From patchwork Fri Oct 16 14:12:40 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ilkka Koskinen X-Patchwork-Id: 54265 Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id n9GEMqBe026538 for ; Fri, 16 Oct 2009 14:22:52 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760068AbZJPOOU (ORCPT ); Fri, 16 Oct 2009 10:14:20 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1759591AbZJPOOT (ORCPT ); Fri, 16 Oct 2009 10:14:19 -0400 Received: from smtp.nokia.com ([192.100.122.230]:20098 "EHLO mgw-mx03.nokia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760061AbZJPOOQ (ORCPT ); Fri, 16 Oct 2009 10:14:16 -0400 Received: from vaebh106.NOE.Nokia.com (vaebh106.europe.nokia.com [10.160.244.32]) by mgw-mx03.nokia.com (Switch-3.3.3/Switch-3.3.3) with ESMTP id n9GECffA031590; Fri, 16 Oct 2009 17:12:44 +0300 Received: from vaebh104.NOE.Nokia.com ([10.160.244.30]) by vaebh106.NOE.Nokia.com with Microsoft SMTPSVC(6.0.3790.3959); Fri, 16 Oct 2009 17:12:41 +0300 Received: from mgw-sa02.ext.nokia.com ([147.243.1.48]) by vaebh104.NOE.Nokia.com over TLS secured channel with Microsoft SMTPSVC(6.0.3790.3959); Fri, 16 Oct 2009 17:12:40 +0300 Received: from localhost.localdomain (tumpelo.ntc.nokia.com [172.22.144.93]) by mgw-sa02.ext.nokia.com (Switch-3.3.3/Switch-3.3.3) with ESMTP id n9GECdBI031272; Fri, 16 Oct 2009 17:12:39 +0300 From: Ilkka Koskinen To: linux-kernel@vger.kernel.org, sameo@linux.intel.com Cc: linux-omap@vger.kernel.org, ilkka.koskinen@nokia.com, felipe.balbi@nokia.com Subject: [PATCH v2] TWL4030: Initial support for TWL5031 Date: Fri, 16 Oct 2009 17:12:40 +0300 Message-Id: <1255702360-2143-1-git-send-email-ilkka.koskinen@nokia.com> X-Mailer: git-send-email 1.6.0.4 X-OriginalArrivalTime: 16 Oct 2009 14:12:40.0833 (UTC) FILETIME=[B8DAD710:01CA4E6A] X-Nokia-AV: Clean Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index 5596bb4..5dc5062 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -152,6 +152,9 @@ #define TWL4030_BASEADD_PWMB 0x00F1 #define TWL4030_BASEADD_KEYPAD 0x00D2 +#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */ +#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different to TWL4030's one */ + /* subchip/slave 3 - POWER ID */ #define TWL4030_BASEADD_BACKUP 0x0014 #define TWL4030_BASEADD_INT 0x002E @@ -183,6 +186,7 @@ /* chip-specific feature flags, for i2c_device_id.driver_data */ #define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */ #define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */ +#define TWL5031 BIT(2) /* twl5031 has different registers */ /*----------------------------------------------------------------------*/ @@ -235,6 +239,8 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { { 2, TWL4030_BASEADD_PWM1 }, { 2, TWL4030_BASEADD_PWMA }, { 2, TWL4030_BASEADD_PWMB }, + { 2, TWL5031_BASEADD_ACCESSORY }, + { 2, TWL5031_BASEADD_INTERRUPTS }, { 3, TWL4030_BASEADD_BACKUP }, { 3, TWL4030_BASEADD_INT }, @@ -483,7 +489,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) struct device *child; struct device *usb_transceiver = NULL; - if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) { + if (twl_has_bci() && pdata->bci && + !