Index: felipe_musb/arch/arm/mach-omap2/board-2430sdp.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-2430sdp.c
+++ felipe_musb/arch/arm/mach-omap2/board-2430sdp.c
@@ -195,6 +195,12 @@ static struct twl4030_hsmmc_info mmc[] _
 	{}	/* Terminator */
 };
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+}
+
 static void __init omap_2430sdp_init(void)
 {
 	int ret;
@@ -204,7 +210,7 @@ static void __init omap_2430sdp_init(voi
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
 
 	/* Turn off secondary LCD backlight */
Index: felipe_musb/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-3430sdp.c
+++ felipe_musb/arch/arm/mach-omap2/board-3430sdp.c
@@ -651,6 +651,12 @@ static struct omap_board_mux board_mux[]
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -665,7 +671,7 @@ static void __init omap_3430sdp_init(voi
 				ARRAY_SIZE(sdp3430_spi_board_info));
 	ads7846_dev_init();
 	omap_serial_init();
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
 	sdp3430_display_init();
 	enable_board_wakeup_source();
Index: felipe_musb/arch/arm/mach-omap2/board-cm-t35.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-cm-t35.c
+++ felipe_musb/arch/arm/mach-omap2/board-cm-t35.c
@@ -576,6 +576,12 @@ static struct omap_board_mux board_mux[]
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init cm_t35_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
@@ -586,7 +592,7 @@ static void __init cm_t35_init(void)
 	cm_t35_init_ethernet();
 	cm_t35_init_led();
 
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
Index: felipe_musb/arch/arm/mach-omap2/board-igep0020.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-igep0020.c
+++ felipe_musb/arch/arm/mach-omap2/board-igep0020.c
@@ -212,12 +212,18 @@ static struct omap_board_mux board_mux[]
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data  = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init igep2_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	igep2_i2c_init();
 	omap_serial_init();
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 
 	igep2_init_smsc911x();
 
Index: felipe_musb/arch/arm/mach-omap2/board-ldp.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-ldp.c
+++ felipe_musb/arch/arm/mach-omap2/board-ldp.c
@@ -384,6 +384,12 @@ static struct omap_board_mux board_mux[]
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -395,7 +401,7 @@ static void __init omap_ldp_init(void)
 				ARRAY_SIZE(ldp_spi_board_info));
 	ads7846_dev_init();
 	omap_serial_init();
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 
 	twl4030_mmc_init(mmc);
 	/* link regulators to MMC adapters */
Index: felipe_musb/arch/arm/mach-omap2/board-omap3beagle.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3beagle.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3beagle.c
@@ -431,6 +431,12 @@ static struct omap_board_mux board_mux[]
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3_beagle_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -444,7 +450,7 @@ static void __init omap3_beagle_init(voi
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);
 
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	omap3beagle_flash_init();
 
Index: felipe_musb/arch/arm/mach-omap2/board-omap3evm.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3evm.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3evm.c
@@ -431,6 +431,12 @@ static struct omap_board_mux board_mux[]
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3_evm_init(void)
 {
 	omap3_evm_get_revision();
@@ -470,7 +476,7 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		ehci_pdata.reset_gpio_port[1] = 135;
 	}
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	ads7846_dev_init();
 	omap3evm_init_smsc911x();
Index: felipe_musb/arch/arm/mach-omap2/board-omap3pandora.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3pandora.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3pandora.c
@@ -402,6 +402,12 @@ static struct omap_board_mux board_mux[]
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -414,7 +420,7 @@ static void __init omap3pandora_init(voi
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
 	pandora_keys_gpio_init();
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
Index: felipe_musb/arch/arm/mach-omap2/board-omap3touchbook.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-omap3touchbook.c
+++ felipe_musb/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -528,6 +528,12 @@ static void __init early_touchbook_revis
 }
 __early_param("tbr=", early_touchbook_revision);
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init omap3_touchbook_init(void)
 {
 	pm_power_off = omap3_touchbook_poweroff;
@@ -546,7 +552,7 @@ static void __init omap3_touchbook_init(
 	spi_register_board_info(omap3_ads7846_spi_board_info,
 				ARRAY_SIZE(omap3_ads7846_spi_board_info));
 	omap3_ads7846_init();
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	omap3touchbook_flash_init();
 
