOR);
+	scaled_rt_rp = target_rate / (dd->clk_ref->rate / DPLL_SCALE_FACTOR);
 	scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
 
 	dd->last_rounded_rate = 0;
@@ -957,7 +984,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 			break;
 
 		r = _dpll_test_mult(&m, n, &new_rate, target_rate,
-				    clk->parent->rate);
+				    dd->clk_ref->rate);
 
 		/* m can't be set low enough for this n - try with a larger n */
 		if (r == DPLL_MULT_UNDERFLOW)
@@ -988,7 +1015,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
 
 	dd->last_rounded_m = min_e_m;
 	dd->last_rounded_n = min_e_n;
-	dd->last_rounded_rate = _dpll_compute_new_rate(clk->parent->rate,
+	dd->last_rounded_rate = _dpll_compute_new_rate(dd->clk_ref->rate,
 						       min_e_m,  min_e_n);
 
 	pr_debug("clock: final least error: e = %d, m = %d, n = %d\n",
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ca6bf22..2679ddf 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -21,6 +21,21 @@
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
 
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
+#define CORE_CLK_SRC_32K		0x0
+#define CORE_CLK_SRC_DPLL		0x1
+#define CORE_CLK_SRC_DPLL_X2		0x2
+
+/* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP2XXX_EN_DPLL_LPBYPASS		0x1
+#define OMAP2XXX_EN_DPLL_FRBYPASS		0x2
+#define OMAP2XXX_EN_DPLL_LOCKED			0x3
+
+/* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP3XXX_EN_DPLL_LPBYPASS		0x5
+#define OMAP3XXX_EN_DPLL_FRBYPASS		0x6
+#define OMAP3XXX_EN_DPLL_LOCKED			0x7
+
 int omap2_clk_init(void);
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index f2b74e9..1e839c5 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -236,19 +236,32 @@ static struct clk *sclk;
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
 
-/* This actually returns the rate of core_ck, not dpll_ck. */
-static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual).  This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
 {
-	long long dpll_clk;
-	u8 amult;
+	long long core_clk;
+	u32 v;
 
-	dpll_clk = omap2_get_dpll_rate(tclk);
+	core_clk = omap2_get_dpll_rate(clk);
 
-	amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	amult &= OMAP24XX_CORE_CLK_SRC_MASK;
-	dpll_clk *= amult;
+	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (v == CORE_CLK_SRC_32K)
+		core_clk = 32768;
+	else
+		core_clk *= v;
 
-	return dpll_clk;
+	return core_clk;
 }
 
 static int omap2_enable_osc_ck(struct clk *clk)
@@ -371,7 +384,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
 
 static unsigned long omap2_dpllcore_recalc(struct clk *clk)
 {
-	return omap2_get_dpll_rate_24xx(clk);
+	return omap2xxx_clk_get_core_rate(clk);
 }
 
 static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
@@ -381,7 +394,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	struct prcm_config tmpset;
 	const struct dpll_data *dd;
 
-	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
 	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
 
@@ -516,7 +529,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 	}
 
 	curr_prcm_set = prcm;
-	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
 
 	if (prcm->dpll_speed == cur_rate / 2) {
 		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
@@ -728,7 +741,7 @@ int __init omap2_clk_init(void)
 		}
 
 	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 11da621..33c3e5b 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -663,6 +663,10 @@ static struct dpll_data dpll_dd = {
 	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
 	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+	.clk_bypass		= &sys_ck,
+	.clk_ref		= &sys_ck,
+	.control_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask		= OMAP24XX_EN_DPLL_MASK,
 	.max_multiplier		= 1024,
 	.min_divider		= 1,
 	.max_divider		= 16,
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index fb0f53b..0a14dca 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -93,7 +93,6 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
 	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
 	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
-	CLK(NULL,	"virt_omap_54m_fck", &virt_omap_54m_fck, CK_343X),
 	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
 	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
 	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
@@ -110,7 +109,6 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
 	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
 	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
-	CLK(NULL,	"omap_120m_fck", &omap_120m_fck, CK_3430ES2),
 	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
 	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
 	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
@@ -344,7 +342,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
 	unsigned long fint;
 	u16 f = 0;
 
