@@ -169,7 +169,7 @@ config TWL4030_CORE
config TWL4030_POWER
bool "Support power resources on TWL4030 family chips"
- depends on TWL4030_CORE && ARM
+ depends on TWL4030_CORE
help
Say yes here if you want to use the power resources on the
TWL4030 family chips. Most of these resources are regulators,
@@ -119,6 +119,7 @@ config REGULATOR_MAX8998
config REGULATOR_TWL4030
bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
depends on TWL4030_CORE
+ default y
help
This driver supports the voltage regulators provided by
this family of companion chips.
@@ -111,7 +111,6 @@ config USB_GADGET_SELECTED
#
choice
prompt "USB Peripheral Controller"
- depends on USB_GADGET
help
A USB device uses a controller to talk to its host.
Systems should have only one such upstream link.
@@ -190,9 +189,8 @@ config USB_LH7A40X
config USB_GADGET_OMAP
boolean "OMAP USB Device Controller"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP1
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
- select USB_OTG_UTILS if ARCH_OMAP
help
Many Texas Instruments OMAP processors have flexible full
speed USB device controllers, with support for up to 30
@@ -244,6 +242,7 @@ config USB_PXA25X_SMALL
config USB_GADGET_R8A66597
boolean "Renesas R8A66597 USB Peripheral Controller"
+ depends on ARCH_SHMOBILE
select USB_GADGET_DUALSPEED
help
R8A66597 is a discrete USB host and peripheral controller chip that
@@ -11,8 +11,7 @@ config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on (USB || USB_GADGET)
depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
- select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
- select TWL4030_USB if MACH_OMAP_3430SDP
+ depends on (NOP_USB_XCEIV || TWL4030_USB)
select USB_OTG_UTILS
help
Say Y here if your system has a dual role high speed USB
@@ -63,7 +62,6 @@ comment "Blackfin high speed USB Support"
config USB_MUSB_AM35X
bool
depends on USB_MUSB_HDRC && !ARCH_OMAP2430 && !ARCH_OMAP4
- select NOP_USB_XCEIV
default MACH_OMAP3517EVM
help
Select this option if your platform is based on AM35x. As
@@ -73,8 +71,7 @@ config USB_MUSB_AM35X
config USB_TUSB6010
boolean "TUSB 6010 support"
- depends on USB_MUSB_HDRC && !USB_MUSB_SOC
- select NOP_USB_XCEIV
+ depends on USB_MUSB_HDRC && !USB_MUSB_SOC && NOP_USB_XCEIV
default y
help
The TUSB 6010 chip, from Texas Instruments, connects a discrete
@@ -53,6 +53,7 @@ config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030
select USB_OTG_UTILS
+ default y if ARCH_OMAP3
help
Enable this to support the USB OTG transceiver on TWL4030
family chips (including the TWL5030 and TPS659x0 devices).
@@ -62,6 +63,7 @@ config TWL4030_USB
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
select USB_OTG_UTILS
+ default y if ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN
help
this driver is to be used by all the usb transceiver which are either
built-in with usb ip or which are autonomous and doesn't require any