From patchwork Fri Dec 11 22:29:00 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Greg Kroah-Hartman X-Patchwork-Id: 66785 Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id nBBMcGxY026085 for ; Fri, 11 Dec 2009 22:38:16 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934167AbZLKWiA (ORCPT ); Fri, 11 Dec 2009 17:38:00 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1761345AbZLKWiA (ORCPT ); Fri, 11 Dec 2009 17:38:00 -0500 Received: from kroah.org ([198.145.64.141]:59762 "EHLO coco.kroah.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1761399AbZLKWh6 (ORCPT ); Fri, 11 Dec 2009 17:37:58 -0500 Received: from localhost (c-98-246-45-209.hsd1.or.comcast.net [98.246.45.209]) (using TLSv1 with cipher DHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) by coco.kroah.org (Postfix) with ESMTPSA id C4129489E9; Fri, 11 Dec 2009 14:38:04 -0800 (PST) From: Greg Kroah-Hartman To: devel@driverdev.osuosl.org Cc: Amit Kucheria , Jonathan Cameron , linux-omap@vger.kernel.org, Greg Kroah-Hartman Subject: [PATCH 198/235] Staging: iio: tsl2563 ambient light sensor driver Date: Fri, 11 Dec 2009 14:29:00 -0800 Message-Id: <1260570577-8068-198-git-send-email-gregkh@suse.de> X-Mailer: git-send-email 1.6.5.3 In-Reply-To: <20091211212704.GC6624@kroah.com> References: <20091211212704.GC6624@kroah.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig index 12af0c4..cf0d0d6 100644 --- a/drivers/staging/iio/light/Kconfig +++ b/drivers/staging/iio/light/Kconfig @@ -11,3 +11,14 @@ config TSL2561 convertor. This chip has two light sensors. One is broadband including infrared whilst the other measures only infrared. Provides direct access via sysfs. + +config SENSORS_TSL2563 + tristate "TAOS TSL2563 ambient light sensor" + depends on I2C + help + If you say yes here you get support for the Taos TSL2563 + ambient light sensor (found in N900). + + This driver can also be built as a module. If so, the module + will be called tsl2563. + diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile index ccff151..30dbfb1 100644 --- a/drivers/staging/iio/light/Makefile +++ b/drivers/staging/iio/light/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_TSL2561) += tsl2561.o +obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c new file mode 100644 index 0000000..3e812b2 --- /dev/null +++ b/drivers/staging/iio/light/tsl2563.c @@ -0,0 +1,772 @@ +/* + * drivers/i2c/chips/tsl2563.c + * + * Copyright (C) 2008 Nokia Corporation + * + * Written by Timo O. Karjalainen + * Contact: Amit Kucheria + * + * Converted to IIO driver + * Amit Kucheria + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../iio.h" +#include "tsl2563.h" + +#define DRIVER_NAME "tsl2563" + +/* Use this many bits for fraction part. */ +#define ADC_FRAC_BITS (14) + +/* Given number of 1/10000's in ADC_FRAC_BITS precision. */ +#define FRAC10K(f) (((f) * (1L << (ADC_FRAC_BITS))) / (10000)) + +/* Bits used for fraction in calibration coefficients.*/ +#define CALIB_FRAC_BITS (10) +/* 0.5 in CALIB_FRAC_BITS precision */ +#define CALIB_FRAC_HALF (1 << (CALIB_FRAC_BITS - 1)) +/* Make a fraction from a number n that was multiplied with b. */ +#define CALIB_FRAC(n, b) (((n) << CALIB_FRAC_BITS) / (b)) +/* Decimal 10^(digits in sysfs presentation) */ +#define CALIB_BASE_SYSFS (1000) + +#define TSL2563_CMD (0x80) +#define TSL2563_CLEARINT (0x40) + +#define TSL2563_REG_CTRL (0x00) +#define TSL2563_REG_TIMING (0x01) +#define TSL2563_REG_LOWLOW (0x02) /* data0 low threshold, 2 bytes */ +#define TSL2563_REG_LOWHIGH (0x03) +#define TSL2563_REG_HIGHLOW (0x04) /* data0 high threshold, 2 bytes */ +#define TSL2563_REG_HIGHHIGH (0x05) +#define TSL2563_REG_INT (0x06) +#define TSL2563_REG_ID (0x0a) +#define TSL2563_REG_DATA0LOW (0x0c) /* broadband sensor value, 2 bytes */ +#define TSL2563_REG_DATA0HIGH (0x0d) +#define TSL2563_REG_DATA1LOW (0x0e) /* infrared sensor value, 2 bytes */ +#define TSL2563_REG_DATA1HIGH (0x0f) + +#define TSL2563_CMD_POWER_ON (0x03) +#define