@@ -260,10 +260,6 @@ static struct regulator_consumer_supply igep2_vmmc1_supply = {
.supply = "vmmc",
};
-static struct regulator_consumer_supply igep2_vmmc2_supply = {
- .supply = "vmmc",
-};
-
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep2_vmmc1 = {
.constraints = {
@@ -279,21 +275,6 @@ static struct regulator_init_data igep2_vmmc1 = {
.consumer_supplies = &igep2_vmmc1_supply,
};
-/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
-static struct regulator_init_data igep2_vmmc2 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &igep2_vmmc2_supply,
-};
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -390,11 +371,11 @@ static int igep2_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
- /* link regulators to MMC adapters ... we "know" the
+ /*
+ * link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
- */
+ */
igep2_vmmc1_supply.dev = mmc[0].dev;
- igep2_vmmc2_supply.dev = mmc[1].dev;
/*
* REVISIT: need ehci-omap hooks for external VBUS
@@ -534,7 +515,6 @@ static struct twl4030_platform_data igep2_twldata = {
.codec = &igep2_codec_data,
.gpio = &igep2_twl4030_gpio_pdata,
.vmmc1 = &igep2_vmmc1,
- .vmmc2 = &igep2_vmmc2,
.vpll2 = &igep2_vpll2,
};