diff mbox

TWL4030: Make sure the regulator is active after calling twl4030reg_enable

Message ID 1240409015-2940-2-git-send-email-peter.de-schrijver@nokia.com (mailing list archive)
State Awaiting Upstream, archived
Headers show

Commit Message

Peter 'p2' De Schrijver April 22, 2009, 2:03 p.m. UTC 
This patch makes sure a regulator is active when enabled. After a warm reboot, only adding
a regulator to a power group is not enough to activate it.

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
---
 drivers/regulator/twl4030-regulator.c |   11 +++++++++--
 1 files changed, 9 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/regulator/twl4030-regulator.c b/drivers/regulator/twl4030-regulator.c
index df9a94b..80a4e10 100644
--- a/drivers/regulator/twl4030-regulator.c
+++ b/drivers/regulator/twl4030-regulator.c
@@ -177,14 +177,21 @@  static int twl4030reg_is_enabled(struct regulator_dev *rdev)
 static int twl4030reg_enable(struct regulator_dev *rdev)
 {
 	struct twlreg_info	*info = rdev_get_drvdata(rdev);
-	int			grp;
+	int			grp, status;
+	unsigned 		message;
 
 	grp = twl4030reg_read(info, VREG_GRP);
 	if (grp < 0)
 		return grp;
 
 	grp |= P1_GRP;
-	return twl4030reg_write(info, VREG_GRP, grp);
+	status =  twl4030reg_write(info, VREG_GRP, grp);
+	if (status < 0)
+		return status;
+
+	message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE);
+
+	return twl4030_send_pb_msg(message);
 }
 
 static int twl4030reg_disable(struct regulator_dev *rdev)