((features & TPS_SUBSET) || (features & TWL5031))) { child = add_child(3, "twl4030_bci", pdata->bci, sizeof(*pdata->bci), false, @@ -743,6 +750,7 @@ static void clocks_init(struct device *dev, int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); int twl_exit_irq(void); +int twl_init_chip_irq(const char *chip); static int twl4030_remove(struct i2c_client *client) { @@ -820,6 +828,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) if (client->irq && pdata->irq_base && pdata->irq_end > pdata->irq_base) { + twl_init_chip_irq(id->name); status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); if (status < 0) goto fail; @@ -835,6 +844,7 @@ fail: static const struct i2c_device_id twl4030_ids[] = { { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ { "twl5030", 0 }, /* T2 updated */ + { "twl5031", TWL5031 }, /* TWL5030 updated */ { "tps65950", 0 }, /* catalog version of twl5030 */ { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */ { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index fb194fe..a64994e 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -61,6 +61,7 @@ /* Linux could (eventually) use either IRQ line */ static int irq_line; +static int chip_is_twl5031; struct sih { char name[8]; @@ -82,6 +83,9 @@ struct sih { /* + 2 bytes padding */ }; +static const struct sih *sih_modules; +static int nr_sih_modules; + #define SIH_INITIALIZER(modname, nbits) \ .module = TWL4030_MODULE_ ## modname, \ .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ @@ -107,7 +111,8 @@ struct sih { /* Order in this table matches order in PIH_ISR. That is, * BIT(n) in PIH_ISR is sih_modules[n]. */ -static const struct sih sih_modules[6] = { +/* sih_modules_twl4030 is used for twl4030 and twl5030 */ +static const struct sih sih_modules_twl4030[6] = { [0] = { .name = "gpio", .module = TWL4030_MODULE_GPIO, @@ -164,6 +169,84 @@ static const struct sih sih_modules[6] = { /* there are no SIH modules #6 or #7 ... */ }; +static const struct sih sih_modules_twl5031[8] = { + [0] = { + .name = "gpio", + .module = TWL4030_MODULE_GPIO, + .control_offset = REG_GPIO_SIH_CTRL, + .set_cor = true, + .bits = TWL4030_GPIO_MAX, + .bytes_ixr = 3, + /* Note: *all* of these IRQs default to no-trigger */ + .edr_offset = REG_GPIO_EDR1, + .bytes_edr = 5, + .mask = { { + .isr_offset = REG_GPIO_ISR1A, + .imr_offset = REG_GPIO_IMR1A, + }, { + .isr_offset = REG_GPIO_ISR1B, + .imr_offset = REG_GPIO_IMR1B, + }, }, + }, + [1] = { + .name = "keypad", + .set_cor = true, + SIH_INITIALIZER(KEYPAD_KEYP, 4) + }, + [2] = { + .name = "bci", + .module = TWL5031_MODULE_INTERRUPTS, + .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL, + .bits = 7, + .bytes_ixr = 1, + .edr_offset = TWL5031_INTERRUPTS_BCIEDR1, + /* Note: most of these IRQs default to no-trigger */ + .bytes_edr = 2, + .mask = { { + .isr_offset = TWL5031_INTERRUPTS_BCIISR1, + .imr_offset = TWL5031_INTERRUPTS_BCIIMR1, + }, { + .isr_offset = TWL5031_INTERRUPTS_BCIISR2, + .imr_offset = TWL5031_INTERRUPTS_BCIIMR2, + }, }, + }, + [3] = { + .name = "madc", + SIH_INITIALIZER(MADC, 4) + }, + [4] = { + /* USB doesn't use the same SIH organization */ + .name = "usb", + }, + [5] = { + .name = "power", + .set_cor = true, + SIH_INITIALIZER(INT_PWR, 8) + }, + [6] = { + /* ACI doesn't use the same SIH organization */ + .name = "aci", + }, + [7] = { + /* Accessory */ + .name = "acc", + .module = TWL5031_MODULE_ACCESSORY, + .control_offset = TWL5031_ACCSIHCTRL, + .bits = 2, + .bytes_ixr = 1, + .edr_offset = TWL5031_ACCEDR1, + /* Note: most of these IRQs default to no-trigger */ + .bytes_edr = 1, + .mask = { { + .isr_offset = TWL5031_ACCISR1, + .imr_offset = TWL5031_ACCIMR1, + }, { + .isr_offset = TWL5031_ACCISR2, + .imr_offset = TWL5031_ACCIMR2, + }, }, + }, +}; + #undef TWL4030_MODULE_KEYPAD_KEYP #undef TWL4030_MODULE_INT_PWR #undef TWL4030_INT_PWR_EDR @@ -284,11 +367,20 @@ static int twl4030_init_sih_modules(unsigned line) /* disable all interrupts on our line */ memset(buf, 0xff, sizeof buf); sih = sih_modules; - for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { + for (i = 0; i < nr_sih_modules; i++, sih++) { /* skip USB -- it's funky */ - if (!sih->bytes_ixr) + /* But don't skip TWL5031's ACI */ + if (!sih->bytes_ixr) { + if (chip_is_twl5031 && !strcmp(sih->name, "aci")) { + twl4030_i2c_write(TWL5031_MODULE_ACCESSORY, + buf, TWL5031_ACIIMR_LSB, 1); + twl4030_i2c_write(TWL5031_MODULE_ACCESSORY, + buf, TWL5031_ACIIMR_MSB, 1); + } + continue; + } status = twl4030_i2c_write(sih->module, buf, sih->mask[line].imr_offset, sih->bytes_ixr); @@ -314,13 +406,22 @@ static int twl4030_init_sih_modules(unsigned line) } sih = sih_modules; - for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { + for (i = 0; i < nr_sih_modules; i++, sih++) { u8 rxbuf[4]; int j; /* skip USB */ - if (!sih->bytes_ixr) + /* But don't skip TWL5031's ACI */ + if (!sih->bytes_ixr) { + if (chip_is_twl5031 && !strcmp(sih->name, "aci")) { + twl4030_i2c_write(TWL5031_MODULE_ACCESSORY, + buf, TWL5031_ACIIDR_LSB, 1); + twl4030_i2c_write(TWL5031_MODULE_ACCESSORY, + buf, TWL5031_ACIIDR_MSB, 1); + } + continue; + } /* Clear pending interrupt status. Either the read was * enough, or we need to write those bits. Repeat, in @@ -611,7 +712,7 @@ int twl4030_sih_setup(int module) /* only support modules with standard clear-on-read for now */ for (sih_mod = 0, sih = sih_modules; - sih_mod < ARRAY_SIZE(sih_modules); + sih_mod < nr_sih_modules; sih_mod++, sih++) { if (sih->module == module && sih->set_cor) { if (!WARN((irq_base + sih->bits) > NR_IRQS, @@ -756,3 +857,17 @@ int twl_exit_irq(void) } return 0; } + +int twl_init_chip_irq(const char *chip) +{ + if (!strcmp(chip, "twl5031")) { + chip_is_twl5031 = 1; + sih_modules = sih_modules_twl5031; + nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031); + } else { + sih_modules = sih_modules_twl4030; + nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030); + } + + return 0; +} diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index c8d5078..3fd5791 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -61,13 +61,16 @@ #define TWL4030_MODULE_PWMA 0x0E #define TWL4030_MODULE_PWMB 0x0F +#define TWL5031_MODULE_ACCESSORY 0x10 +#define TWL5031_MODULE_INTERRUPTS 0x11 + /* Slave 3 (i2c address 0x4b) */ -#define TWL4030_MODULE_BACKUP 0x10 -#define TWL4030_MODULE_INT 0x11 -#define TWL4030_MODULE_PM_MASTER 0x12 -#define TWL4030_MODULE_PM_RECEIVER 0x13 -#define TWL4030_MODULE_RTC 0x14 -#define TWL4030_MODULE_SECURED_REG 0x15 +#define TWL4030_MODULE_BACKUP 0x12 +#define TWL4030_MODULE_INT 0x13 +#define TWL4030_MODULE_PM_MASTER 0x14 +#define TWL4030_MODULE_PM_RECEIVER 0x15 +#define TWL4030_MODULE_RTC 0x16 +#define TWL4030_MODULE_SECURED_REG 0x17 /* * Read and write single 8-bit registers @@ -221,6 +224,38 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /*----------------------------------------------------------------------*/ +/* + * Accessory Interrupts + */ +#define TWL5031_ACIIMR_LSB 0x05 +#define TWL5031_ACIIMR_MSB 0x06 +#define TWL5031_ACIIDR_LSB 0x07 +#define TWL5031_ACIIDR_MSB 0x08 +#define TWL5031_ACCISR1 0x0F +#define TWL5031_ACCIMR1 0x10 +#define TWL5031_ACCISR2 0x11 +#define TWL5031_ACCIMR2 0x12 +#define TWL5031_ACCSIR 0x13 +#define TWL5031_ACCEDR1 0x14 +#define TWL5031_ACCSIHCTRL 0x15 + +/*----------------------------------------------------------------------*/ + +/* + * Battery Charger Controller + */ + +#define TWL5031_INTERRUPTS_BCIISR1 0x0 +#define TWL5031_INTERRUPTS_BCIIMR1 0x1 +#define TWL5031_INTERRUPTS_BCIISR2 0x2 +#define TWL5031_INTERRUPTS_BCIIMR2 0x3 +#define TWL5031_INTERRUPTS_BCISIR 0x4 +#define TWL5031_INTERRUPTS_BCIEDR1 0x5 +#define TWL5031_INTERRUPTS_BCIEDR2 0x6 +#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7 + +/*----------------------------------------------------------------------*/ + /* Power bus message definitions */ /* The TWL4030/5030 splits its power-management resources (the various