diff mbox

[v2,2/7] OMAP: DSS: Adding a picodlp panel header file

Message ID 1304347971-1504-3-git-send-email-mayur@ti.com (mailing list archive)
State Rejected
Delegated to: Tomi Valkeinen
Headers show

Commit Message

MAYURESH JANORKAR May 2, 2011, 2:52 p.m. UTC
From: Mythri P K <mythripk@ti.com>

picodlp is a projector panel connected supported by OMAP.

The panel requires various commands for configurations defined together
in this header file.
To know more about commands please visit:
http://focus.ti.com/lit/ug/dlpu002a/dlpu002a.pdf

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Mayuresh Janorkar <mayur@ti.com>
---
Changes since v1: Nil

 drivers/video/omap2/displays/panel-picodlp.h |  287 ++++++++++++++++++++++++++
 1 files changed, 287 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-picodlp.h
diff mbox

Patch

diff --git a/drivers/video/omap2/displays/panel-picodlp.h b/drivers/video/omap2/displays/panel-picodlp.h
new file mode 100644
index 0000000..1c0bab4
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-picodlp.h
@@ -0,0 +1,287 @@ 
+/*
+ * Header file required by picodlp panel driver
+ *
+ * Copyright (C) 2009-2011 Texas Instruments
+ * Author: Mythri P K <mythripk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H
+#define __OMAP2_DISPLAY_PANEL_PICODLP_H
+
+/* Commands used for configuring picodlp panel */
+
+#define MAIN_STATUS			0x03
+#define PBC_CONTROL			0x08
+#define INPUT_SOURCE			0x0B
+#define INPUT_RESOLUTION		0x0C
+#define DATA_FORMAT			0x0D
+#define IMG_ROTATION			0x0E
+#define LONG_FLIP			0x0F
+#define SHORT_FLIP			0x10
+#define TEST_PAT_SELECT			0x11
+#define R_DRIVE_CURRENT			0x12
+#define G_DRIVE_CURRENT			0x13
+#define B_DRIVE_CURRENT			0x14
+#define READ_REG_SELECT			0x15
+#define RGB_DRIVER_ENABLE		0x16
+
+#define CPU_IF_MODE			0x18
+#define FRAME_RATE			0x19
+#define CPU_IF_SYNC_METHOD		0x1A
+#define CPU_IF_SOF			0x1B
+#define CPU_IF_EOF			0x1C
+#define CPU_IF_SLEEP			0x1D
+
+#define SEQUENCE_MODE			0x1E
+#define SOFT_RESET			0x1F
+#define FRONT_END_RESET			0x21
+#define AUTO_PWR_ENABLE			0x22
+
+#define VSYNC_LINE_DELAY		0x23
+#define CPU_PI_HORIZ_START		0x24
+#define CPU_PI_VERT_START		0x25
+#define CPU_PI_HORIZ_WIDTH		0x26
+#define CPU_PI_VERT_HEIGHT		0x27
+
+#define PIXEL_MASK_CROP			0x28
+#define CROP_FIRST_LINE			0x29
+#define CROP_LAST_LINE			0x2A
+#define CROP_FIRST_PIXEL		0x2B
+#define CROP_LAST_PIXEL			0x2C
+#define DMD_PARK_TRIGGER		0x2D
+
+#define MISC_REG			0x30
+
+/* AGC registers */
+#define AGC_CTRL			0x50
+#define AGC_CLIPPED_PIXS		0x55
+#define AGC_BRIGHT_PIXS			0x56
+#define AGC_BG_PIXS			0x57
+#define AGC_SAFETY_MARGIN		0x17
+
+/* Color Coordinate Adjustment registers */
+#define CCA_ENABLE		0x5E
