@@ -38,6 +38,7 @@
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
+#include <asm/localtimer.h>
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
@@ -229,6 +230,9 @@ static void __init omap2_gp_clocksource_init(void)
static void __init omap2_gp_timer_init(void)
{
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+#endif
omap_dm_timer_init();
omap2_gp_clockevent_init();
new file mode 100644
@@ -0,0 +1,34 @@
+/*
+ * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
+ * own timer in it's MPU domain. These timers will be driving the
+ * linux kernel SMP tick framework when active. These timers are not
+ * part of the wake up domain.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is based on arm realview smp platform file.
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ evt->irq = INT_44XX_LOCALTIMER_IRQ;
+ twd_timer_setup(evt);
+}
+
@@ -136,6 +136,34 @@
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt
+ * on the controller, since this requires the original irqstat
+ * value which we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ it cc
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ it cs
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base are preserved */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ itt eq
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
#endif
.macro irq_prio_table
@@ -427,6 +427,8 @@
#define IRQ_GIC_START 32
+#define INT_44XX_LOCALTIMER_IRQ 29
+#define INT_44XX_LOCALWDT_IRQ 30
#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START)
#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START)
This patch adds SMP platform specific parts for local(mpu) timer support for OMAP4430 platform. Each Cortex-a9 core has it's own local timer in the MPU domain. These timers are not in wakeup domain. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> --- arch/arm/mach-omap2/timer-gp.c | 4 +++ arch/arm/mach-omap2/timer-mpu.c | 34 +++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/entry-macro.S | 28 ++++++++++++++++++++ arch/arm/plat-omap/include/mach/irqs.h | 2 + 4 files changed, 68 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/timer-mpu.c