diff mbox

[v2,1/4] omap3: nand: prefetch in irq mode support

Message ID 1277980935-24070-2-git-send-email-s-ghorai@ti.com (mailing list archive)
State New, archived
Delegated to: Tony Lindgren
Headers show

Commit Message

Sukumar Ghorai July 1, 2010, 10:42 a.m. UTC
None
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index ac834aa..c6a07dd 100755
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -133,6 +133,7 @@  static struct omap_nand_platform_data board_nand_data = {
 	.nand_setup	= NULL,
 	.gpmc_t		= &nand_timings,
 	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.gpmc_irq	= GPMC_IRQ_NUMBER,
 	.dev_ready	= NULL,
 	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
 };
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index b8077c6..4e12a9f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -465,6 +465,13 @@  int gpmc_hwcontrol(int cs, int cmd, int write, int wval, int *rval)
 			*rval = gpmc_read_reg(GPMC_IRQSTATUS);
 		break;
 
+	case GPMC_ENABLE_IRQ:
+		if (write)
+			gpmc_write_reg(GPMC_IRQENABLE, wval);
+		else
+			*rval = gpmc_read_reg(GPMC_IRQENABLE);
+		break;
+
 	case GPMC_PREFETCH_FIFO_CNT:
 		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
 		*rval = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
diff --git a/arch/arm/mach-omap2/include/mach/board-flash.h b/arch/arm/mach-omap2/include/mach/board-flash.h
index b2242ae..37567a7 100644
--- a/arch/arm/mach-omap2/include/mach/board-flash.h
+++ b/arch/arm/mach-omap2/include/mach/board-flash.h
@@ -19,6 +19,9 @@ 
 #define PDC_ONENAND	3
 #define DBG_MPDB	4
 
+/* Interrupt number to the MPU Subsystem for GPMC */
+#define GPMC_IRQ_NUMBER	20
+
 struct flash_partitions {
 	struct mtd_partition *parts;
 	int nr_parts;
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index ccbc530..4bdd851 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -37,6 +37,7 @@ 
 #define GPMC_PREFETCH_FIFO_CNT	0x00000009 /* bytes available in FIFO for r/w */
 #define GPMC_PREFETCH_COUNT	0x0000000A /* remaining bytes to be read/write*/
 #define GPMC_GET_SET_IRQ_STATUS	0x0000000B
+#define GPMC_ENABLE_IRQ		0x0000000C
 
 /* ECC commands */
 #define GPMC_ECC_READ		0 /* Reset Hardware ECC for read */
@@ -75,6 +76,8 @@ 
 #define WR_RD_PIN_MONITORING		0x00600000
 #define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
 #define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define GPMC_IRQ_FIFOEVENTENABLE	0x01
+#define GPMC_IRQ_COUNT_EVENT		0x02
 
 /*
  * Note that all values in this struct are in nanoseconds, while
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 6562cd0..5e69463 100644
--- a/arch/arm/plat-omap/include/plat/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -20,6 +20,7 @@  struct omap_nand_platform_data {
 	int			(*nand_setup)(void);
 	int			(*dev_ready)(struct omap_nand_platform_data *);
 	int			dma_channel;
+	int			gpmc_irq;
 	unsigned long		phys_base;
 	int			devsize;
 };
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 98a04b3..d0e934b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -111,6 +111,9 @@  config MTD_NAND_OMAP_PREFETCH
 	help
 	 The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
 	 to improve the performance.
+	 GPMC PREFETCH can be configured eigther in MPU interrupt mode or in DMA
+	 interrupt mode. If not selected any of them prefetch will be used in
+	 polling mode.
 
 config MTD_NAND_OMAP_PREFETCH_DMA
 	depends on MTD_NAND_OMAP_PREFETCH
@@ -119,7 +122,16 @@  config MTD_NAND_OMAP_PREFETCH_DMA
 	help
 	 The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
 	 or in DMA interrupt mode.
-	 Say y for DMA mode or MPU mode will be used
+	 Say y for DMA mode
+
+config MTD_NAND_OMAP_PREFETCH_IRQ
+	depends on MTD_NAND_OMAP_PREFETCH && !MTD_NAND_OMAP_PREFETCH_DMA
+	bool "IRQ mode"
+	default n
+	help
+	 The GPMC PREFETCH engine can be configured eigther in MPU interrupt mode
+	 or in DMA interrupt mode.
+	 Say y for IRQ mode
 
 config MTD_NAND_IDS
 	tristate
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f9fa3cb..2ce2410 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -12,6 +12,7 @@ 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/sched.h>
 #include <linux/mtd/mtd.h>
@@ -105,17 +106,27 @@  module_param(use_prefetch, bool, 0);
 MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
 
