@@ -156,6 +156,7 @@ config MENELAUS
config TWL4030_CORE
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
depends on I2C=y && GENERIC_HARDIRQS
+ default y if ARCH_OMAP3 || ARCH_OMAP4
help
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling
@@ -169,7 +170,7 @@ config TWL4030_CORE
config TWL4030_POWER
bool "Support power resources on TWL4030 family chips"
- depends on TWL4030_CORE && ARM
+ depends on TWL4030_CORE
help
Say yes here if you want to use the power resources on the
TWL4030 family chips. Most of these resources are regulators,
@@ -111,6 +111,7 @@ config REGULATOR_MAX8998
config REGULATOR_TWL4030
bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
depends on TWL4030_CORE
+ default y
help
This driver supports the voltage regulators provided by
this family of companion chips.
@@ -111,7 +111,6 @@ config USB_GADGET_SELECTED
#
choice
prompt "USB Peripheral Controller"
- depends on USB_GADGET
help
A USB device uses a controller to talk to its host.
Systems should have only one such upstream link.
@@ -191,7 +190,6 @@ config USB_GADGET_OMAP
boolean "OMAP USB Device Controller"
depends on ARCH_OMAP
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
- select USB_OTG_UTILS if ARCH_OMAP
help
Many Texas Instruments OMAP processors have flexible full
speed USB device controllers, with support for up to 30
@@ -843,6 +841,7 @@ config USB_CDC_COMPOSITE
config USB_G_NOKIA
tristate "Nokia composite gadget"
depends on PHONET
+ depends on USB_GADGET_MUSB_HDRC
help
The Nokia composite gadget provides support for acm, obex
and phonet in only one composite gadget driver.
@@ -11,8 +11,7 @@ config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on (USB || USB_GADGET)
depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
- select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
- select TWL4030_USB if MACH_OMAP_3430SDP
+ depends on (NOP_USB_XCEIV || TWL4030_USB)
select USB_OTG_UTILS
help
Say Y here if your system has a dual role high speed USB
@@ -59,8 +58,7 @@ comment "Blackfin high speed USB Support"
config USB_TUSB6010
boolean "TUSB 6010 support"
- depends on USB_MUSB_HDRC && !USB_MUSB_SOC
- select NOP_USB_XCEIV
+ depends on USB_MUSB_HDRC && !USB_MUSB_SOC && NOP_USB_XCEIV
default y
help
The TUSB 6010 chip, from Texas Instruments, connects a discrete
@@ -53,6 +53,7 @@ config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030
select USB_OTG_UTILS
+ default y if ARCH_OMAP3
help
Enable this to support the USB OTG transceiver on TWL4030
family chips (including the TWL5030 and TPS659x0 devices).
@@ -62,6 +63,7 @@ config TWL4030_USB
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
select USB_OTG_UTILS
+ default y if ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN
help
this driver is to be used by all the usb transceiver which are either
built-in with usb ip or which are autonomous and doesn't require any