From patchwork Mon Sep 27 16:05:50 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tim Nordell X-Patchwork-Id: 212892 X-Patchwork-Delegate: tony@atomide.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id o8RG71Ea010730 for ; Mon, 27 Sep 2010 16:07:02 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933186Ab0I0QF6 (ORCPT ); Mon, 27 Sep 2010 12:05:58 -0400 Received: from mail.logicpd.com ([66.162.60.3]:29868 "EHLO smtp.logicpd.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932420Ab0I0QFv (ORCPT ); Mon, 27 Sep 2010 12:05:51 -0400 Received: from mplswks321.logicpd.com ([10.0.5.8]) by smtp.logicpd.com with Microsoft SMTPSVC(6.0.3790.4675); Mon, 27 Sep 2010 11:05:47 -0500 From: Tim Nordell To: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Tim Nordell Subject: [PATCH v4 4/4] ARM: OMAP3LOGIC: Added SMSC Ethernet board support Date: Mon, 27 Sep 2010 11:05:50 -0500 Message-Id: <1285603550-6382-5-git-send-email-tim.nordell@logicpd.com> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1285603550-6382-1-git-send-email-tim.nordell@logicpd.com> References: <1285603550-6382-1-git-send-email-tim.nordell@logicpd.com> X-OriginalArrivalTime: 27 Sep 2010 16:05:47.0414 (UTC) FILETIME=[D8E66B60:01CB5E5D] Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.3 (demeter1.kernel.org [140.211.167.41]); Mon, 27 Sep 2010 16:07:02 +0000 (UTC) diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index e1f8fbe..687213a 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -141,6 +142,58 @@ static void __init board_mmc_init(void) omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev; } +static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { + .cs = OMAP3LOGIC_SMSC911X_CS, + .gpio_irq = -EINVAL, + .gpio_reset = -EINVAL, + .flags = IORESOURCE_IRQ_LOWLEVEL, +}; + +/* TODO/FIXME (comment by Peter Barada, LogicPD): + * Fix the PBIAS voltage for Torpedo MMC1 pins that + * are used for other needs (IRQs, etc). */ +static void omap3torpedo_fix_pbias_voltage(void) +{ + u16 control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; + u32 reg; + + if (machine_is_omap3_torpedo()) + { + /* Set the bias for the pin */ + reg = omap_ctrl_readl(control_pbias_offset); + + reg &= ~OMAP343X_PBIASLITEPWRDNZ1; + omap_ctrl_writel(reg, control_pbias_offset); + + /* 100ms delay required for PBIAS configuration */ + msleep(100); + + reg |= OMAP343X_PBIASLITEVMODE1; + reg |= OMAP343X_PBIASLITEPWRDNZ1; + omap_ctrl_writel(reg | 0x300, control_pbias_offset); + } +} + +static inline void __init board_smsc911x_init(void) +{ + if (machine_is_omap3530_lv_som()) { + /* OMAP3530 LV SOM board */ + board_smsc911x_data.gpio_irq = + OMAP3530_LV_SOM_SMSC911X_GPIO_IRQ; + omap_mux_init_signal("gpio_152", OMAP_PIN_INPUT); + } else if (machine_is_omap3_torpedo()) { + /* OMAP3 Torpedo board */ + board_smsc911x_data.gpio_irq = OMAP3_TORPEDO_SMSC911X_GPIO_IRQ; + omap_mux_init_signal("gpio_129", OMAP_PIN_INPUT); + } else { + /* unsupported board */ + printk(KERN_ERR "%s(): unknown machine type\n", __func__); + return; + } + + gpmc_smsc911x_init(&board_smsc911x_data); +} + static void __init omap3logic_init_irq(void) { omap2_init_common_hw(NULL, NULL); @@ -148,11 +201,23 @@ static void __init omap3logic_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3logic_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap3torpedo_fix_pbias_voltage(); omap3logic_i2c_init(); omap_serial_init(); board_mmc_init(); + board_smsc911x_init(); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);