new file mode 100644
@@ -0,0 +1,46 @@
+/*
+ * Secondary CPU startup routine source file.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804
+
+ __INIT
+
+/*
+ * OMAP4 specific entry point for secondary CPU to jump from ROM
+ * code. This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update the this flag using a hardware
+ * register AuxCoreBoot1.
+ */
+ENTRY(omap_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #0x0f
+hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1
+ ldr r2, [r1]
+ cmp r2, r0
+ bne hold
+
+ /*
+ * we've been released from the cpu_release,secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
new file mode 100644
@@ -0,0 +1,178 @@
+/*
+ * OMAP4 SMP source file. It contains platform specific fucntions
+ * needed for the linux smp kernel.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/* Registers used for communicating startup information */
+#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+
+/* SCU base address */
+static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+
+/*
+ * Use SCU config register to count number of cores
+ */
+static inline unsigned int get_core_count(void)
+{
+ if (scu_base)
+ return scu_get_core_count(scu_base);
+ return 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ trace_hardirqs_off();
+
+ /*
+ * If any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+
+ gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * Set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * Update the AuxCoreBoot1 with boot state for secondary core.
+ * omap_secondary_startup() routine will hold the secondary core till
+ * the AuxCoreBoot1 register is updated with cpu state
+ * A barrier is added to ensure that write buffer is drained
+ */
+ __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+ smp_wmb();
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout))
+ ;
+
+ /*
+ * Now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+ /*
+ * Write the address of secondary startup routine into the
+ * AuxCoreBoot0 where ROM code will jump and start executing
+ * on secondary core once out of WFE
+ * A barrier is added to ensure that write buffer is drained
+ */
+ __raw_writel(virt_to_phys(omap_secondary_startup), \
+ OMAP4_AUXCOREBOOT_REG0);
+ smp_wmb();
+
+ /*
+ * Send a 'sev' to wake the secondary core from WFE.
+ */
+ set_event();
+ mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = get_core_count();
+ unsigned int cpu = smp_processor_id();
+ int i;
+
+ /* sanity check */
+ if (ncores == 0) {
+ printk(KERN_ERR
+ "OMAP4: strange core count of 0? Default to 1\n");
+ ncores = 1;
+ }
+
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "OMAP4: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+ smp_store_cpu_info(cpu);
+
+ /*
+ * are we trying to boot more cores than exist?
+ */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
+ if (max_cpus > 1) {
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+
+ /*
+ * Initialise the SCU and wake up the secondary core using
+ * wakeup_secondary().
+ */
+ scu_enable(scu_base);
+ wakeup_secondary();
+ }
+}
new file mode 100644
@@ -0,0 +1,51 @@
+/*
+ * OMAP4 machine specific smp.h
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_SMP_H
+#define OMAP_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/*
+ * set_event() is used to wake up secondary core from wfe using sev. ROM
+ * code puts the second core into wfe(standby).
+ *
+ */
+#define set_event() __asm__ __volatile__ ("sev" : : : "memory")
+
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+
+/*
+ * We use Soft IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+ gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Read MPIDR: Multiprocessor affinity register
+ */
+#define hard_smp_processor_id() \
+ ({ \
+ unsigned int cpunum; \
+ __asm__("mrc p15, 0, %0, c0, c0, 5" \
+ : "=r" (cpunum)); \
+ cpunum &= 0x0F; \
+ })
+
+#endif
(Updated with new interfaces as per Russell's remarks: cpu_set(i, cpu_present_map) --> set_cpu_present(i, true) cpu_set(i, cpu_possible_map) --> set_cpu_possible(i, true) ) This patch adds SMP platform files support for OMAP4430SDP. TI's OMAP4430 SOC is based on ARM Cortex-A9 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> --- arch/arm/mach-omap2/omap-headsmp.S | 46 +++++++++ arch/arm/mach-omap2/omap-smp.c | 178 +++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/mach/smp.h | 51 ++++++++++ 3 files changed, 275 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-omap2/omap-headsmp.S create mode 100644 arch/arm/mach-omap2/omap-smp.c create mode 100644 arch/arm/plat-omap/include/mach/smp.h