[v3,1/3] omap3: add platform init code for OHCI driver

Message ID	1272256489-3389-2-git-send-email-gadiyar@ti.com (mailing list archive)
State	Accepted, archived
Headers	show Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter.kernel.org (8.14.3/8.14.3) with ESMTP id o3Q4ZJbG008654 for <patchwork-omap@patchwork.kernel.org>; Mon, 26 Apr 2010 04:35:19 GMT From: Anand Gadiyar <gadiyar@ti.com> To: linux-usb@vger.kernel.org, linux-omap@vger.kernel.org, Greg KH <gregkh@suse.de> Cc: Anand Gadiyar <gadiyar@ti.com>, David Brownell <dbrownell@users.sourceforge.net> Subject: [PATCH v3 1/3] omap3: add platform init code for OHCI driver Date: Mon, 26 Apr 2010 10:04:47 +0530 Message-Id: <1272256489-3389-2-git-send-email-gadiyar@ti.com> In-Reply-To: <1272256489-3389-1-git-send-email-gadiyar@ti.com> References: <1272256489-3389-1-git-send-email-gadiyar@ti.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk

Index: linux-2.6/arch/arm/mach-omap2/usb-ehci.c =================================================================== --- linux-2.6.orig/arch/arm/mach-omap2/usb-ehci.c +++ linux-2.6/arch/arm/mach-omap2/usb-ehci.c @@ -236,3 +236,158 @@ void __init usb_ehci_init(const struct e #endif /* CONFIG_USB_EHCI_HCD */ +#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + +static struct resource ohci_resources[] = { + { + .start = OMAP34XX_OHCI_BASE, + .end = OMAP34XX_OHCI_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP34XX_UHH_CONFIG_BASE, + .end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = OMAP34XX_USBTLL_BASE, + .end = OMAP34XX_USBTLL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* general IRQ */ + .start = INT_34XX_OHCI_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 ohci_dmamask = DMA_BIT_MASK(32); + +static struct platform_device ohci_device = { + .name = "ohci-omap3", + .id = 0, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode) +{ + switch (port_mode[0]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("mm1_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm1_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("mm1_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("mm1_txse0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm1_txdat", + OMAP_PIN_INPUT_PULLDOWN); + break; + case OMAP_OHCI_PORT_MODE_UNUSED: + /* FALLTHROUGH */ + default: + break; + } + switch (port_mode[1]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("mm2_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm2_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("mm2_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("mm2_txse0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm2_txdat", + OMAP_PIN_INPUT_PULLDOWN); + break; + case OMAP_OHCI_PORT_MODE_UNUSED: + /* FALLTHROUGH */ + default: + break; + } + switch (port_mode[2]) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + omap_mux_init_signal("mm3_rxdp", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm3_rxdm", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + omap_mux_init_signal("mm3_rxrcv", + OMAP_PIN_INPUT_PULLDOWN); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT); + /* FALLTHROUGH */ + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + omap_mux_init_signal("mm3_txse0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("mm3_txdat", + OMAP_PIN_INPUT_PULLDOWN); + break; + case OMAP_OHCI_PORT_MODE_UNUSED: + /* FALLTHROUGH */ + default: + break; + } +} + +void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +{ + platform_device_add_data(&ohci_device, pdata, sizeof(*pdata)); + + /* Setup Pin IO MUX for OHCI */ + if (cpu_is_omap34xx()) + setup_ohci_io_mux(pdata->port_mode); + + if (platform_device_register(&ohci_device) < 0) { + pr_err("Unable to register FS-USB (OHCI) device\n"); + return; + } +} + +#else + +void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata) +{ +} + +#endif /* CONFIG_USB_OHCI_HCD */ Index: linux-2.6/arch/arm/plat-omap/include/plat/usb.h =================================================================== --- linux-2.6.orig/arch/arm/plat-omap/include/plat/usb.h +++ linux-2.6/arch/arm/plat-omap/include/plat/usb.h @@ -13,6 +13,20 @@ enum ehci_hcd_omap_mode { EHCI_HCD_OMAP_MODE_TLL, }; +enum ohci_omap3_port_mode { + OMAP_OHCI_PORT_MODE_UNUSED, + OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, + OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, + OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, + OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM, +}; + struct ehci_hcd_omap_platform_data { enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; unsigned phy_reset:1; @@ -21,6 +35,13 @@ struct ehci_hcd_omap_platform_data { int reset_gpio_port[OMAP3_HS_USB_PORTS]; }; +struct ohci_hcd_omap_platform_data { + enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + /* Set this to true for ES2.x silicon */ + unsigned es2_compatibility:1; +}; + /*-------------------------------------------------------------------------*/ #define OMAP1_OTG_BASE 0xfffb0400 @@ -55,6 +76,8 @@ extern void usb_musb_init(struct omap_mu extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata); +extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata); + #endif void omap_usb_init(struct omap_usb_config *pdata);

[v3,1/3] omap3: add platform init code for OHCI driver

Commit Message

Patch