new file mode 100644
@@ -0,0 +1,82 @@
+/*
+ * omap-dmic.h -- OMAP Digital Microphone Controller
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ * David Lambert <dlambert@ti.com>
+ * Misael Lopez Cruz <misael.lopez@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_DMIC_H
+#define __ASM_ARCH_OMAP_DMIC_H
+
+#define OMAP44XX_DMIC_L3_BASE 0x4902e000
+
+#define OMAP_DMIC_REVISION 0x00
+#define OMAP_DMIC_SYSCONFIG 0x10
+#define OMAP_DMIC_IRQSTATUS_RAW 0x24
+#define OMAP_DMIC_IRQSTATUS 0x28
+#define OMAP_DMIC_IRQENABLE_SET 0x2C
+#define OMAP_DMIC_IRQENABLE_CLR 0x30
+#define OMAP_DMIC_IRQWAKE_EN 0x34
+#define OMAP_DMIC_DMAENABLE_SET 0x38
+#define OMAP_DMIC_DMAENABLE_CLR 0x3C
+#define OMAP_DMIC_DMAWAKEEN 0x40
+#define OMAP_DMIC_CTRL 0x44
+#define OMAP_DMIC_DATA 0x48
+#define OMAP_DMIC_FIFO_CTRL 0x4C
+#define OMAP_DMIC_FIFO_DMIC1R_DATA 0x50
+#define OMAP_DMIC_FIFO_DMIC1L_DATA 0x54
+#define OMAP_DMIC_FIFO_DMIC2R_DATA 0x58
+#define OMAP_DMIC_FIFO_DMIC2L_DATA 0x5C
+#define OMAP_DMIC_FIFO_DMIC3R_DATA 0x60
+#define OMAP_DMIC_FIFO_DMIC3L_DATA 0x64
+
+/*
+ * DMIC_IRQ bit fields
+ * IRQSTATUS_RAW, IRQSTATUS, IRQENABLE_SET, IRQENABLE_CLR
+ */
+
+#define OMAP_DMIC_IRQ (1 << 0)
+#define OMAP_DMIC_IRQ_FULL (1 << 1)
+#define OMAP_DMIC_IRQ_ALMST_EMPTY (1 << 2)
+#define OMAP_DMIC_IRQ_EMPTY (1 << 3)
+#define OMAP_DMIC_IRQ_MASK 0x07
+
+/*
+ * DMIC_DMAENABLE bit fields
+ */
+
+#define OMAP_DMIC_DMA_ENABLE 0x1
+
+/*
+ * DMIC_CTRL bit fields
+ */
+
+#define OMAP_DMIC_UP1_ENABLE 0x0001
+#define OMAP_DMIC_UP2_ENABLE 0x0002
+#define OMAP_DMIC_UP3_ENABLE 0x0004
+#define OMAP_DMIC_FORMAT 0x0008
+#define OMAP_DMIC_POLAR1 0x0010
+#define OMAP_DMIC_POLAR2 0x0020
+#define OMAP_DMIC_POLAR3 0x0040
+#define OMAP_DMIC_POLAR_MASK 0x0070
+#define OMAP_DMIC_CLK_DIV_SHIFT 7
+#define OMAP_DMIC_CLK_DIV_MASK 0x0380
+#define OMAP_DMIC_RESET 0x0400
+
+#define OMAP_DMIC_ENABLE_MASK 0x007
+
+#define OMAP_DMICOUTFORMAT_LJUST (0 << 3)
+#define OMAP_DMICOUTFORMAT_RJUST (1 << 3)
+
+/*
+ * DMIC_FIFO_CTRL bit fields
+ */
+
+#define OMAP_DMIC_THRES_MAX 0xF
+
+#endif
@@ -9,6 +9,9 @@ config SND_OMAP_SOC_MCBSP
config SND_OMAP_SOC_MCPDM
tristate
+config SND_OMAP_SOC_DMIC
+ tristate
+
config SND_OMAP_SOC_N810
tristate "SoC Audio support for Nokia N810"
depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
@@ -103,6 +106,7 @@ config SND_OMAP_SOC_SDP4430
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_4430SDP
select SND_OMAP_SOC_MCPDM
select SND_SOC_TWL6040
+ select SND_SOC_DMIC
help
Say Y if you want to add support for SoC audio on Texas Instruments
SDP4430.
@@ -1,9 +1,11 @@
# OMAP Platform Support
snd-soc-omap-objs := omap-pcm.o
+snd-soc-omap-dmic-objs := omap-dmic.o
snd-soc-omap-mcbsp-objs := omap-mcbsp.o
snd-soc-omap-mcpdm-objs := omap-mcpdm.o mcpdm.o
obj-$(CONFIG_SND_OMAP_SOC) += snd-soc-omap.o
+obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o
obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o
obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o
new file mode 100644
@@ -0,0 +1,553 @@
+/*
+ * omap-dmic.c -- OMAP ASoC DMIC DAI driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ * David Lambert <dlambert@ti.com>
+ * Misael Lopez Cruz <misael.lopez@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#include <plat/control.h>
+#include <plat/dma.h>
+#include <plat/dmic.h>
+#include <plat/omap_hwmod.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "omap-pcm.h"
+
+#define OMAP_DMIC_RATES (SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000)
+#define OMAP_DMIC_FORMATS SNDRV_PCM_FMTBIT_S32_LE
+
+struct omap_dmic {
+ struct device *dev;
+ void __iomem *io_base;
+ int irq;
+ int clk_freq;
+ int sysclk;
+ int active;
+ spinlock_t lock;
+ struct omap_dmic_link *link;
+};
+
+const static struct omap_dmic_link omap_dmic_link = {
+ .irq_mask = OMAP_DMIC_IRQ_FULL,
+ .threshold = 2,
+ .format = OMAP_DMICOUTFORMAT_LJUST,
+ .polar = OMAP_DMIC_POLAR1 | OMAP_DMIC_POLAR2
+ | OMAP_DMIC_POLAR3,
+};
+
+/*
+ * Stream DMA parameters
+ */
+const static struct omap_pcm_dma_data omap_dmic_dai_dma_params = {
+ .name = "DMIC capture",
+ .data_type = OMAP_DMA_DATA_TYPE_S32,
+ .sync_mode = OMAP_DMA_SYNC_PACKET,
+ .packet_size = 2,
+ .port_addr = OMAP44XX_DMIC_L3_BASE + OMAP_DMIC_DATA,
+};
+
+enum omap_dmic_clk {
+ OMAP_DMIC_SYSCLK_PAD_CLKS, /* PAD_CLKS */
+ OMAP_DMIC_SYSCLK_SLIMBLUS_CLKS, /* SLIMBUS_CLK */
+ OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS, /* DMIC_SYNC_MUX_CLK */
+};
+
+/* DMIC dividers */
+enum omap_dmic_div {
+ OMAP_DMIC_CLKDIV,
+};
+
+struct omap_dmic_link {
+ int irq_mask;
+ int threshold;
+ int format;
+ int channels;
+ int polar;
+};
+
+static inline void omap_dmic_write(struct omap_dmic *dmic,
+ u16 reg, u32 val)
+{
+ __raw_writel(val, dmic->io_base + reg);
+}
+
+static inline int omap_dmic_read(struct omap_dmic *dmic, u16 reg)
+{
+ return __raw_readl(dmic->io_base + reg);
+}
+
+/*
+ * Enables the transfer through the DMIC interface
+ */
+static void omap_dmic_start(struct omap_dmic *dmic, int channels)
+{
+ u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL);
+ omap_dmic_write(dmic, OMAP_DMIC_CTRL, ctrl | channels);
+
+}
+
+/*
+ * Disables the transfer through the DMIC interface
+ */
+static void omap_dmic_stop(struct omap_dmic *dmic, int channels)
+{
+ u32 ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL);
+ omap_dmic_write(dmic, OMAP_DMIC_CTRL, ctrl & ~channels);
+}
+
+static int omap_dmic_set_clkdiv(struct snd_soc_dai *dai,
+ int div_id, int div)
+{
+ struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