 #ifdef CONFIG_MTD_NAND_OMAP_PREFETCH_DMA
+const int use_interrupt;
 static int use_dma = 1;
 
 /* "modprobe ... use_dma=0" etc */
 module_param(use_dma, bool, 0);
-MODULE_PARM_DESC(use_dma, "enable/disable use of DMA");
+MODULE_PARM_DESC(use_dma, "enable/disable use of DMA mode");
+#elif defined(CONFIG_MTD_NAND_OMAP_PREFETCH_IRQ)
+const int use_dma;
+static int use_interrupt = 1;
+
+/* "modprobe ... use_dma=0" etc */
+module_param(use_interrupt, bool, 0);
+MODULE_PARM_DESC(use_interrupt, "enable/disable use of IRQ mode");
 #else
 const int use_dma;
+const int use_interrupt;
 #endif
 #else
 const int use_prefetch;
 const int use_dma;
+const int use_interrupt;
 #endif
 
 struct omap_nand_info {
@@ -130,6 +141,13 @@  struct omap_nand_info {
 	unsigned long			phys_base;
 	struct completion		comp;
 	int				dma_ch;
+	int				gpmc_irq;
+	enum {
+		NAND_IO_READ = 0,	/* read */
+		NAND_IO_WRITE,		/* write */
+	} iomode;
+	u_char				*buf;
+	int					buf_len;
 };
 
 /**
@@ -476,6 +494,155 @@  static void omap_write_buf_dma_pref(struct mtd_info *mtd,
 		omap_nand_dma_transfer(mtd, (u_char *) buf, len, 0x1);
 }
 
+/*
+ * omap_nand_irq - GMPC irq handler
+ * @this_irq: gpmc irq number
+ * @dev: omap_nand_info structure pointer is passed here
+ */
+static irqreturn_t omap_nand_irq(int this_irq, void *dev)
+{
+	struct omap_nand_info *info = (struct omap_nand_info *) dev;
+	u32 irq_enb, bytes;
+	u32 irq_stat;
+
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_GET_SET_IRQ_STATUS, 0, 0, &irq_stat);
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_PREFETCH_FIFO_CNT, 0, 0, &bytes);
+	bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
+	if (info->iomode == NAND_IO_WRITE) { /* checks for write operaiton */
+		if (irq_stat & 0x2)
+			goto done;
+
+		if (info->buf_len & (info->buf_len < bytes))
+			bytes = info->buf_len;
+		else if (!info->buf_len)
+			bytes = 0;
+		iowrite32_rep(info->nand.IO_ADDR_W,
+						(u32 *)info->buf, bytes >> 2);
+		info->buf = info->buf + bytes;
+		info->buf_len -= bytes;
+
+	} else {
+		ioread32_rep(info->nand.IO_ADDR_R,
+						(u32 *)info->buf, bytes >> 2);
+		info->buf = info->buf + bytes;
+
+		if (irq_stat & 0x2)
+			goto done;
+	}
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_GET_SET_IRQ_STATUS, 1, irq_stat, 0);
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_GET_SET_IRQ_STATUS, 0, 0, &irq_stat);
+
+	return IRQ_HANDLED;
+
+done:
+	complete(&info->comp);
+	/* disable irq */
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_ENABLE_IRQ, 0, 0, &irq_enb);
+	irq_enb &= ~(GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT);
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_ENABLE_IRQ, 1, irq_enb, 0);
+
+	/* clear status */
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_GET_SET_IRQ_STATUS, 1, irq_stat, 0);
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_GET_SET_IRQ_STATUS, 0, 0, &irq_stat);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * omap_read_buf_irq_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	u32 irq_enb;
+	int ret = 0;
+
+	if (len <= mtd->oobsize) {
+		omap_read_buf_pref(mtd, buf, len);
+		return;
+	}
+	info->iomode = NAND_IO_READ;
+	info->buf = buf;
+	init_completion(&info->comp);
+
+	/*  configure and start prefetch transfer */
+	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+	if (ret)
+		/* PFPW engine is busy, use cpu copy methode */
+		goto out_copy;
+
+	info->buf_len = len;
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_ENABLE_IRQ, 0, 0, &irq_enb);
+	irq_enb |= (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT);
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_ENABLE_IRQ, 1, irq_enb, 0);
+
+	/* waiting for read to complete */
+	wait_for_completion(&info->comp);
+	/* disable and stop the PFPW engine */
+	gpmc_prefetch_reset(info->gpmc_cs);
+	return;
+
+out_copy:
+	if (info->nand.options & NAND_BUSWIDTH_16)
+		omap_read_buf16(mtd, buf, len);
+	else
+		omap_read_buf8(mtd, buf, len);
+}
+
+/*
+ * omap_write_buf_irq_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_irq_pref(struct mtd_info *mtd,
+					const u_char *buf, int len)
+{
+	struct omap_nand_info *info = container_of(mtd,
+						struct omap_nand_info, mtd);
+	u32 irq_enb;
+	int ret = 0;
+	if (len <= mtd->oobsize) {
+		omap_write_buf_pref(mtd, buf, len);
+		return;
+	}
+
+	info->iomode = NAND_IO_WRITE;
+	info->buf = (u_char *) buf;
+	init_completion(&info->comp);
+
+	/*  configure and start prefetch transfer */
+	ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+	if (ret)
+		/* PFPW engine is busy, use cpu copy methode */
+		goto out_copy;
+
+	info->buf_len = len;
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_ENABLE_IRQ, 0, 0, &irq_enb);
+	irq_enb |= (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT);
+	gpmc_hwcontrol(info->gpmc_cs, GPMC_ENABLE_IRQ, 1, irq_enb, 0);
+
+	/* waiting for write to complete */
+	wait_for_completion(&info->comp);
+	/* wait for data to flushed-out before reset the prefetch */
+	do {
+		gpmc_hwcontrol(info->gpmc_cs, GPMC_PREFETCH_COUNT, 0, 0, &ret);
+	} while (ret);
+	/* disable and stop the PFPW engine */
+	gpmc_prefetch_reset(info->gpmc_cs);
+	return;
+
+out_copy:
+	if (info->nand.options & NAND_BUSWIDTH_16)
+		omap_write_buf16(mtd, buf, len);
+	else
+		omap_write_buf8(mtd, buf, len);
+}
+
 /**
  * omap_verify_buf - Verify chip data against buffer
  * @mtd: MTD device structure
@@ -811,6 +978,7 @@  static int __devinit omap_nand_probe(struct platform_device *pdev)
 