-	fint = clk->parent->rate / (n + 1);
+	fint = clk->dpll_data->clk_ref->rate / (n + 1);
 
 	pr_debug("clock: fint is %lu\n", fint);
 
@@ -411,7 +409,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 }
 
 /*
- * omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
  * @clk: pointer to a DPLL struct clk
  *
  * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
@@ -501,14 +499,25 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 static int omap3_noncore_dpll_enable(struct clk *clk)
 {
 	int r;
+	struct dpll_data *dd;
 
 	if (clk == &dpll3_ck)
 		return -EINVAL;
 
-	if (clk->parent->rate == omap2_get_dpll_rate(clk))
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->rate == dd->clk_bypass->rate) {
+		WARN_ON(clk->parent != dd->clk_bypass);
 		r = _omap3_noncore_dpll_bypass(clk);
-	else
+	} else {
+		WARN_ON(clk->parent != dd->clk_ref);
 		r = _omap3_noncore_dpll_lock(clk);
+	}
+	/* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
+	if (!r)
+		clk->rate = omap2_get_dpll_rate(clk);
 
 	return r;
 }
@@ -583,13 +592,18 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
  * @clk: struct clk * of DPLL to set
  * @rate: rounded target rate
  *
- * Program the DPLL with the rounded target rate.  Returns -EINVAL upon
- * error, or 0 upon success.
+ * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass.  Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
  */
 static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 {
+	struct clk *new_parent = NULL;
 	u16 freqsel;
 	struct dpll_data *dd;
+	int ret;
 
 	if (!clk || !rate)
 		return -EINVAL;
@@ -601,18 +615,56 @@ static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	if (rate == omap2_get_dpll_rate(clk))
 		return 0;
 
-	if (dd->last_rounded_rate != rate)
-		omap2_dpll_round_rate(clk, rate);
+	/*
+	 * Ensure both the bypass and ref clocks are enabled prior to
+	 * doing anything; we need the bypass clock running to reprogram
+	 * the DPLL.
+	 */
+	omap2_clk_enable(dd->clk_bypass);
+	omap2_clk_enable(dd->clk_ref);
+
+	if (dd->clk_bypass->rate == rate &&
+	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
 
-	if (dd->last_rounded_rate == 0)
-		return -EINVAL;
+		ret = _omap3_noncore_dpll_bypass(clk);
+		if (!ret)
+			new_parent = dd->clk_bypass;
+	} else {
+		if (dd->last_rounded_rate != rate)
+			omap2_dpll_round_rate(clk, rate);
+
+		if (dd->last_rounded_rate == 0)
+			return -EINVAL;
+
+		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+		if (!freqsel)
+			WARN_ON(1);
 
-	freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
-	if (!freqsel)
-		WARN_ON(1);
+		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+			 clk->name, rate);
 
-	omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n,
-				   freqsel);
+		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+						 dd->last_rounded_n, freqsel);
+		if (!ret)
+			new_parent = dd->clk_ref;
+	}
+	if (!ret) {
+		/*
+		 * Switch the parent clock in the heirarchy, and make sure
+		 * that the new parent's usecount is correct.  Note: we
+		 * enable the new parent before disabling the old to avoid
+		 * any unnecessary hardware disable->enable transitions.
+		 */
+		if (clk->usecount) {
+			omap2_clk_enable(new_parent);
+			omap2_clk_disable(clk->parent);
+		}
+		clk_reparent(clk, new_parent);
+		clk->rate = rate;
+	}
+	omap2_clk_disable(dd->clk_ref);
+	omap2_clk_disable(dd->clk_bypass);
 
 	return 0;
 }
@@ -804,11 +856,11 @@ static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 
 	dd = pclk->dpll_data;
 
