diff mbox

[1/2] staging: iio: tsl2563 ambient light sensor driver

Message ID 1257772468-4004-1-git-send-email-amit.kucheria@verdurent.com (mailing list archive)
State Awaiting Upstream, archived
Delegated to: Tony Lindgren
Headers show

Commit Message

Amit Kucheria Nov. 9, 2009, 1:14 p.m. UTC
None
diff mbox

Patch

diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index 12af0c4..cf0d0d6 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -11,3 +11,14 @@  config TSL2561
 	convertor.  This chip has two light sensors. One is broadband
 	including infrared whilst the other measures only infrared.
 	Provides direct access via sysfs.
+
+config SENSORS_TSL2563
+	tristate "TAOS TSL2563 ambient light sensor"
+	depends on I2C
+	help
+	 If you say yes here you get support for the Taos TSL2563
+	 ambient light sensor (found in N900).
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tsl2563.
+
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index ccff151..30dbfb1 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -3,3 +3,4 @@ 
 #
 
 obj-$(CONFIG_TSL2561)   += tsl2561.o
+obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
new file mode 100644
index 0000000..3e812b2
--- /dev/null
+++ b/drivers/staging/iio/light/tsl2563.c
@@ -0,0 +1,772 @@ 
+/*
+ * drivers/i2c/chips/tsl2563.c
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
+ * Contact: Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * Converted to IIO driver
+ * Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
+
+#include "../iio.h"
+#include "tsl2563.h"
+
+#define DRIVER_NAME  "tsl2563"
+
+/* Use this many bits for fraction part. */
+#define ADC_FRAC_BITS		(14)
+
+/* Given number of 1/10000's in ADC_FRAC_BITS precision. */
+#define FRAC10K(f)		(((f) * (1L << (ADC_FRAC_BITS))) / (10000))
+
+/* Bits used for fraction in calibration coefficients.*/
+#define CALIB_FRAC_BITS		(10)
+/* 0.5 in CALIB_FRAC_BITS precision */
+#define CALIB_FRAC_HALF		(1 << (CALIB_FRAC_BITS - 1))
+/* Make a fraction from a number n that was multiplied with b. */
+#define CALIB_FRAC(n, b)	(((n) << CALIB_FRAC_BITS) / (b))
+/* Decimal 10^(digits in sysfs presentation) */
+#define CALIB_BASE_SYSFS	(1000)
+
+#define TSL2563_CMD		(0x80)
+#define TSL2563_CLEARINT	(0x40)
+
+#define TSL2563_REG_CTRL	(0x00)
+#define TSL2563_REG_TIMING	(0x01)
+#define TSL2563_REG_LOWLOW	(0x02) /* data0 low threshold, 2 bytes */
+#define TSL2563_REG_LOWHIGH	(0x03)
+#define TSL2563_REG_HIGHLOW	(0x04) /* data0 high threshold, 2 bytes */
+#define TSL2563_REG_HIGHHIGH	(0x05)
+#define TSL2563_REG_INT		(0x06)
+#define TSL2563_REG_ID		(0x0a)
+#define TSL2563_REG_DATA0LOW	(0x0c) /* broadband sensor value, 2 bytes */
+#define TSL2563_REG_DATA0HIGH	(0x0d)
+#define TSL2563_REG_DATA1LOW	(0x0e) /* infrared sensor value, 2 bytes */
+#define TSL2563_REG_DATA1HIGH	(0x0f)
+
+#define TSL2563_CMD_POWER_ON	(0x03)
+#define TSL2563_CMD_POWER_OFF	(0x00)
+#define TSL2563_CTRL_POWER_MASK	(0x03)
+
+#define TSL2563_TIMING_13MS	(0x00)
+#define TSL2563_TIMING_100MS	(0x01)
+#define TSL2563_TIMING_400MS	(0x02)
+#define TSL2563_TIMING_MASK	(0x03)
+#define TSL2563_TIMING_GAIN16	(0x10)
+#define TSL2563_TIMING_GAIN1	(0x00)
+
+#define TSL2563_INT_DISBLED	(0x00)
+#define TSL2563_INT_LEVEL	(0x10)
+#define TSL2563_INT_PERSIST(n)	((n) & 0x0F)
+
+struct tsl2563_gainlevel_coeff {
+	u8 gaintime;
+	u16 min;
+	u16 max;
+};
+
+static struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = {
+	{
+		.gaintime	= TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16,
+		.min		= 0,
+		.max		= 65534,
+	}, {
+		.gaintime	= TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1,
+		.min		= 2048,
+		.max		= 65534,
+	}, {
+		.gaintime	= TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1,
+		.min		= 4095,
+		.max		= 37177,
+	}, {
+		.gaintime	= TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1,
