@@ -39,6 +39,7 @@
#include <plat/mux.h>
#include <plat/usb.h>
#include <plat/common.h>
+#include <plat/control.h>
#include <plat/mcspi.h>
#include <plat/clock.h>
#include <plat/omap-pm.h>
@@ -46,6 +47,7 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#include "pm.h"
+#include "prm-regbits-34xx.h"
#include "omap3-opp.h"
#define OMAP3_EVM_TS_GPIO 175
@@ -169,6 +171,84 @@ static struct platform_device leds_gpio = {
},
};
+#ifdef CONFIG_PM
+/*
+ * Save the state of keypad
+ *
+ * TODO: This definition should ideally be in a header file, but
+ * matrix_keypad.h is not the right one. Also, plat/keypad.h
+ * is no longer used.
+ */
+struct omap_keypad_pm_state {
+ void __iomem *wk_st;
+ void __iomem *wk_en;
+ u32 wk_mask;
+ u32 padconf;
+};
+
+/*
+ * Board specific hook for keypad suspend
+ */
+void omap3_evm_kp_suspend(void *ptr)
+{
+ struct omap_keypad_pm_state *pstate =
+ (struct omap_keypad_pm_state *)ptr;
+
+ if (pstate) {
+ /*
+ * Set wake-enable bit
+ */
+ if (pstate->wk_en && pstate->wk_mask) {
+ u32 v = __raw_readl(pstate->wk_en);
+ v |= pstate->wk_mask;
+ __raw_writel(v, pstate->wk_en);
+ }
+ /*
+ * Set corresponding IOPAD wakeup-enable
+ */
+ if (cpu_is_omap34xx() && pstate->padconf) {
+ u16 v = omap_ctrl_readw(pstate->padconf);
+ v |= OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, pstate->padconf);
+ }
+ }
+}
+
+/*
+ * Board specific hook for keypad resume
+ */
+void omap3_evm_kp_resume(void *ptr)
+{
+ struct omap_keypad_pm_state *pstate =
+ (struct omap_keypad_pm_state *)ptr;
+
+ if (pstate) {
+ /*
+ * Clear wake-enable bit
+ */
+ if (pstate->wk_en && pstate->wk_mask) {
+ u32 v = __raw_readl(pstate->wk_en);
+ v &= ~pstate->wk_mask;
+ __raw_writel(v, pstate->wk_en);
+ }
+ /*
+ * Clear corresponding IOPAD wakeup-enable
+ */
+ if (cpu_is_omap34xx() && pstate->padconf) {
+ u16 v = omap_ctrl_readw(pstate->padconf);
+ v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, pstate->padconf);
+ }
+ }
+}
+
+static struct omap_keypad_pm_state omap3evm_kp_pm_state = {
+ .wk_st = OMAP34XX_PRM_REGADDR(WKUP_MOD, PM_WKEN1),
+ .wk_en = OMAP34XX_PRM_REGADDR(WKUP_MOD, PM_WKST1),
+ .wk_mask = OMAP3430_EN_GPIO1,
+ .padconf = 0x1e0,
+};
+#endif /* CONFIG_PM */
static int omap3evm_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
@@ -236,6 +316,15 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
.rows = 4,
.cols = 4,
.rep = 1,
+#ifdef CONFIG_PM
+ .pm_state = (void *)&omap3evm_kp_pm_state,
+ .on_suspend = omap3_evm_kp_suspend,
+ .on_resume = omap3_evm_kp_resume,
+#else
+ .pm_state = NULL,
+ .on_suspend = NULL,
+ .on_resume = NULL,
+#endif /* CONFIG_PM */
};
static struct twl4030_madc_platform_data omap3evm_madc_data = {