-	WARN_ON(!dd->control_reg || !dd->enable_mask);
+	WARN_ON(!dd->enable_mask);
 
 	v = __raw_readl(dd->control_reg) & dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
-	if (v != DPLL_LOCKED)
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
 		rate = clk->parent->rate;
 	else
 		rate = clk->parent->rate * 2;
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 764c7cd..70ec10d 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -48,6 +48,10 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
  * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
  */
 
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
 /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
 #define DPLL_LOW_POWER_STOP		0x1
 #define DPLL_LOW_POWER_BYPASS		0x5
@@ -217,16 +221,6 @@ static struct clk sys_clkout1 = {
 
 /* CM CLOCKS */
 
-static const struct clksel_rate dpll_bypass_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate dpll_locked_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
 static const struct clksel_rate div16_dpll_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
 	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
@@ -254,6 +248,8 @@ static struct dpll_data dpll1_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll1_fck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
@@ -324,6 +320,8 @@ static struct dpll_data dpll2_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
 	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll2_fck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
 	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
@@ -384,6 +382,8 @@ static struct dpll_data dpll3_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
 	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
@@ -477,37 +477,19 @@ static struct clk dpll3_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static const struct clksel core_ck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk core_ck = {
 	.name		= "core_ck",
 	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= core_ck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel dpll3_m2x2_ck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
+	.parent		= &dpll3_m2_ck,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk dpll3_m2x2_ck = {
 	.name		= "dpll3_m2x2_ck",
 	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= dpll3_m2x2_ck_clksel,
+	.parent		= &dpll3_x2_ck,
 	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* The PWRDN bit is apparently only available on 3430ES2 and above */
@@ -541,22 +523,12 @@ static struct clk dpll3_m3x2_ck = {
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel emu_core_alwon_ck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk emu_core_alwon_ck = {
 	.name		= "emu_core_alwon_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll3_m3x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.clksel		= emu_core_alwon_ck_clksel,
 	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* DPLL4 */
@@ -566,6 +538,8 @@ static struct dpll_data dpll4_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
 	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
@@ -637,12 +611,6 @@ static struct clk dpll4_m2x2_ck = {
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel omap_96m_alwon_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 /*
  * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
  * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
@@ -653,11 +621,7 @@ static struct clk omap_96m_alwon_fck = {
 	.name		= "omap_96m_alwon_fck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_m2x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= omap_96m_alwon_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk cm_96m_fck = {
@@ -720,23 +684,6 @@ static struct clk dpll4_m3x2_ck = {
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel virt_omap_54m_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
-static struct clk virt_omap_54m_fck = {
-	.name		= "virt_omap_54m_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m3x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= virt_omap_54m_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
 static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
 	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
 	{ .div = 0 }
@@ -748,7 +695,7 @@ static const struct clksel_rate omap_54m_alt_rates[] = {
 };
 
 static const struct clksel omap_54m_clksel[] = {
-	{ .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
 	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
 	{ .parent = NULL }
 };
@@ -891,6 +838,8 @@ static struct dpll_data dpll5_dd = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
 	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
 	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
 	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
 	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
 	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
@@ -936,23 +885,6 @@ static struct clk dpll5_m2_ck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static const struct clksel omap_120m_fck_clksel[] = {
-	{ .parent = &sys_ck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_120m_fck = {
-	.name		= "omap_120m_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll5_m2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.clksel_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
-	.clksel		= omap_120m_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
 /* CM EXTERNAL CLOCK OUTPUTS */
 
