@@ -26,8 +26,10 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
+#include <linux/i2c-omap.h>
#include <mach/irqs.h>
#include <mach/mux.h>
+#include <mach/omap-pm.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
@@ -69,14 +71,14 @@ static struct resource i2c_resources[][2] = {
}, \
}
-static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
+static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)];
static struct platform_device omap_i2c_devices[] = {
- I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
+ I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
- I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
+ I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]),
#endif
#if defined(CONFIG_ARCH_OMAP34XX)
- I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
+ I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]),
#endif
};
@@ -100,6 +102,31 @@ static const int omap34xx_pins[][2] = {};
#define OMAP_I2C_CMDLINE_SETUP (BIT(31))
+/**
+ * omap3_i2c_set_wfc_mpu_wkup_lat - sets mpu wake up constraint
+ * @dev: i2c bus device pointer
+ * @set: set or clear constraints
+ *
+ * When waiting for completion of a i2c transfer, we need to set a wake up
+ * latency constraint for the MPU. This is to ensure quick enough wakeup from
+ * idle, when transfer completes. For OMAP3 platform.
+ */
+#ifdef CONFIG_ARCH_OMAP34XX
+static void omap3_i2c_set_wfc_mpu_wkup_lat(struct device *dev, int set)
+{
+ omap_pm_set_max_mpu_wakeup_lat(dev, set ? 400 : -1);
+}
+#endif
+
+static void __init omap_set_i2c_constraint_func(
+ struct omap_i2c_bus_platform_data *pd)
+{
+ if (cpu_is_omap34xx())
+ pd->set_mpu_wkup_lat = omap3_i2c_set_wfc_mpu_wkup_lat;
+ else
+ pd->set_mpu_wkup_lat = NULL;
+}
+
static void __init omap_i2c_mux_pins(int bus)
{
int scl, sda;
@@ -180,8 +207,8 @@ static int __init omap_i2c_bus_setup(char *str)
get_options(str, 3, ints);
if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
return 0;
- i2c_rate[ints[1] - 1] = ints[2];
- i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
+ i2c_pdata[ints[1] - 1].clkrate = ints[2];
+ i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
return 1;
}
@@ -195,9 +222,10 @@ static int __init omap_register_i2c_bus_cmdline(void)
{
int i, err = 0;
- for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
- if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
- i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
+ for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
+ if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
+ i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
+ omap_set_i2c_constraint_func(&i2c_pdata[i]);
err = omap_i2c_add_bus(i + 1);
if (err)
goto out;
@@ -231,9 +259,11 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
return err;
}
- if (!i2c_rate[bus_id - 1])
- i2c_rate[bus_id - 1] = clkrate;
- i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
+ if (!i2c_pdata[bus_id - 1].clkrate)
+ i2c_pdata[bus_id - 1].clkrate = clkrate;
+
+ omap_set_i2c_constraint_func(&i2c_pdata[bus_id - 1]);
+ i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
return omap_i2c_add_bus(bus_id);
}
@@ -37,6 +37,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/i2c-omap.h>
/* I2C controller revisions */
#define OMAP_I2C_REV_2 0x20
@@ -165,6 +166,8 @@ struct omap_i2c_dev {
struct clk *fclk; /* Functional clock */
struct completion cmd_complete;
struct resource *ioarea;
+ void (*set_mpu_wkup_lat)(struct device *dev,
+ int set);
u32 speed; /* Speed of bus in Khz */
u16 cmd_err;
u8 *buf;
@@ -526,8 +529,12 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
* REVISIT: We should abort the transfer on signals, but the bus goes
* into arbitration and we're currently unable to recover from it.
*/
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, 1);
r = wait_for_completion_timeout(&dev->cmd_complete,
OMAP_I2C_TIMEOUT);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, 0);
dev->buf_len = 0;
if (r < 0)
return r;
@@ -844,6 +851,7 @@ omap_i2c_probe(struct platform_device *pdev)
struct omap_i2c_dev *dev;
struct i2c_adapter *adap;
struct resource *mem, *irq, *ioarea;
+ struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
irq_handler_t isr;
int r;
u32 speed = 0;
@@ -873,10 +881,13 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_release_region;
}
- if (pdev->dev.platform_data != NULL)
- speed = *(u32 *)pdev->dev.platform_data;
- else
- speed = 100; /* Defualt speed */
+ if (pdata != NULL) {
+ speed = pdata->clkrate;
+ dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
+ } else {
+ speed = 100; /* Default speed */
+ dev->set_mpu_wkup_lat = NULL;
+ }
dev->speed = speed;
dev->idle = 1;
new file mode 100644
@@ -0,0 +1,9 @@
+#ifndef __I2C_OMAP_H__
+#define __I2C_OMAP_H__
+
+struct omap_i2c_bus_platform_data {
+ u32 clkrate;
+ void (*set_mpu_wkup_lat)(struct device *dev, int set);
+};
+
+#endif