@@ -736,7 +736,57 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+CONFIG_PANEL_SHARP_LQ043T1DG01=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -749,6 +799,8 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
@@ -34,6 +34,7 @@
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/common.h>
+#include <plat/display.h>
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
@@ -128,7 +129,143 @@ void __init am3517evm_flash_init(void)
}
}
+#define LCD_PANEL_PWR 176
+#define LCD_PANEL_BKLIGHT_PWR 182
+#define LCD_PANEL_PWM 181
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init am3517_evm_display_init(void)
+{
+ int r;
+
+ /*
+ * Enable GPIO 182 = LCD Backlight Power
+ */
+ r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
+ return;
+ }
+ gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
+ /*
+ * Enable GPIO 181 = LCD Panel PWM
+ */
+ r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_pwm\n");
+ goto err_1;
+ }
+ gpio_direction_output(LCD_PANEL_PWM, 1);
+ /*
+ * Enable GPIO 176 = LCD Panel Power enable pin
+ */
+ r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
+ if (r) {
+ printk(KERN_ERR "failed to get lcd_panel_pwr\n");
+ goto err_2;
+ }
+ gpio_direction_output(LCD_PANEL_PWR, 1);
+
+ printk(KERN_INFO "Display initialized successfully\n");
+ return;
+
+err_2:
+ gpio_free(LCD_PANEL_PWM);
+err_1:
+ gpio_free(LCD_PANEL_BKLIGHT_PWR);
+}
+
+static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+ gpio_set_value(LCD_PANEL_PWR, 1);
+ lcd_enabled = 1;
+
+ return 0;
+}
+
+static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(LCD_PANEL_PWR, 0);
+ lcd_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_lcd_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "lcd",
+ .driver_name = "sharp_lq_panel",
+ .phy.dpi.data_lines = 16,
+ .platform_enable = am3517_evm_panel_enable_lcd,
+ .platform_disable = am3517_evm_panel_disable_lcd,
+};
+
+static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device am3517_evm_tv_device = {
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .name = "tv",
+ .driver_name = "venc",
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = am3517_evm_panel_enable_tv,
+ .platform_disable = am3517_evm_panel_disable_tv,
+};
+
+static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+ dvi_enabled = 1;
+
+ return 0;
+}
+
+static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+ dvi_enabled = 0;
+}
+
+static struct omap_dss_device am3517_evm_dvi_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .phy.dpi.data_lines = 24,
+ .platform_enable = am3517_evm_panel_enable_dvi,
+ .platform_disable = am3517_evm_panel_disable_dvi,
+};
+
+static struct omap_dss_device *am3517_evm_dss_devices[] = {
+ &am3517_evm_lcd_device,
+ &am3517_evm_tv_device,
+ &am3517_evm_dvi_device,
+};
+
+static struct omap_dss_board_info am3517_evm_dss_data = {
+ .num_devices = ARRAY_SIZE(am3517_evm_dss_devices),
+ .devices = am3517_evm_dss_devices,
+ .default_device = &am3517_evm_lcd_device,
+};
+
+struct platform_device am3517_evm_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &am3517_evm_dss_data,
+ },
+};
/*
* initialization
@@ -137,6 +274,7 @@ static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
};
static struct platform_device *am3517_evm_devices[] __initdata = {
+ &am3517_evm_dss_device,
};
static void __init am3517_evm_init_irq(void)
@@ -156,6 +294,8 @@ static void __init am3517_evm_init(void)
omap_serial_init();
am3517evm_flash_init();
+
+ am3517_evm_display_init();
}
static void __init am3517_evm_map_io(void)