 static const struct clksel_rate clkout2_src_core_rates[] = {
@@ -1058,28 +990,12 @@ static struct clk dpll1_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/*
- * MPU clksel:
- * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll1_fck'
- */
-static const struct clksel mpu_clksel[] = {
-	{ .parent = &dpll1_fck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk mpu_ck = {
 	.name		= "mpu_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll1_x2m2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.clksel		= mpu_clksel,
 	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
@@ -1129,19 +1045,6 @@ static struct clk dpll2_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-/*
- * IVA2 clksel:
- * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
- * derives from the high-frequency bypass clock originating from DPLL3,
- * called 'dpll2_fck'
- */
-
-static const struct clksel iva2_clksel[] = {
-	{ .parent = &dpll2_fck,	  .rates = dpll_bypass_rates },
-	{ .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk iva2_ck = {
 	.name		= "iva2_ck",
 	.ops		= &clkops_omap2_dflt_wait,
@@ -1149,12 +1052,8 @@ static struct clk iva2_ck = {
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
-					  OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
-	.clksel		= iva2_clksel,
 	.clkdm_name	= "iva2_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 /* Common interface clocks */
@@ -1384,7 +1283,7 @@ static struct clk ts_fck = {
 static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
 	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_120m_fck,
+	.parent		= &dpll5_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -2094,24 +1993,14 @@ static struct clk des1_ick = {
 };
 
 /* DSS */
-static const struct clksel dss1_alwon_fck_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk dss1_alwon_fck = {
 	.name		= "dss1_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll4_m4x2_ck,
-	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= dss1_alwon_fck_clksel,
 	.clkdm_name	= "dss_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk dss_tv_fck = {
@@ -2161,24 +2050,14 @@ static struct clk dss_ick = {
 
 /* CAM */
 
-static const struct clksel cam_mclk_clksel[] = {
-	{ .parent = &sys_ck,	    .rates = dpll_bypass_rates },
-	{ .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
-	{ .parent = NULL }
-};
-
 static struct clk cam_mclk = {
 	.name		= "cam_mclk",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll4_m5x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.clksel_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.clksel		= cam_mclk_clksel,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
 	.clkdm_name	= "cam_clkdm",
-	.recalc		= &omap2_clksel_recalc,
+	.recalc		= &followparent_recalc,
 };
 
 static struct clk cam_ick = {
@@ -2209,7 +2088,7 @@ static struct clk csi2_96m_fck = {
 static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &omap_120m_fck,
+	.parent		= &dpll5_m2_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
@@ -2260,7 +2139,7 @@ static const struct clksel_rate usim_120m_rates[] = {
 
 static const struct clksel usim_clksel[] = {
 	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
-	{ .parent = &omap_120m_fck,	.rates = usim_120m_rates },
+	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
 	{ .parent = &sys_ck,		.rates = div2_rates },
 	{ .parent = NULL },
 };
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 3a47aba..0afdad5 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -29,7 +29,7 @@
 #include <mach/sram.h>
 
 #include "prm.h"
-
+#include "clock.h"
 #include <mach/sdrc.h>
 #include "sdrc.h"
 
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index 7b6f6bc..073a2c5 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -39,6 +39,10 @@ struct dpll_data {
 	void __iomem		*mult_div1_reg;
 	u32			mult_mask;
 	u32			div1_mask;
+	struct clk		*clk_bypass;
+	struct clk		*clk_ref;
+	void __iomem		*control_reg;
+	u32			enable_mask;
 	unsigned int		rate_tolerance;
 	unsigned long		last_rounded_rate;
 	u16			last_rounded_m;
@@ -49,10 +53,8 @@ struct dpll_data {
 	u16			max_multiplier;
 #  if defined(CONFIG_ARCH_OMAP3)
 	u8			modes;
-	void __iomem		*control_reg;
 	void __iomem		*autoidle_reg;
 	void __iomem		*idlest_reg;
-	u32			enable_mask;
 	u32			autoidle_mask;
 	u32			freqsel_mask;
 	u32			idlest_mask;
@@ -154,9 +156,4 @@ extern const struct clkops clkops_null;
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
 
-/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
-#define CORE_CLK_SRC_32K		0
-#define CORE_CLK_SRC_DPLL		1
-#define CORE_CLK_SRC_DPLL_X2		2
-
 #endif