TSL2563_CMD_POWER_OFF (0x00) +#define TSL2563_CTRL_POWER_MASK (0x03) + +#define TSL2563_TIMING_13MS (0x00) +#define TSL2563_TIMING_100MS (0x01) +#define TSL2563_TIMING_400MS (0x02) +#define TSL2563_TIMING_MASK (0x03) +#define TSL2563_TIMING_GAIN16 (0x10) +#define TSL2563_TIMING_GAIN1 (0x00) + +#define TSL2563_INT_DISBLED (0x00) +#define TSL2563_INT_LEVEL (0x10) +#define TSL2563_INT_PERSIST(n) ((n) & 0x0F) + +struct tsl2563_gainlevel_coeff { + u8 gaintime; + u16 min; + u16 max; +}; + +static struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = { + { + .gaintime = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16, + .min = 0, + .max = 65534, + }, { + .gaintime = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1, + .min = 2048, + .max = 65534, + }, { + .gaintime = TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1, + .min = 4095, + .max = 37177, + }, { + .gaintime = TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1, + .min = 3000, + .max = 65535, + }, +}; + +struct tsl2563_chip { + struct mutex lock; + struct i2c_client *client; + struct iio_dev *indio_dev; + struct delayed_work poweroff_work; + + /* Remember state for suspend and resume functions */ + pm_message_t state; + + struct tsl2563_gainlevel_coeff *gainlevel; + + /* Thresholds are in lux */ + u16 low_thres; + u16 high_thres; + u8 intr; + + /* Calibration coefficients */ + u32 calib0; + u32 calib1; + int cover_comp_gain; + + /* Cache current values, to be returned while suspended */ + u32 data0; + u32 data1; +}; + +static int tsl2563_write(struct i2c_client *client, u8 reg, u8 value) +{ + int ret; + u8 buf[2]; + + buf[0] = TSL2563_CMD | reg; + buf[1] = value; + + ret = i2c_master_send(client, buf, sizeof(buf)); + return (ret == sizeof(buf)) ? 0 : ret; +} + +static int tsl2563_read(struct i2c_client *client, u8 reg, void *buf, int len) +{ + int ret; + u8 cmd = TSL2563_CMD | reg; + + ret = i2c_master_send(client, &cmd, sizeof(cmd)); + if (ret != sizeof(cmd)) + return ret; + + return i2c_master_recv(client, buf, len); +} + +static int tsl2563_set_power(struct tsl2563_chip *chip, int on) +{ + struct i2c_client *client = chip->client; + u8 cmd; + + cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF; + return tsl2563_write(client, TSL2563_REG_CTRL, cmd); +} + +/* + * Return value is 0 for off, 1 for on, or a negative error + * code if reading failed. + */ +static int tsl2563_get_power(struct tsl2563_chip *chip) +{ + struct i2c_client *client = chip->client; + int ret; + u8 val; + + ret = tsl2563_read(client, TSL2563_REG_CTRL, &val, sizeof(val)); + if (ret != sizeof(val)) + return ret; + + return (val & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON; +} + +static int tsl2563_configure(struct tsl2563_chip *chip) +{ + struct i2c_client *client = chip->client; + int ret; + + ret = tsl2563_write(client, TSL2563_REG_TIMING, + chip->gainlevel->gaintime); + if (ret) + goto out; + + ret = tsl2563_write(client, TSL2563_REG_INT, chip->intr); + +out: + return ret; +} + +static void tsl2563_poweroff_work(struct work_struct *work) +{ + struct tsl2563_chip *chip = + container_of(work, struct tsl2563_chip, poweroff_work.work); + tsl2563_set_power(chip, 0); +} + +static int tsl2563_detect(struct tsl2563_chip *chip) +{ + int ret; + + ret = tsl2563_set_power(chip, 1); + if (ret) + return ret; + + ret = tsl2563_get_power(chip); + if (ret < 0) + return ret; + + return ret ? 0 : -ENODEV; +} + +static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id) +{ + struct i2c_client *client = chip->client; + int ret; + + ret = tsl2563_read(client, TSL2563_REG_ID, id, sizeof(*id)); + if (ret != sizeof(*id)) + return ret; + + return 0; +} + +/* + * "Normalized" ADC value is one obtained with 400ms of integration time and + * 16x gain. This function returns the number of bits of shift needed to + * convert between normalized values and HW values obtained using given + * timing and gain settings. + */ +static int adc_shiftbits(u8 timing) +{ + int shift = 0; + + switch (timing & TSL2563_TIMING_MASK) { + case TSL2563_TIMING_13MS: + shift += 5; + break; + case TSL2563_TIMING_100MS: + shift += 2; + break; + case TSL2563_TIMING_400MS: + /* no-op */ + break; + } + + if (!