 	info->gpmc_cs		= pdata->cs;
 	info->phys_base		= pdata->phys_base;
+	info->gpmc_irq		= pdata->gpmc_irq;
 
 	info->mtd.priv		= &info->nand;
 	info->mtd.name		= dev_name(&pdev->dev);
@@ -874,7 +1042,20 @@  static int __devinit omap_nand_probe(struct platform_device *pdev)
 				info->nand.read_buf   = omap_read_buf_dma_pref;
 				info->nand.write_buf  = omap_write_buf_dma_pref;
 			}
+		} else if (use_interrupt) {
+			err = request_irq(info->gpmc_irq, omap_nand_irq,
+					IRQF_SHARED, info->mtd.name, info);
+			if (err) {
+				printk(KERN_INFO"failure requesting irq %i."
+						" Prefetch will work in mpu"
+						" poling mode.\n",
+						info->gpmc_irq);
+			} else {
+				info->nand.read_buf   = omap_read_buf_irq_pref;
+				info->nand.write_buf  = omap_write_buf_irq_pref;
+			}
 		}
+
 	} else {
 		if (info->nand.options & NAND_BUSWIDTH_16) {
 			info->nand.read_buf   = omap_read_buf16;
@@ -964,11 +1145,19 @@  static int __init omap_nand_init(void)
 	/* This check is required if driver is being
 	 * loaded run time as a module
 	 */
-	if ((1 == use_dma) && (0 == use_prefetch)) {
-		printk(KERN_INFO"Wrong parameters: 'use_dma' can not be 1 "
-				"without use_prefetch'. Prefetch will not be"
-				" used in either mode (mpu or dma)\n");
+
+	if ((0 == use_prefetch) && (1 == (use_dma | use_interrupt))) {
+		printk(KERN_INFO "Wrong parameters: Neither 'dma' nor 'irq' "
+				"can used without 'use_prefetch' selected.\n");
+		printk(KERN_INFO "Prefetch will not be used in any mode: "
+				"poll, mpu or dma\n");
+	} else if ((1 == use_prefetch) && (1 == (use_interrupt & use_dma))) {
+			printk(KERN_INFO "Wrong parameters: Both DMA and IRQ"
+					" modes can not be used together.\n");
+			printk(KERN_INFO "It has to be selected at compile "
+					"time and same will be used.\n");
 	}
+
 	return platform_driver_register(&omap_nand_driver);
 }