new file mode 100644
@@ -0,0 +1,45 @@
+Kernel driver twl4030-madc
+=========================
+
+Supported chips:
+ * Texas Instruments TWL4030
+ Prefix: 'twl4030-madc'
+
+
+Authors:
+ J Keerthy <j-keerthy@ti.com>
+
+Description
+-----------
+
+The Texas Instruments TWL4030 is a Power Management and Audio Circuit. Among
+other things it contains a 10-bit A/D converter MADC. The converter has 16
+channels which can be used in different modes.
+
+
+See this table for the meaning of the different channels
+
+Channel Signal
+------------------------------------------
+0 Battery type(BTYPE)
+1 BCI: Battery temperature (BTEMP)
+2 GP analog input
+3 GP analog input
+4 GP analog input
+5 GP analog input
+6 GP analog input
+7 GP analog input
+8 BCI: VBUS voltage(VBUS)
+9 Backup Battery voltage (VBKP)
+10 BCI: Battery charger current (ICHG)
+11 BCI: Battery charger voltage (VCHG)
+12 BCI: Main battery voltage (VBAT)
+13 Reserved
+14 Reserved
+15 VRUSB Supply/Speaker left/Speaker right polarization level
+
+
+The Sysfs nodes will represent the voltage in the units of mV,
+the temperature channel shows the converted raw voltage in mV.
+The Battery charging current channel represents raw voltage mV.
+Channel 13 and 14 are reserved.
@@ -940,6 +940,16 @@ config SENSORS_TMP421
This driver can also be built as a module. If so, the module
will be called tmp421.
+config SENSORS_TWL4030_MADC
+ tristate "Texas Instruments TWL4030 MADC Hwmon"
+ depends on TWL4030_MADC
+ help
+ This driver provides hwmon support for triton TWL4030-MADC.
+ This driver can be built as part of kernel or can be built
+ as a module.
+ This driver exposes the various voltage values to
+ the user space.
+
config SENSORS_VIA_CPUTEMP
tristate "VIA CPU temperature sensor"
depends on X86
@@ -102,6 +102,7 @@ obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
obj-$(CONFIG_SENSORS_TMP102) += tmp102.o
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
+obj-$(CONFIG_SENSORS_TWL4030_MADC)+= twl4030-madc-hwmon.o
obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
obj-$(CONFIG_SENSORS_VT1211) += vt1211.o
new file mode 100644
@@ -0,0 +1,155 @@
+/*
+ *
+ * TWL4030 MADC Hwmon driver-This driver monitors the real time
+ * conversion of analog signals like battery temperature,
+ * battery type, battery level etc. User can ask for the conversion on a
+ * particular channel using the sysfs nodes.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * J Keerthy <j-keerthy@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/i2c/twl.h>
+#include <linux/i2c/twl4030-madc.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * sysfs hook function
+ */
+static ssize_t madc_read(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct twl4030_madc_request req;
+ long val;
+
+ req.channels = (1 << attr->index);
+ req.method = TWL4030_MADC_SW2;
+ req.func_cb = NULL;
+ val = twl4030_madc_conversion(&req);
+ if (val >= 0)
+ val = req.rbuf[attr->index];
+ else
+ return val;
+
+ return sprintf(buf, "%ld\n", val);
+}
+
+/* sysfs nodes to read individual channels from user side */
+static SENSOR_DEVICE_ATTR(in0_battery_type, S_IRUGO, madc_read, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_battery_temp, S_IRUGO, madc_read, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, madc_read, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, madc_read, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, madc_read, NULL, 4);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, madc_read, NULL, 5);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, madc_read, NULL, 6);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, madc_read, NULL, 7);
+static SENSOR_DEVICE_ATTR(in8_vbus, S_IRUGO, madc_read, NULL, 8);
+static SENSOR_DEVICE_ATTR(in9_vbkp, S_IRUGO, madc_read, NULL, 9);
+static SENSOR_DEVICE_ATTR(in10_battery_charger_current,
+ S_IRUGO, madc_read, NULL, 10);
+static SENSOR_DEVICE_ATTR(in11_battery_charger_voltage,
+ S_IRUGO, madc_read, NULL, 11);
+static SENSOR_DEVICE_ATTR(in12_main_battery_voltage,
+ S_IRUGO, madc_read, NULL, 12);
+static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, madc_read, NULL, 13);
+
+static struct attribute *twl4030_madc_attributes[] = {
+ &sensor_dev_attr_in0_battery_type.dev_attr.attr,
+ &sensor_dev_attr_in1_battery_temp.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in8_vbus.dev_attr.attr,
+ &sensor_dev_attr_in9_vbkp.dev_attr.attr,
+ &sensor_dev_attr_in10_battery_charger_current.dev_attr.attr,
+ &sensor_dev_attr_in11_battery_charger_voltage.dev_attr.attr,
+ &sensor_dev_attr_in12_main_battery_voltage.dev_attr.attr,
+ &sensor_dev_attr_in15_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group twl4030_madc_group = {
+ .attrs = twl4030_madc_attributes,
+};
+
+static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev)
+{
+ int ret;
+ int status;
+ struct device *hwmon;
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &twl4030_madc_group);
+ if (ret)
+ goto err_sysfs;
+ hwmon = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon)) {
+ dev_err(&pdev->dev, "hwmon_device_register failed.\n");
+ status = PTR_ERR(hwmon);
+ goto err_reg;
+ }
+
+ return 0;
+
+err_reg:
+ sysfs_remove_group(&pdev->dev.kobj, &twl4030_madc_group);
+err_sysfs:
+
+ return ret;
+}
+
+static int __devexit twl4030_madc_hwmon_remove(struct platform_device *pdev)
+{
+ hwmon_device_unregister(&pdev->dev);
+ sysfs_remove_group(&pdev->dev.kobj, &twl4030_madc_group);
+
+ return 0;
+}
+
+static struct platform_driver twl4030_madc_hwmon_driver = {
+ .probe = twl4030_madc_hwmon_probe,
+ .remove = __exit_p(twl4030_madc_hwmon_remove),
+ .driver = {
+ .name = "twl4030_madc_hwmon",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init twl4030_madc_hwmon_init(void)
+{
+ return platform_driver_register(&twl4030_madc_hwmon_driver);
+}
+
+module_init(twl4030_madc_hwmon_init);
+
+static void __exit twl4030_madc_hwmon_exit(void)
+{
+ platform_driver_unregister(&twl4030_madc_hwmon_driver);
+}
+
+module_exit(twl4030_madc_hwmon_exit);
+
+MODULE_DESCRIPTION("TWL4030 ADC Hwmon driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("J Keerthy");
+MODULE_ALIAS("twl4030_madc_hwmon");