@@ -1809,6 +1809,8 @@ and is between 256 and 4096 characters. It is defined in the file
waiting for the ACK, so if this is set too high
interrupts *may* be lost!
+ omap3_die_id [OMAP] Append DIE ID info under /proc/socinfo
+
omap_mux= [OMAP] Override bootloader pin multiplexing.
Format: <mux_mode0.mode_name=value>...
For example, to override I2C bus2:
@@ -169,3 +169,13 @@ config OMAP3_SDRC_AC_TIMING
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
+config OMAP3_EXPORT_DIE_ID
+ bool "Export DIE ID code under /proc/socinfo"
+ depends on ARCH_OMAP3
+ default n
+ help
+ Say Y here if you need DIE ID code to be exported via /proc/socinfo
+ in production systems. You will need also to explicitly flag it by
+ appending the "omap3_die_id" parameter to your boot command line.
+
+
@@ -77,6 +77,10 @@ EXPORT_SYMBOL(omap_type);
/*----------------------------------------------------------------------------*/
#define OMAP_TAP_IDCODE 0x0204
+#define OMAP_TAP_PROD_ID_0 0x0208
+#define OMAP_TAP_PROD_ID_1 0x020c
+#define OMAP_TAP_PROD_ID_2 0x0210
+#define OMAP_TAP_PROD_ID_3 0x0214
#define OMAP_TAP_DIE_ID_0 0x0218
#define OMAP_TAP_DIE_ID_1 0x021C
#define OMAP_TAP_DIE_ID_2 0x0220
@@ -305,6 +309,7 @@ void __init omap4_check_revision(void)
void __init omap3_cpuinfo(void)
{
+ int sz;
u8 rev = GET_OMAP_REVISION();
char cpu_name[16], cpu_rev[16];
@@ -362,7 +367,7 @@ void __init omap3_cpuinfo(void)
}
/* Print verbose information */
- snprintf(socinfo, SOCINFO_SZ, "%s ES%s", cpu_name, cpu_rev);
+ sz = snprintf(socinfo, SOCINFO_SZ, "%s ES%s", cpu_name, cpu_rev);
pr_info("%s (", socinfo);
OMAP3_SHOW_FEATURE(l2cache);
@@ -373,7 +378,35 @@ void __init omap3_cpuinfo(void)
OMAP3_SHOW_FEATURE(192mhz_clk);
printk(")\n");
+
+ /* Append OMAP3 IDCODE and Production ID to system_soc_info */
+ snprintf(socinfo + sz, SOCINFO_SZ - sz,
+ "\nIDCODE\t: %08x\nPr. ID\t: %08x %08x %08x %08x",
+ read_tap_reg(OMAP_TAP_IDCODE),
+ read_tap_reg(OMAP_TAP_PROD_ID_0),
+ read_tap_reg(OMAP_TAP_PROD_ID_1),
+ read_tap_reg(OMAP_TAP_PROD_ID_2),
+ read_tap_reg(OMAP_TAP_PROD_ID_3));
+
+}
+
+#ifdef CONFIG_OMAP3_EXPORT_DIE_ID
+static int __init omap3_die_id_setup(char *s)
+{
+ int sz;
+
+ sz = strlen(socinfo);
+ snprintf(socinfo + sz, SOCINFO_SZ - sz,
+ "\nDie ID\t: %08x %08x %08x %08x",
+ read_tap_reg(OMAP_TAP_DIE_ID_0),
+ read_tap_reg(OMAP_TAP_DIE_ID_1),
+ read_tap_reg(OMAP_TAP_DIE_ID_2),
+ read_tap_reg(OMAP_TAP_DIE_ID_3));
+
+ return 1;
}
+__setup("omap3_die_id", omap3_die_id_setup);
+#endif
/*
* Try to detect the exact revision of the omap we're running on