+ int ctrl, div_sel = -EINVAL;
+
+ if (div_id != OMAP_DMIC_CLKDIV)
+ return -ENODEV;
+
+ switch (dmic->clk_freq) {
+ case 19200000:
+ if (div == 5)
+ div_sel = 0x1;
+ else if (div == 8)
+ div_sel = 0x0;
+ break;
+ case 24000000:
+ if (div == 10)
+ div_sel = 0x2;
+ break;
+ case 24576000:
+ if (div == 8)
+ div_sel = 0x3;
+ else if (div == 16)
+ div_sel = 0x4;
+ break;
+ case 12000000:
+ if (div == 5)
+ div_sel = 0x5;
+ break;
+ default:
+ dev_err(dai->dev, "invalid freq %d\n", dmic->clk_freq);
+ return -EINVAL;
+ }
+
+ if (div_sel < 0) {
+ dev_err(dai->dev, "divider not supported %d\n", div);
+ return -EINVAL;
+ }
+
+ ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL) & ~OMAP_DMIC_CLK_DIV_MASK;
+
+ omap_dmic_write(dmic, OMAP_DMIC_CTRL,
+ ctrl | (div_sel << OMAP_DMIC_CLK_DIV_SHIFT));
+
+ return 0;
+}
+
+/*
+ * Configures DMIC for audio recording.
+ * This function should be called before omap_dmic_start.
+ */
+static int omap_dmic_open(struct omap_dmic *dmic)
+{
+ struct omap_dmic_link *link = dmic->link;
+ u32 ctrl;
+
+ /* Enable irq request generation */
+ omap_dmic_write(dmic, OMAP_DMIC_IRQENABLE_SET,
+ link->irq_mask & OMAP_DMIC_IRQ_MASK);
+
+ /* Configure uplink threshold */
+ if (link->threshold > OMAP_DMIC_THRES_MAX)
+ link->threshold = OMAP_DMIC_THRES_MAX;
+
+ omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL, link->threshold);
+
+ /* Configure DMA controller */
+ omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_SET, OMAP_DMIC_DMA_ENABLE);
+
+ /* Set dmic out format */
+ ctrl = omap_dmic_read(dmic, OMAP_DMIC_CTRL)
+ & ~(OMAP_DMIC_FORMAT | OMAP_DMIC_POLAR_MASK);
+ omap_dmic_write(dmic, OMAP_DMIC_CTRL,
+ ctrl | link->format | link->polar);
+
+ return 0;
+}
+
+/*
+ * Cleans DMIC uplink configuration.
+ * This function should be called when the stream is closed.
+ */
+static int omap_dmic_close(struct omap_dmic *dmic)
+{
+ struct omap_dmic_link *link = dmic->link;
+
+ /* Disable irq request generation */
+ omap_dmic_write(dmic, OMAP_DMIC_IRQENABLE_CLR,
+ link->irq_mask & OMAP_DMIC_IRQ_MASK);
+
+ /* Disable DMA request generation */
+ omap_dmic_write(dmic, OMAP_DMIC_DMAENABLE_CLR, OMAP_DMIC_DMA_ENABLE);
+
+ return 0;
+}
+
+static irqreturn_t omap_dmic_irq_handler(int irq, void *dev_id)
+{
+ struct omap_dmic *dmic = dev_id;
+ u32 irq_status;
+
+ irq_status = omap_dmic_read(dmic, OMAP_DMIC_IRQSTATUS);
+
+ /* Acknowledge irq event */
+ omap_dmic_write(dmic, OMAP_DMIC_IRQSTATUS, irq_status);
+ if (irq_status & OMAP_DMIC_IRQ_FULL)
+ dev_dbg(dmic->dev, "DMIC FIFO error %x\n", irq_status);
+
+ if (irq_status & OMAP_DMIC_IRQ_EMPTY)
+ dev_dbg(dmic->dev, "DMIC FIFO error %x\n", irq_status);
+
+ return IRQ_HANDLED;
+}
+
+static int omap_dmic_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
+
+ dmic->active++;
+ pm_runtime_get_sync(dmic->dev);
+
+ return 0;
+}
+
+static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
+
+ dmic->active--;
+ pm_runtime_put_sync(dmic->dev);
+}
+
+static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
+ struct omap_dmic_link *link = dmic->link;
+ int channels, rate, div;
+ int ret = 0;
+
+ channels = params_channels(params);
+ switch (channels) {
+ case 6:
+ link->channels = OMAP_DMIC_UP1_ENABLE | OMAP_DMIC_UP2_ENABLE
+ | OMAP_DMIC_UP3_ENABLE;
+ break;
+ case 4:
+ link->channels = OMAP_DMIC_UP1_ENABLE | OMAP_DMIC_UP2_ENABLE;
+ break;
+ case 2:
+ link->channels = OMAP_DMIC_UP1_ENABLE;
+ break;
+ default:
+ dev_err(dmic->dev, "invalid number of channels\n");
+ return -EINVAL;
+ }
+
+ rate = params_rate(params);
+ switch (rate) {
+ case 192000:
+ div = 5;
+ break;
+ default:
+ div = 8;
+ }
+
+ omap_dmic_set_clkdiv(dai, OMAP_DMIC_CLKDIV, div);
+
+ omap_dmic_dai_dma_params.packet_size = link->threshold * channels;
+ snd_soc_dai_set_dma_data(dai, substream, &omap_dmic_dai_dma_params);
+
+ if (dmic->active == 1)
+ ret = omap_dmic_open(dmic);
+
+ return ret;
+}
+
+static int omap_dmic_dai_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
+ struct omap_dmic_link *link = dmic->link;
+ int ret = 0;
+
+ if (dmic->active == 1) {
+ ret = omap_dmic_close(dmic);
+ link->channels = 0;
+ }
+
+ return ret;
+}
+
+static int omap_dmic_dai_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *dai)
+{
+ struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
+ int dmic_id = dmic->link->channels;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ omap_dmic_start(dmic, dmic_id);
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ omap_dmic_stop(dmic, dmic_id);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int omap_dmic_set_dai_sysclk(struct snd_soc_dai *dai,
+ int clk_id, int dir)
+{
+ struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai);
+ struct clk *dmic_clk, *parent_clk;
+ int ret = 0;
+
+ dmic_clk = clk_get(NULL, "dmic_fck");
+ if (IS_ERR(dmic_clk))
+ return -ENODEV;
+
+ switch (clk_id) {
+ case OMAP_DMIC_SYSCLK_PAD_CLKS:
+ parent_clk = clk_get(NULL, "pad_clks_ck");
+ if (IS_ERR(parent_clk)) {
+ ret = -ENODEV;
+ goto err_par;
+ }
+ break;
+ case OMAP_DMIC_SYSCLK_SLIMBLUS_CLKS:
+ parent_clk = clk_get(NULL, "slimbus_clk");
+ if (IS_ERR(parent_clk)) {
+ ret = -ENODEV;
+ goto err_par;
+ }
+ break;
+ case OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS:
+ parent_clk = clk_get(NULL, "dmic_sync_mux_ck");
+ if (IS_ERR(parent_clk)) {
+ ret = -ENODEV;
+ goto err_par;
+ }
+ break;
+ default:
+ dev_err(dai->dev, "clk_id not supported %d\n", clk_id);
+ ret = -EINVAL;
+ goto err_par;
+ }
+
+ if (dmic->sysclk != clk_id) {
+ /* reparent not allowed if a stream is ongoing */
+ if (dmic->active > 1) {
+ ret = -EBUSY;
+ goto err_busy;
+ }
+
+ /* disable clock while reparenting */
+ if (dmic->active == 1)
+ pm_runtime_put_sync(dmic->dev);
+
+ ret = clk_set_parent(dmic_clk, parent_clk);
+
+ if (dmic->active == 1)
+ pm_runtime_get_sync(dmic->dev);
+
+ dmic->sysclk = clk_id;
+ }
+
+err_busy:
+ clk_put(parent_clk);
+err_par:
+ clk_put(dmic_clk);
+
+ return ret;
+}
+
+static struct snd_soc_dai_ops omap_dmic_dai_ops = {
+ .startup = omap_dmic_dai_startup,
+ .shutdown = omap_dmic_dai_shutdown,
+ .hw_params = omap_dmic_dai_hw_params,
+ .trigger = omap_dmic_dai_trigger,
+ .hw_free = omap_dmic_dai_hw_free,
+ .set_sysclk = omap_dmic_set_dai_sysclk,
+ .set_clkdiv = omap_dmic_set_clkdiv,
+};
+
+static struct snd_soc_dai_driver omap_dmic_dai = {
+
+ .name = "omap-dmic-dai-0",
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 6,
+ .rates = OMAP_DMIC_RATES,
+ .formats = OMAP_DMIC_FORMATS,
+ },
+ .ops = &omap_dmic_dai_ops,
+};
+
+static __devinit int asoc_dmic_probe(struct platform_device *pdev)
+{
+ struct omap_dmic *dmic;
+ struct resource *res;
+ int ret;
+
+ dmic = kzalloc(sizeof(struct omap_dmic), GFP_KERNEL);
+ if (!dmic)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, dmic);
+ dmic->dev = &pdev->dev;
+ dmic->link = &omap_dmic_link;
+ dmic->sysclk = OMAP_DMIC_SYSCLK_SYNC_MUX_CLKS;
+
+ spin_lock_init(&dmic->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dmic->dev, "invalid memory resource\n");
+ ret = -ENODEV;
+ goto err_res;
+ }
+
+ dmic->io_base = ioremap(res->start, resource_size(res));
+ if (!dmic->io_base) {
+ ret = -ENOMEM;
+ goto err_res;
+ }
+
+ dmic->irq = platform_get_irq(pdev, 0);
+ if (dmic->irq < 0) {
+ ret = dmic->irq;
+ goto err_irq;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (!res) {
+ dev_err(dmic->dev, "invalid dma resource\n");
+ ret = -ENODEV;
+ goto err_irq;
+ }
+ omap_dmic_dai_dma_params.dma_req = res->start;
+
+ pm_runtime_enable(dmic->dev);
+
+ /* Disable lines while request is ongoing */
+ omap_dmic_write(dmic, OMAP_DMIC_CTRL, 0x00);
+
+ ret = request_threaded_irq(dmic->irq, NULL, omap_dmic_irq_handler,
+ IRQF_ONESHOT, "DMIC", (void *)dmic);
+ if (ret) {
+ dev_err(dmic->dev, "irq request failed\n");
+ goto err_irq;
+ }
+
+ ret = snd_soc_register_dais(&pdev->dev, &omap_dmic_dai, 1);
+ if (ret)
+ goto err_dai;
+
+ return 0;
+
+err_dai:
+ free_irq(dmic->irq, dmic);
+err_irq:
+ iounmap(dmic->io_base);
+err_res:
+ kfree(dmic);
+ return ret;
+}
+
+static int __devexit asoc_dmic_remove(struct platform_device *pdev)
+{
+ struct omap_dmic *dmic = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_dai(&pdev->dev);
+ free_irq(dmic->irq, dmic);
+ iounmap(dmic->io_base);
+ pm_runtime_disable(dmic->dev);
+ kfree(dmic);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:omap-dmic-dai");
+
+static struct platform_driver asoc_dmic_driver = {
+ .driver = {
+ .name = "omap-dmic-dai",
+ .owner = THIS_MODULE,
+ },
+ .probe = asoc_dmic_probe,
+ .remove = __devexit_p(asoc_dmic_remove),
+};
+
+static int __init snd_omap_dmic_init(void)
+{
+ return platform_driver_register(&asoc_dmic_driver);
+}
+module_init(snd_omap_dmic_init);
+
+static void __exit snd_omap_dmic_exit(void)
+{
+ platform_driver_unregister(&asoc_dmic_driver);
+}
+module_exit(snd_omap_dmic_exit);
+
+MODULE_AUTHOR("David Lambert <dlambert@ti.com>");
+MODULE_DESCRIPTION("OMAP DMIC SoC Interface");
+MODULE_LICENSE("GPL");