+#define CCA_C1A			0x5F
+#define CCA_C1B			0x60
+#define CCA_C1C			0x61
+#define CCA_C2A			0x62
+#define CCA_C2B			0x63
+#define CCA_C2C			0x64
+#define CCA_C3A			0x65
+#define CCA_C3B			0x66
+#define CCA_C3C			0x67
+#define CCA_C7A			0x71
+#define CCA_C7B			0x72
+#define CCA_C7C			0x73
+
+/**
+ * DLP Pico Processor 2600 comes with flash
+ * We can do DMA operations from flash for accessing Look Up Tables
+ */
+#define FLASH_ADDR_BYTES		0x74
+#define FLASH_DUMMY_BYTES		0x75
+#define FLASH_WRITE_BYTES		0x76
+#define FLASH_READ_BYTES		0x77
+#define FLASH_OPCODE			0x78
+#define FLASH_START_ADDR		0x79
+#define FLASH_DUMMY2			0x7A
+#define FLASH_WRITE_DATA		0x7B
+
+#define TEMPORAL_DITH_DISABLE		0x7E
+#define SEQ_CONTROL			0x82
+#define SEQ_VECTOR			0x83
+
+/* DMD is Digital Micromirror Device */
+#define DMD_BLOCK_COUNT			0x84
+#define DMD_VCC_CONTROL			0x86
+#define DMD_PARK_PULSE_COUNT		0x87
+#define DMD_PARK_PULSE_WIDTH		0x88
+#define DMD_PARK_DELAY			0x89
+#define DMD_SHADOW_ENABLE		0x8E
+#define SEQ_STATUS			0x8F
+#define FLASH_CLOCK_CONTROL		0x98
+#define DMD_PARK			0x2D
+
+#define SDRAM_BIST_ENABLE		0x46
+#define DDR_DRIVER_STRENGTH		0x9A
+#define SDC_ENABLE			0x9D
+#define SDC_BUFF_SWAP_DISABLE		0xA3
+#define CURTAIN_CONTROL			0xA6
+#define DDR_BUS_SWAP_ENABLE		0xA7
+#define DMD_TRC_ENABLE			0xA8
+#define DMD_BUS_SWAP_ENABLE		0xA9
+
+#define ACTGEN_ENABLE			0xAE
+#define ACTGEN_CONTROL			0xAF
+#define ACTGEN_HORIZ_BP			0xB0
+#define ACTGEN_VERT_BP			0xB1
+
+/* Look Up Table access */
+#define CMT_SPLASH_LUT_START_ADDR	0xFA
+#define CMT_SPLASH_LUT_DEST_SELECT	0xFB
+#define CMT_SPLASH_LUT_DATA		0xFC
+#define SEQ_RESET_LUT_START_ADDR	0xFD
+#define SEQ_RESET_LUT_DEST_SELECT	0xFE
+#define SEQ_RESET_LUT_DATA		0xFF
+
+/* Input source definitions */
+#define PARALLEL_RGB		0
+#define INT_TEST_PATTERN	1
+#define SPLASH_SCREEN		2
+#define CPU_INTF		3
+#define BT656			4
+
+/* Standard input resolution definitions */
+#define QWVGA_LANDSCAPE		3	/* (427h*240v) */
+#define WVGA_864_LANDSCAPE	21	/* (864h*480v) */
+#define WVGA_DMD_OPTICAL_TEST	35	/* (608h*684v) */
+
+/* Standard data format definitions */
+#define RGB565			0
+#define RGB666			1
+#define RGB888			2
+
+/* Test Pattern definitions */
+#define TPG_CHECKERBOARD	0
+#define TPG_BLACK		1
+#define TPG_WHITE		2
+#define TPG_RED			3
+#define TPG_BLUE		4
+#define TPG_GREEN		5
+#define TPG_VLINES_BLACK	6
+#define TPG_HLINES_BLACK	7
+#define TPG_VLINES_ALT		8
+#define TPG_HLINES_ALT		9
+#define TPG_DIAG_LINES		10
+#define TPG_GREYRAMP_VERT	11
+#define TPG_GREYRAMP_HORIZ	12
+#define TPG_ANSI_CHECKERBOARD	13
+
+/* sequence mode definitions */
+#define SEQ_FREE_RUN		0
+#define SEQ_LOCK		1
+
+/* curtain color definitions */
+#define CURTAIN_BLACK		0