+		.min		= 3000,
+		.max		= 65535,
+	},
+};
+
+struct tsl2563_chip {
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct iio_dev		*indio_dev;
+	struct delayed_work	poweroff_work;
+
+	/* Remember state for suspend and resume functions */
+	pm_message_t		state;
+
+	struct tsl2563_gainlevel_coeff *gainlevel;
+
+	/* Thresholds are in lux */
+	u16			low_thres;
+	u16			high_thres;
+	u8			intr;
+
+	/* Calibration coefficients */
+	u32			calib0;
+	u32			calib1;
+	int			cover_comp_gain;
+
+	/* Cache current values, to be returned while suspended */
+	u32			data0;
+	u32			data1;
+};
+
+static int tsl2563_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	int ret;
+	u8 buf[2];
+
+	buf[0] = TSL2563_CMD | reg;
+	buf[1] = value;
+
+	ret = i2c_master_send(client, buf, sizeof(buf));
+	return (ret == sizeof(buf)) ? 0 : ret;
+}
+
+static int tsl2563_read(struct i2c_client *client, u8 reg, void *buf, int len)
+{
+	int ret;
+	u8 cmd = TSL2563_CMD | reg;
+
+	ret = i2c_master_send(client, &cmd, sizeof(cmd));
+	if (ret != sizeof(cmd))
+		return ret;
+
+	return i2c_master_recv(client, buf, len);
+}
+
+static int tsl2563_set_power(struct tsl2563_chip *chip, int on)
+{
+	struct i2c_client *client = chip->client;
+	u8 cmd;
+
+	cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF;
+	return tsl2563_write(client, TSL2563_REG_CTRL, cmd);
+}
+
+/*
+ * Return value is 0 for off, 1 for on, or a negative error
+ * code if reading failed.
+ */
+static int tsl2563_get_power(struct tsl2563_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+	u8 val;
+
+	ret = tsl2563_read(client, TSL2563_REG_CTRL, &val, sizeof(val));
+	if (ret != sizeof(val))
+		return ret;
+
+	return (val & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
+}
+
+static int tsl2563_configure(struct tsl2563_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = tsl2563_write(client, TSL2563_REG_TIMING,
+			chip->gainlevel->gaintime);
+	if (ret)
+		goto out;
+
+	ret = tsl2563_write(client, TSL2563_REG_INT, chip->intr);
+
+out:
+	return ret;
+}
+
+static void tsl2563_poweroff_work(struct work_struct *work)
+{
+	struct tsl2563_chip *chip =
+		container_of(work, struct tsl2563_chip, poweroff_work.work);
+	tsl2563_set_power(chip, 0);
+}
+
+static int tsl2563_detect(struct tsl2563_chip *chip)
+{
+	int ret;
+
+	ret = tsl2563_set_power(chip, 1);
+	if (ret)
+		return ret;
+
+	ret = tsl2563_get_power(chip);
+	if (ret < 0)
+		return ret;
+
+	return ret ? 0 : -ENODEV;
+}
+
+static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = tsl2563_read(client, TSL2563_REG_ID, id, sizeof(*id));
+	if (ret != sizeof(*id))
+		return ret;
+
+	return 0;
+}
+
+/*
+ * "Normalized" ADC value is one obtained with 400ms of integration time and
+ * 16x gain. This function returns the number of bits of shift needed to
+ * convert between normalized values and HW values obtained using given
+ * timing and gain settings.
+ */
+static int adc_shiftbits(u8 timing)
+{
+	int shift = 0;
+
+	switch (timing & TSL2563_TIMING_MASK) {
+	case TSL2563_TIMING_13MS:
+		shift += 5;
+		break;
+	case TSL2563_TIMING_100MS:
+		shift += 2;
+		break;
+	case TSL2563_TIMING_400MS:
+		/* no-op */
+		break;
+	}
+
+	if (!(timing & TSL2563_TIMING_GAIN16))
+		shift += 4;
+
+	return shift;
+}
+
+/* Convert a HW ADC value to normalized scale. */
+static u32 normalize_adc(u16 adc, u8 timing)
+{
+	return adc << adc_shiftbits(timing);
+}
+
+static void tsl2563_wait_adc(struct tsl2563_chip *chip)
+{
+	unsigned int delay;
+
+	switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) {
+	case TSL2563_TIMING_13MS:
+		delay = 14;
+		break;
+	case TSL2563_TIMING_100MS:
+		delay = 101;
+		break;
+	default:
+		delay = 402;
+	}
+	/*
+	 * TODO: Make sure that we wait at least required delay but why we
+	 * have to extend it one tick more?
