different regulators and platforms.
Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
---
arch/arm/mach-omap2/board-omap3evm.c | 45 ----------------------------------
1 files changed, 0 insertions(+), 45 deletions(-)
@@ -94,44 +94,6 @@ static inline void __init omap3evm_init_smc911x(void)
gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
}
-static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply omap3evm_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
-/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
-static struct regulator_init_data omap3evm_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vmmc1_supply,
-};
-
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data omap3evm_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &omap3evm_vsim_supply,
-};
-
static struct twl4030_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -165,7 +127,6 @@ static struct platform_device leds_gpio = {
},
};
-
static int omap3evm_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -174,10 +135,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
- /* link regulators to MMC adapters */
- omap3evm_vmmc1_supply.dev = mmc[0].dev;
- omap3evm_vsim_supply.dev = mmc[0].dev;
-
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
@@ -247,8 +204,6 @@ static struct twl4030_platform_data omap3evm_twldata = {
.madc = &omap3evm_madc_data,
.usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
- .vmmc1 = &omap3evm_vmmc1,
- .vsim = &omap3evm_vsim,
};
static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {