From patchwork Fri Jan 28 10:12:09 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sukumar Ghorai X-Patchwork-Id: 514461 X-Patchwork-Delegate: tony@atomide.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p0SACT14017650 for ; Fri, 28 Jan 2011 10:13:45 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754002Ab1A1KM2 (ORCPT ); Fri, 28 Jan 2011 05:12:28 -0500 Received: from devils.ext.ti.com ([198.47.26.153]:40168 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752754Ab1A1KMY (ORCPT ); Fri, 28 Jan 2011 05:12:24 -0500 Received: from dbdp31.itg.ti.com ([172.24.170.98]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id p0SACHUC004850 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 28 Jan 2011 04:12:19 -0600 Received: from localhost.localdomain (localhost [127.0.0.1]) by dbdp31.itg.ti.com (8.13.8/8.13.8) with ESMTP id p0SACAue010218; Fri, 28 Jan 2011 15:42:15 +0530 (IST) From: Sukumar Ghorai To: linux-omap@vger.kernel.org Cc: linux-mtd@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Sukumar Ghorai , Vimal Singh Subject: [PATCH v9 7/7] omap3: nand: making ecc layout as compatible with romcode ecc Date: Fri, 28 Jan 2011 15:42:09 +0530 Message-Id: <1296209529-22696-8-git-send-email-s-ghorai@ti.com> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1296209529-22696-1-git-send-email-s-ghorai@ti.com> References: <1296209529-22696-1-git-send-email-s-ghorai@ti.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Fri, 28 Jan 2011 10:13:45 +0000 (UTC) diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 773351b..12b3161 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -90,6 +90,8 @@ enum omap_ecc { /* 1-bit ecc: stored at end of spare area */ OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ + /* 1-bit ecc: stored at begining of spare area as romcode */ + OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ }; /* diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 6d4a42e..4e33972 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -98,6 +98,20 @@ static const char *part_probes[] = { "cmdlinepart", NULL }; #endif +/* oob info generated runtime depending on ecc algorithm and layout selected */ +static struct nand_ecclayout omap_oobinfo; +/* Define some generic bad / good block scan pattern which are used + * while scanning a device for factory marked good / bad blocks + */ +static uint8_t scan_ff_pattern[] = { 0xff }; +static struct nand_bbt_descr bb_descrip_flashbased = { + .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, + .offs = 0, + .len = 1, + .pattern = scan_ff_pattern, +}; + + struct omap_nand_info { struct nand_hw_control controller; struct omap_nand_platform_data *pdata; @@ -914,6 +928,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) struct omap_nand_info *info; struct omap_nand_platform_data *pdata; int err; + int i, offset; pdata = pdev->dev.platform_data; if (pdata == NULL) { @@ -1037,7 +1052,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) /* selsect the ecc type */ if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT) info->nand.ecc.mode = NAND_ECC_SOFT; - else if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) { + else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) || + (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) { info->nand.ecc.bytes = 3; info->nand.ecc.size = 512; info->nand.ecc.calculate = omap_calculate_ecc; @@ -1057,6 +1073,25 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) } } + /* rom code layout */ + if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE) { + + if (info->nand.options & NAND_BUSWIDTH_16) + offset = 2; + else { + offset = 1; + info->nand.badblock_pattern = &bb_descrip_flashbased; + } + omap_oobinfo.eccbytes = 3 * (info->mtd.oobsize/16); + for (i = 0; i < omap_oobinfo.eccbytes; i++) + omap_oobinfo.eccpos[i] = i+offset; + + omap_oobinfo.oobfree->offset = offset + omap_oobinfo.eccbytes; + omap_oobinfo.oobfree->length = info->mtd.oobsize - + (offset + omap_oobinfo.eccbytes); + + info->nand.ecc.layout = &omap_oobinfo; + } #ifdef CONFIG_MTD_PARTITIONS err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);