+	 */
+	schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
+}
+
+static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
+{
+	struct i2c_client *client = chip->client;
+
+	if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) {
+
+		(adc > chip->gainlevel->max) ?
+			chip->gainlevel++ : chip->gainlevel--;
+
+		tsl2563_write(client, TSL2563_REG_TIMING,
+			      chip->gainlevel->gaintime);
+
+		tsl2563_wait_adc(chip);
+		tsl2563_wait_adc(chip);
+
+		return 1;
+	} else
+		return 0;
+}
+
+static int tsl2563_get_adc(struct tsl2563_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	u8 buf0[2], buf1[2];
+	u16 adc0, adc1;
+	int retry = 1;
+	int ret = 0;
+
+	if (chip->state.event != PM_EVENT_ON)
+		goto out;
+
+	cancel_delayed_work(&chip->poweroff_work);
+
+	if (!tsl2563_get_power(chip)) {
+		ret = tsl2563_set_power(chip, 1);
+		if (ret)
+			goto out;
+		ret = tsl2563_configure(chip);
+		if (ret)
+			goto out;
+		tsl2563_wait_adc(chip);
+	}
+
+	while (retry) {
+		ret = tsl2563_read(client,
+				   TSL2563_REG_DATA0LOW | TSL2563_CLEARINT,
+				   buf0, sizeof(buf0));
+		if (ret != sizeof(buf0))
+			goto out;
+
+		ret = tsl2563_read(client, TSL2563_REG_DATA1LOW,
+				   buf1, sizeof(buf1));
+		if (ret != sizeof(buf1))
+			goto out;
+
+		adc0 = (buf0[1] << 8) + buf0[0];
+		adc1 = (buf1[1] << 8) + buf1[0];
+
+		retry = tsl2563_adjust_gainlevel(chip, adc0);
+	}
+
+	chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime);
+	chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime);
+
+	schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+
+	ret = 0;
+out:
+	return ret;
+}
+
+static inline int calib_to_sysfs(u32 calib)
+{
+	return (int) (((calib * CALIB_BASE_SYSFS) +
+		       CALIB_FRAC_HALF) >> CALIB_FRAC_BITS);
+}
+
+static inline u32 calib_from_sysfs(int value)
+{
+	return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
+}
+
+/*
+ * Conversions between lux and ADC values.
+ *
+ * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are
+ * appropriate constants. Different constants are needed for different
+ * kinds of light, determined by the ratio adc1/adc0 (basically the ratio
+ * of the intensities in infrared and visible wavelengths). lux_table below
+ * lists the upper threshold of the adc1/adc0 ratio and the corresponding
+ * constants.
+ */
+
+struct tsl2563_lux_coeff {
+	unsigned long ch_ratio;
+	unsigned long ch0_coeff;
+	unsigned long ch1_coeff;
+};
+
+static const struct tsl2563_lux_coeff lux_table[] = {
+	{
+		.ch_ratio	= FRAC10K(1300),
+		.ch0_coeff	= FRAC10K(315),
+		.ch1_coeff	= FRAC10K(262),
+	}, {
+		.ch_ratio	= FRAC10K(2600),
+		.ch0_coeff	= FRAC10K(337),
+		.ch1_coeff	= FRAC10K(430),
+	}, {
+		.ch_ratio	= FRAC10K(3900),
+		.ch0_coeff	= FRAC10K(363),
+		.ch1_coeff	= FRAC10K(529),
+	}, {
+		.ch_ratio	= FRAC10K(5200),
+		.ch0_coeff	= FRAC10K(392),
+		.ch1_coeff	= FRAC10K(605),
+	}, {
+		.ch_ratio	= FRAC10K(6500),
+		.ch0_coeff	= FRAC10K(229),
+		.ch1_coeff	= FRAC10K(291),
+	}, {
+		.ch_ratio	= FRAC10K(8000),
+		.ch0_coeff	= FRAC10K(157),
+		.ch1_coeff	= FRAC10K(180),
+	}, {
+		.ch_ratio	= FRAC10K(13000),
+		.ch0_coeff	= FRAC10K(34),
+		.ch1_coeff	= FRAC10K(26),
+	}, {
+		.ch_ratio	= ULONG_MAX,
+		.ch0_coeff	= 0,
+		.ch1_coeff	= 0,
+	},
+};
+
+/*
+ * Convert normalized, scaled ADC values to lux.
+ */
+static unsigned int adc_to_lux(u32 adc0, u32 adc1)
+{
+	const struct tsl2563_lux_coeff *lp = lux_table;
+	unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;
+
+	ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX;
+
+	while (lp->ch_ratio < ratio)
+		lp++;
+
+	lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff;
+
+	return (unsigned int) (lux >> ADC_FRAC_BITS);
+}
+
+/*--------------------------------------------------------------*/
+/*                      Sysfs interface                         */
+/*--------------------------------------------------------------*/
+
+static ssize_t tsl2563_adc0_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_get_adc(chip);
+	if (ret)
+		goto out;
+
+	ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data0);
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static ssize_t tsl2563_adc1_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_get_adc(chip);
+	if (ret)
+		goto out;
+
+	ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data1);
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+/* Apply calibration coefficient to ADC count. */
+static u32 calib_adc(u32 adc, u32 calib)
+{
+	unsigned long scaled = adc;
+
+	scaled *= calib;
+	scaled >>= CALIB_FRAC_BITS;
+
+	return (u32) scaled;
+}
+
+static ssize_t tsl2563_lux_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	u32 calib0, calib1;
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_get_adc(chip);
+	if (ret)
+		goto out;
+
+	calib0 = calib_adc(chip->data0, chip->calib0) * chip->cover_comp_gain;
+	calib1 = calib_adc(chip->data1, chip->calib1) * chip->cover_comp_gain;
+
+	ret = snprintf(buf, PAGE_SIZE, "%d\n", adc_to_lux(calib0, calib1));
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static ssize_t format_calib(char *buf, int len, u32 calib)
+{
+	return snprintf(buf, PAGE_SIZE, "%d\n", calib_to_sysfs(calib));
+}
+
+static ssize_t tsl2563_calib0_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = format_calib(buf, PAGE_SIZE, chip->calib0);
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static ssize_t tsl2563_calib1_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = format_calib(buf, PAGE_SIZE, chip->calib1);
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int do_calib_store(struct device *dev, const char *buf, size_t len,
+			  int ch)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct tsl2563_chip *chip = indio_dev->dev_data;
+	int value;
+	u32 calib;
+
+	if (1 != sscanf(buf, "%d", &value))
+		return -EINVAL;
+
+	calib = calib_from_sysfs(value);
+
+	if (ch)
+		chip->calib1 = calib;
+	else
+		chip->calib0 = calib;
+
+	return len;
+}
+
+static ssize_t tsl2563_calib0_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t len)
+{
+	return do_calib_store(dev, buf, len, 0);
+}
+
+static ssize_t tsl2563_calib1_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t len)
+{
+	return do_calib_store(dev, buf, len, 1);
+}
+
+/* AmitXXXX: Convert to IIO_DEV_ATTR_LIGHT* as in tsl2561
+ * once I understand what they mean */
+static DEVICE_ATTR(adc0, S_IRUGO, tsl2563_adc0_show, NULL);
+static DEVICE_ATTR(adc1, S_IRUGO, tsl2563_adc1_show, NULL);
+static DEVICE_ATTR(lux, S_IRUGO, tsl2563_lux_show, NULL);
+static DEVICE_ATTR(calib0, S_IRUGO | S_IWUSR,
+		   tsl2563_calib0_show, tsl2563_calib0_store);
+static DEVICE_ATTR(calib1, S_IRUGO | S_IWUSR,
+		   tsl2563_calib1_show, tsl2563_calib1_store);
+
+static struct attribute *tsl2563_attributes[] = {
+	&dev_attr_adc0.attr,
+	&dev_attr_adc1.attr,
+	&dev_attr_lux.attr,
+	&dev_attr_calib0.attr,
+	&dev_attr_calib1.attr,
+	NULL
+};
+
+static const struct attribute_group tsl2563_group = {
+	.attrs = tsl2563_attributes,
+};
+
+/*--------------------------------------------------------------*/
