From patchwork Mon Sep 27 16:05:47 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Nordell X-Patchwork-Id: 212912 X-Patchwork-Delegate: tony@atomide.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id o8RG71Ed010730 for ; Mon, 27 Sep 2010 16:07:03 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933226Ab0I0QGl (ORCPT ); Mon, 27 Sep 2010 12:06:41 -0400 Received: from mail.logicpd.com ([66.162.60.3]:29868 "EHLO smtp.logicpd.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1759629Ab0I0QFt (ORCPT ); Mon, 27 Sep 2010 12:05:49 -0400 Received: from mplswks321.logicpd.com ([10.0.5.8]) by smtp.logicpd.com with Microsoft SMTPSVC(6.0.3790.4675); Mon, 27 Sep 2010 11:05:47 -0500 From: Tim Nordell To: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Tim Nordell Subject: [PATCH v4 1/4] Adding LogicPD OMAP3 board support Date: Mon, 27 Sep 2010 11:05:47 -0500 Message-Id: <1285603550-6382-2-git-send-email-tim.nordell@logicpd.com> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1285603550-6382-1-git-send-email-tim.nordell@logicpd.com> References: <1285603550-6382-1-git-send-email-tim.nordell@logicpd.com> X-OriginalArrivalTime: 27 Sep 2010 16:05:47.0351 (UTC) FILETIME=[D8DCCE70:01CB5E5D] Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Mon, 27 Sep 2010 16:07:03 +0000 (UTC) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b48bacf..5403443 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -135,6 +135,26 @@ config MACH_OMAP_LDP default y select OMAP_PACKAGE_CBB +config MACH_OMAP3530_LV_SOM + bool "OMAP3 Logic 3530 LV SOM board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + default y + help + Support for the LogicPD OMAP3530 SOM Development kit + for full description please see the products webpage at + http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap35x-development-kit + +config MACH_OMAP3_TORPEDO + bool "OMAP3 Logic 35x Torpedo board" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + default y + help + Support for the LogicPD OMAP35x Torpedo Development kit + for full description please see the products webpage at + http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit + config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 88d3a1e..9feadd8 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -115,6 +115,10 @@ obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ board-flash.o \ hsmmc.o +obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \ + hsmmc.o +obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \ + hsmmc.o obj-$(CONFIG_MACH_OVERO) += board-overo.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c new file mode 100644 index 0000000..ac3b0f7 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -0,0 +1,143 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3logic.c + * + * Copyright (C) 2010 Li-Pro.Net + * Stephan Linz + * + * Copyright (C) 2010 Logic Product Development, Inc. + * Peter Barada + * + * Modified from Beagle, EVM, and RX51 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include + +#include +#include +#include +#include + +#include "mux.h" + +#include +#include +#include +#include +#include +#include +#include + +#define OMAP3LOGIC_SMSC911X_CS 1 + +#define OMAP3530_LV_SOM_MMC_GPIO_CD 110 +#define OMAP3530_LV_SOM_MMC_GPIO_WP 126 +#define OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ 152 + +#define OMAP3_TORPEDO_MMC_GPIO_CD 127 +#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129 + +static struct regulator_consumer_supply omap3logic_vmmc1_supply = { + .supply = "vmmc", +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data omap3logic_vmmc1 = { + .constraints = { + .name = "VMMC1", + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap3logic_vmmc1_supply, +}; + +static struct twl4030_gpio_platform_data omap3logic_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) + | BIT(13) | BIT(15) | BIT(16) | BIT(17), +}; + +static struct twl4030_platform_data omap3logic_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .gpio = &omap3logic_gpio_data, +}; + +static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &omap3logic_twldata, + }, +}; + +static int __init omap3logic_i2c_init(void) +{ + omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo, + ARRAY_SIZE(omap3logic_i2c_boardinfo)); + return 0; +} + +static void __init omap3logic_init_irq(void) +{ + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static void __init omap3logic_init(void) +{ + omap3logic_i2c_init(); + omap_serial_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +} + +MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .init_irq = omap3logic_init_irq, + .init_machine = omap3logic_init, + .timer = &omap_timer, +MACHINE_END + +MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .init_irq = omap3logic_init_irq, + .init_machine = omap3logic_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ddf723b..ff9f3a2 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -139,6 +139,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP2(1, omap3evm); DEBUG_LL_OMAP3(1, omap_3430sdp); DEBUG_LL_OMAP3(1, omap_3630sdp); + DEBUG_LL_OMAP3(1, omap3530_lv_som); + DEBUG_LL_OMAP3(1, omap3_torpedo); /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35);