Index: felipe_musb/arch/arm/mach-omap2/board-overo.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-overo.c
+++ felipe_musb/arch/arm/mach-omap2/board-overo.c
@@ -414,6 +414,12 @@ static struct omap_board_mux board_mux[]
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 static void __init overo_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -421,7 +427,7 @@ static void __init overo_init(void)
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
 	omap_serial_init();
 	overo_flash_init();
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 	usb_ehci_init(&ehci_pdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
Index: felipe_musb/arch/arm/mach-omap2/board-rx51.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-rx51.c
+++ felipe_musb/arch/arm/mach-omap2/board-rx51.c
@@ -79,11 +79,17 @@ static struct omap_board_mux board_mux[]
 #define board_mux	NULL
 #endif
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_PERIPHERAL,
+	.power			= 0,
+};
+
 static void __init rx51_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
-	usb_musb_init(MUSB_PERIPHERAL, 0);
+	usb_musb_init(&musb_board_data);
 	rx51_peripherals_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
Index: felipe_musb/arch/arm/mach-omap2/board-zoom-peripherals.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ felipe_musb/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -264,9 +264,15 @@ static int __init omap_i2c_init(void)
 	return 0;
 }
 
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_ULPI,
+	.mode			= MUSB_OTG,
+	.power			= 100,
+};
+
 void __init zoom_peripherals_init(void)
 {
 	omap_i2c_init();
 	omap_serial_init();
-	usb_musb_init(MUSB_OTG, 100);
+	usb_musb_init(&musb_board_data);
 }
Index: felipe_musb/arch/arm/mach-omap2/usb-musb.c
===================================================================
--- felipe_musb.orig/arch/arm/mach-omap2/usb-musb.c
+++ felipe_musb/arch/arm/mach-omap2/usb-musb.c
@@ -75,7 +75,7 @@ static struct platform_device musb_devic
 	.resource	= musb_resources,
 };
 
-void __init usb_musb_init(enum musb_mode mode, unsigned power)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
 {
 	if (cpu_is_omap243x())
 		musb_resources[0].start = OMAP243X_HS_BASE;
@@ -88,15 +88,16 @@ void __init usb_musb_init(enum musb_mode
 	 * musb_core.c have been converted to use use clkdev.
 	 */
 	musb_plat.clock = "ick";
-	musb_plat.power = power >> 1;
-	musb_plat.mode = mode;
+	musb_plat.board_data = board_data;
+	musb_plat.power = board_data->power >> 1;
+	musb_plat.mode = board_data->mode;
 
 	if (platform_device_register(&musb_device) < 0)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
 }
 
 #else
-void __init usb_musb_init(enum musb_mode mode, unsigned power)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
 {
 }
 #endif /* CONFIG_USB_MUSB_SOC */
Index: felipe_musb/arch/arm/plat-omap/include/plat/usb.h
===================================================================
--- felipe_musb.orig/arch/arm/plat-omap/include/plat/usb.h
+++ felipe_musb/arch/arm/plat-omap/include/plat/usb.h
@@ -43,7 +43,15 @@ struct ehci_hcd_omap_platform_data {
 #define UDC_BASE			OMAP2_UDC_BASE
 #define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
 
-extern void usb_musb_init(enum musb_mode mode, unsigned power);
+struct omap_musb_board_data {
+	u8	interface_type;
+	u8	mode;
+	u8	power;
+};
+
+enum musb_interface	{MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
 
 extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
 
Index: felipe_musb/include/linux/usb/musb.h
===================================================================
--- felipe_musb.orig/include/linux/usb/musb.h
+++ felipe_musb/include/linux/usb/musb.h
@@ -84,6 +84,9 @@ struct musb_hdrc_platform_data {
 
 	/* MUSB configuration-specific details */
 	struct musb_hdrc_config	*config;
+
+	/* Architecture specific board data	*/
+	void		*board_data;
 };
 
 