+/*                      Probe, Attach, Remove                   */
+/*--------------------------------------------------------------*/
+static struct i2c_driver tsl2563_i2c_driver;
+
+static int __devinit tsl2563_probe(struct i2c_client *client,
+				const struct i2c_device_id *device_id)
+{
+	struct tsl2563_chip *chip;
+	struct tsl2563_platform_data *pdata = client->dev.platform_data;
+	int err = 0;
+	int ret;
+	u8 id;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	err = tsl2563_detect(chip);
+	if (err) {
+		dev_err(&client->dev, "device not found, error %d \n", -err);
+		goto fail1;
+	}
+
+	err = tsl2563_read_id(chip, &id);
+	if (err)
+		goto fail1;
+
+	mutex_init(&chip->lock);
+
+	/* Default values used until userspace says otherwise */
+	chip->low_thres = 0x0;
+	chip->high_thres = 0xffff;
+	chip->gainlevel = tsl2563_gainlevel_table;
+	chip->intr = TSL2563_INT_PERSIST(4);
+	chip->calib0 = calib_from_sysfs(CALIB_BASE_SYSFS);
+	chip->calib1 = calib_from_sysfs(CALIB_BASE_SYSFS);
+
+	if (pdata)
+		chip->cover_comp_gain = pdata->cover_comp_gain;
+	else
+		chip->cover_comp_gain = 1;
+
+	dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
+
+	chip->indio_dev = iio_allocate_device();
+	if (!chip->indio_dev)
+		goto fail1;
+	chip->indio_dev->attrs = &tsl2563_group;
+	chip->indio_dev->dev.parent = &client->dev;
+	chip->indio_dev->dev_data = (void *)(chip);
+	chip->indio_dev->driver_module = THIS_MODULE;
+	chip->indio_dev->modes = INDIO_DIRECT_MODE;
+	ret = iio_device_register(chip->indio_dev);
+	if (ret)
+		goto fail1;
+
+	err = tsl2563_configure(chip);
+	if (err)
+		goto fail2;
+
+	INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);
+	schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+
+	return 0;
+fail2:
+	iio_device_unregister(chip->indio_dev);
+fail1:
+	kfree(chip);
+	return err;
+}
+
+static int tsl2563_remove(struct i2c_client *client)
+{
+	struct tsl2563_chip *chip = i2c_get_clientdata(client);
+
+	iio_device_unregister(chip->indio_dev);
+
+	kfree(chip);
+	return 0;
+}
+
+static int tsl2563_suspend(struct i2c_client *client, pm_message_t state)
+{
+	struct tsl2563_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_set_power(chip, 0);
+	if (ret)
+		goto out;
+
+	chip->state = state;
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int tsl2563_resume(struct i2c_client *client)
+{
+	struct tsl2563_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_set_power(chip, 1);
+	if (ret)
+		goto out;
+
+	ret = tsl2563_configure(chip);
+	if (ret)
+		goto out;
+
+	chip->state.event = PM_EVENT_ON;
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static const struct i2c_device_id tsl2563_id[] = {
+	{ DRIVER_NAME, 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, tsl2563_id);
+
+static struct i2c_driver tsl2563_i2c_driver = {
+	.driver = {
+		.name	 = DRIVER_NAME,
+	},
+	.suspend	= tsl2563_suspend,
+	.resume		= tsl2563_resume,
+	.probe		= tsl2563_probe,
+	.remove		= __devexit_p(tsl2563_remove),
+	.id_table	= tsl2563_id,
+};
+
+static int __init tsl2563_init(void)
+{
+	return i2c_add_driver(&tsl2563_i2c_driver);
+}
+
+static void __exit tsl2563_exit(void)
+{
+	i2c_del_driver(&tsl2563_i2c_driver);
+}
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("tsl2563 light sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(tsl2563_init);
+module_exit(tsl2563_exit);
diff --git a/drivers/staging/iio/light/tsl2563.h b/drivers/staging/iio/light/tsl2563.h
new file mode 100644
index 0000000..b97368b
--- /dev/null
+++ b/drivers/staging/iio/light/tsl2563.h
@@ -0,0 +1,9 @@ 
+#ifndef __LINUX_TSL2563_H
+#define __LINUX_TSL2563_H
+
+struct tsl2563_platform_data {
+	int cover_comp_gain;
+};
+
+#endif /* __LINUX_TSL2563_H */
+