(timing & TSL2563_TIMING_GAIN16)) + shift += 4; + + return shift; +} + +/* Convert a HW ADC value to normalized scale. */ +static u32 normalize_adc(u16 adc, u8 timing) +{ + return adc << adc_shiftbits(timing); +} + +static void tsl2563_wait_adc(struct tsl2563_chip *chip) +{ + unsigned int delay; + + switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) { + case TSL2563_TIMING_13MS: + delay = 14; + break; + case TSL2563_TIMING_100MS: + delay = 101; + break; + default: + delay = 402; + } + /* + * TODO: Make sure that we wait at least required delay but why we + * have to extend it one tick more? + */ + schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2); +} + +static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc) +{ + struct i2c_client *client = chip->client; + + if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) { + + (adc > chip->gainlevel->max) ? + chip->gainlevel++ : chip->gainlevel--; + + tsl2563_write(client, TSL2563_REG_TIMING, + chip->gainlevel->gaintime); + + tsl2563_wait_adc(chip); + tsl2563_wait_adc(chip); + + return 1; + } else + return 0; +} + +static int tsl2563_get_adc(struct tsl2563_chip *chip) +{ + struct i2c_client *client = chip->client; + u8 buf0[2], buf1[2]; + u16 adc0, adc1; + int retry = 1; + int ret = 0; + + if (chip->state.event != PM_EVENT_ON) + goto out; + + cancel_delayed_work(&chip->poweroff_work); + + if (!tsl2563_get_power(chip)) { + ret = tsl2563_set_power(chip, 1); + if (ret) + goto out; + ret = tsl2563_configure(chip); + if (ret) + goto out; + tsl2563_wait_adc(chip); + } + + while (retry) { + ret = tsl2563_read(client, + TSL2563_REG_DATA0LOW | TSL2563_CLEARINT, + buf0, sizeof(buf0)); + if (ret != sizeof(buf0)) + goto out; + + ret = tsl2563_read(client, TSL2563_REG_DATA1LOW, + buf1, sizeof(buf1)); + if (ret != sizeof(buf1)) + goto out; + + adc0 = (buf0[1] << 8) + buf0[0]; + adc1 = (buf1[1] << 8) + buf1[0]; + + retry = tsl2563_adjust_gainlevel(chip, adc0); + } + + chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime); + chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime); + + schedule_delayed_work(&chip->poweroff_work, 5 * HZ); + + ret = 0; +out: + return ret; +} + +static inline int calib_to_sysfs(u32 calib) +{ + return (int) (((calib * CALIB_BASE_SYSFS) + + CALIB_FRAC_HALF) >> CALIB_FRAC_BITS); +} + +static inline u32 calib_from_sysfs(int value) +{ + return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS; +} + +/* + * Conversions between lux and ADC values. + * + * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are + * appropriate constants. Different constants are needed for different + * kinds of light, determined by the ratio adc1/adc0 (basically the ratio + * of the intensities in infrared and visible wavelengths). lux_table below + * lists the upper threshold of the adc1/adc0 ratio and the corresponding + * constants. + */ + +struct tsl2563_lux_coeff { + unsigned long ch_ratio; + unsigned long ch0_coeff; + unsigned long ch1_coeff; +}; + +static const struct tsl2563_lux_coeff lux_table[] = { + { + .ch_ratio = FRAC10K(1300), + .ch0_coeff = FRAC10K(315), + .ch1_coeff = FRAC10K(262), + }, { + .ch_ratio = FRAC10K(2600), + .ch0_coeff = FRAC10K(337), + .ch1_coeff = FRAC10K(430), + }, { + .ch_ratio = FRAC10K(3900), + .ch0_coeff = FRAC10K(363), + .ch1_coeff = FRAC10K(529), + }, { + .ch_ratio = FRAC10K(5200), + .ch0_coeff = FRAC10K(392), + .ch1_coeff = FRAC10K(605), + }, { + .ch_ratio = FRAC10K(6500), + .ch0_coeff = FRAC10K(229), + .ch1_coeff = FRAC10K(291), + }, { + .ch_ratio = FRAC10K(8000), + .ch0_coeff = FRAC10K(157), + .ch1_coeff = FRAC10K(180), + }, { + .ch_ratio = FRAC10K(13000), + .ch0_coeff = FRAC10K(34), + .ch1_coeff = FRAC10K(26), + }, { + .ch_ratio = ULONG_MAX, + .ch0_coeff = 0, + .ch1_coeff = 0, + }, +}; + +/* + * Convert normalized, scaled ADC values to lux. + */ +static unsigned int adc_to_lux(u32 adc0, u32 adc1) +{ + const struct tsl2563_lux_coeff *lp = lux_table; + unsigned long ratio, lux, ch0 = adc0, ch1 = adc1; + + ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX; + + while (lp->ch_ratio < ratio) + lp++; + + lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff; + + return (unsigned int) (lux >> ADC_FRAC_BITS); +} + +/*--------------------------------------------------------------*/ +/* Sysfs interface */ +/*--------------------------------------------------------------*/ + +static ssize_t tsl2563_adc0_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2563_chip *chip = indio_dev->dev_data; + int ret; + + mutex_lock(&chip->lock); + + ret = tsl2563_get_adc(chip); + if (ret) + goto out; + + ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data0); +out: + mutex_unlock(&chip->lock); + return ret; +} + +static ssize_t tsl2563_adc1_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2563_chip *chip = indio_dev->dev_data; + int ret; + + mutex_lock(&chip->lock); + + ret = tsl2563_get_adc(chip); + if (ret) + goto out; + + ret = snprintf(buf, PAGE_SIZE, "%d\n", chip->data1); +out: + mutex_unlock(&chip->lock); + return ret; +} + +/* Apply calibration coefficient to ADC count. */ +static u32 calib_adc(u32 adc, u32 calib) +{ + unsigned long scaled = adc; + + scaled *= calib; + scaled >>= CALIB_FRAC_BITS; + + return (u32) scaled; +} + +static ssize_t tsl2563_lux_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2563_chip *chip = indio_dev->dev_data; + u32 calib0, calib1; + int ret; + + mutex_lock(&chip->lock); + + ret = tsl2563_get_adc(chip); + if (ret) + goto out; + + calib0 = calib_adc(chip->data0, chip->calib0) * chip->cover_comp_gain; + calib1 = calib_adc(chip->data1, chip->calib1) * chip->cover_comp_gain; + + ret = snprintf(buf, PAGE_SIZE, "%d\n", adc_to_lux(calib0, calib1)); + +out: + mutex_unlock(&chip->lock); + return ret; +} + +static ssize_t format_calib(char *buf, int len, u32 calib) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", calib_to_sysfs(calib)); +} + +static ssize_t tsl2563_calib0_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2563_chip *chip = indio_dev->dev_data; + int ret; + + mutex_lock(&chip->lock); + ret = format_calib(buf, PAGE_SIZE, chip->calib0); + mutex_unlock(&chip->lock); + return ret; +} + +static ssize_t tsl2563_calib1_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2563_chip *chip = indio_dev->dev_data; + int ret; + + mutex_lock(&chip->lock); + ret = format_calib(buf, PAGE_SIZE, chip->calib1); + mutex_unlock(&chip->lock); + return ret; +} + +static int do_calib_store(struct device *dev, const char *buf, size_t len, + int ch) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct tsl2563_chip *chip = indio_dev->dev_data; + int value; + u32 calib; + + if (1 != sscanf(buf, "%d", &value)) + return -EINVAL; + + calib = calib_from_sysfs(value); + + if (ch) + chip->calib1 = calib; + else + chip->calib0 = calib; + + return len; +} + +static ssize_t tsl2563_calib0_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + return do_calib_store(dev, buf, len, 0); +} + +static ssize_t tsl2563_calib1_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + return do_calib_store(dev, buf, len, 1); +} + +/* AmitXXXX: Convert to IIO_DEV_ATTR_LIGHT* as in tsl2561 + * once I understand what they mean */ +static DEVICE_ATTR(adc0, S_IRUGO, tsl2563_adc0_show, NULL); +static DEVICE_ATTR(adc1, S_IRUGO, tsl2563_adc1_show, NULL); +static DEVICE_ATTR(lux, S_IRUGO, tsl2563_lux_show, NULL); +static DEVICE_ATTR(calib0, S_IRUGO | S_IWUSR, + tsl2563_calib0_show, tsl2563_calib0_store); +static DEVICE_ATTR(calib1, S_IRUGO | S_IWUSR, + tsl2563_calib1_show, tsl2563_calib1_store); + +static struct attribute *tsl2563_attributes[] = { + &dev_attr_adc0.attr, + &dev_attr_adc1.attr, + &dev_attr_lux.attr, + &dev_attr_calib0.attr, + &dev_attr_calib1.attr, + NULL +}; + +static const struct attribute_group tsl2563_group = { + .attrs = tsl2563_attributes, +}; + +/*--------------------------------------------------------------*/ +/* Probe, Attach, Remove */ +/*--------------------------------------------------------------*/ +static struct i2c_driver tsl2563_i2c_driver; + +static int __devinit tsl2563_probe(struct i2c_client *client, + const struct i2c_device_id *device_id) +{ + struct tsl2563_chip *chip; + struct tsl2563_platform_data *pdata = client->dev.platform_data; + int err = 0; + int ret; + u8 id; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + i2c_set_clientdata(client, chip); + chip->client = client; + + err = tsl2563_detect(chip); + if (err) { + dev_err(&client->dev, "device not found, error %d \n", -err); + goto fail1; + } + + err = tsl2563_read_id(chip, &id); + if (err) + goto fail1; + + mutex_init(&chip->lock); + + /* Default values used until userspace says otherwise */ + chip->low_thres = 0x0; + chip->high_thres = 0xffff; + chip->gainlevel = tsl2563_gainlevel_table; + chip->intr = TSL2563_INT_PERSIST(4); + chip->calib0 = calib_from_sysfs(CALIB_BASE_SYSFS); + chip->calib1 = calib_from_sysfs(CALIB_BASE_SYSFS); + + if (pdata) + chip->cover_comp_gain = pdata->cover_comp_gain; + else + chip->cover_comp_gain = 1; + + dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f); + + chip->indio_dev = iio_allocate_device(); + if (!chip->indio_dev) + goto fail1; + chip->indio_dev->attrs = &tsl2563_group; + chip->indio_dev->dev.parent = &client->dev; + chip->indio_dev->dev_data = (void *)(chip); + chip->indio_dev->driver_module = THIS_MODULE; + chip->indio_dev->modes = INDIO_DIRECT_MODE; + ret = iio_device_register(chip->indio_dev); + if (ret) + goto fail1; + + err = tsl2563_configure(chip); + if (err) + goto fail2; + + INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work); + schedule_delayed_work(&chip->poweroff_work, 5 * HZ); + + return 0; +fail2: + iio_device_unregister(chip->indio_dev); +fail1: + kfree(chip); + return err; +} + +static int tsl2563_remove(struct i2c_client *client) +{ + struct tsl2563_chip *chip = i2c_get_clientdata(client); + + iio_device_unregister(chip->indio_dev); + + kfree(chip); + return 0; +} + +static int tsl2563_suspend(struct i2c_client *client, pm_message_t state) +{ + struct tsl2563_chip *chip = i2c_get_clientdata(client); + int ret; + + mutex_lock(&chip->lock); + + ret = tsl2563_set_power(chip, 0); + if (ret) + goto out; + + chip->state = state; + +out: + mutex_unlock(&chip->lock); + return ret; +} + +static int tsl2563_resume(struct i2c_client *client) +{ + struct tsl2563_chip *chip = i2c_get_clientdata(client); + int ret; + + mutex_lock(&chip->lock); + + ret = tsl2563_set_power(chip, 1); + if (ret) + goto out; + + ret = tsl2563_configure(chip); + if (ret) + goto out; + + chip->state.event = PM_EVENT_ON; + +out: + mutex_unlock(&chip->lock); + return ret; +} + +static const struct i2c_device_id tsl2563_id[] = { + { DRIVER_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, tsl2563_id); + +static struct i2c_driver tsl2563_i2c_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .suspend = tsl2563_suspend, + .resume = tsl2563_resume, + .probe = tsl2563_probe, + .remove = __devexit_p(tsl2563_remove), + .id_table = tsl2563_id, +}; + +static int __init tsl2563_init(void) +{ + return i2c_add_driver(&tsl2563_i2c_driver); +} + +static void __exit tsl2563_exit(void) +{ + i2c_del_driver(&tsl2563_i2c_driver); +} + +MODULE_AUTHOR("Nokia Corporation"); +MODULE_DESCRIPTION("tsl2563 light sensor driver"); +MODULE_LICENSE("GPL"); + +module_init(tsl2563_init); +module_exit(tsl2563_exit); diff --git a/drivers/staging/iio/light/tsl2563.h b/drivers/staging/iio/light/tsl2563.h new file mode 100644 index 0000000..b97368b --- /dev/null +++ b/drivers/staging/iio/light/tsl2563.h @@ -0,0 +1,9 @@ +#ifndef __LINUX_TSL2563_H +#define __LINUX_TSL2563_H + +struct tsl2563_platform_data { + int cover_comp_gain; +}; + +#endif /* __LINUX_TSL2563_H */ +