+#define CURTAIN_RED		1
+#define CURTAIN_GREEN		2
+#define CURTAIN_BLUE		3
+#define CURTAIN_YELLOW		4
+#define CURTAIN_MAGENTA		5
+#define CURTAIN_CYAN		6
+#define CURTAIN_WHITE		7
+
+/* LUT definitions */
+#define CMT_LUT_NONE		0
+#define CMT_LUT_GREEN		1
+#define CMT_LUT_RED		2
+#define CMT_LUT_BLUE		3
+#define CMT_LUT_ALL		4
+#define SPLASH_LUT		5
+
+#define SEQ_LUT_NONE		0
+#define SEQ_DRC_LUT_0		1
+#define SEQ_DRC_LUT_1		2
+#define SEQ_DRC_LUT_2		3
+#define SEQ_DRC_LUT_3		4
+#define SEQ_SEQ_LUT		5
+#define SEQ_DRC_LUT_ALL		6
+#define WPC_PROGRAM_LUT		7
+
+#define BITSTREAM_START_ADDR		0x00000000
+#define BITSTREAM_SIZE			0x00040000
+
+#define WPC_FW_0_START_ADDR		0x00040000
+#define WPC_FW_0_SIZE			0x00000ce8
+
+#define SEQUENCE_0_START_ADDR		0x00044000
+#define SEQUENCE_0_SIZE			0x00001000
+
+#define SEQUENCE_1_START_ADDR		0x00045000
+#define SEQUENCE_1_SIZE			0x00000d10
+
+#define SEQUENCE_2_START_ADDR		0x00046000
+#define SEQUENCE_2_SIZE			0x00000d10
+
+#define SEQUENCE_3_START_ADDR		0x00047000
+#define SEQUENCE_3_SIZE			0x00000d10
+
+#define SEQUENCE_4_START_ADDR		0x00048000
+#define SEQUENCE_4_SIZE			0x00000d10
+
+#define SEQUENCE_5_START_ADDR		0x00049000
+#define SEQUENCE_5_SIZE			0x00000d10
+
+#define SEQUENCE_6_START_ADDR		0x0004a000
+#define SEQUENCE_6_SIZE			0x00000d10
+
+#define CMT_LUT_0_START_ADDR		0x0004b200
+#define CMT_LUT_0_SIZE			0x00000600
+
+#define CMT_LUT_1_START_ADDR		0x0004b800
+#define CMT_LUT_1_SIZE			0x00000600
+
+#define CMT_LUT_2_START_ADDR		0x0004be00
+#define CMT_LUT_2_SIZE			0x00000600
+
+#define CMT_LUT_3_START_ADDR		0x0004c400
+#define CMT_LUT_3_SIZE			0x00000600
+
+#define CMT_LUT_4_START_ADDR		0x0004ca00
+#define CMT_LUT_4_SIZE			0x00000600
+
+#define CMT_LUT_5_START_ADDR		0x0004d000
+#define CMT_LUT_5_SIZE			0x00000600
+
+#define CMT_LUT_6_START_ADDR		0x0004d600
+#define CMT_LUT_6_SIZE			0x00000600
+
+#define DRC_TABLE_0_START_ADDR		0x0004dc00
+#define DRC_TABLE_0_SIZE		0x00000100
+
+#define SPLASH_0_START_ADDR		0x0004dd00
+#define SPLASH_0_SIZE			0x00032280
+
+#define SEQUENCE_7_START_ADDR		0x00080000
+#define SEQUENCE_7_SIZE			0x00000d10
+
+#define SEQUENCE_8_START_ADDR		0x00081800
+#define SEQUENCE_8_SIZE			0x00000d10
+
+#define SEQUENCE_9_START_ADDR		0x00083000
+#define SEQUENCE_9_SIZE			0x00000d10
+
+#define CMT_LUT_7_START_ADDR		0x0008e000
+#define CMT_LUT_7_SIZE			0x00000600
+
+#define CMT_LUT_8_START_ADDR		0x0008e800
+#define CMT_LUT_8_SIZE			0x00000600
+
+#define CMT_LUT_9_START_ADDR		0x0008f000
+#define CMT_LUT_9_SIZE			0x00000600
+
+#define SPLASH_1_START_ADDR		0x0009a000
+#define SPLASH_1_SIZE			0x00032280
+
+#define SPLASH_2_START_ADDR		0x000cd000
+#define SPLASH_2_SIZE			0x00032280
+
+#define SPLASH_3_START_ADDR		0x00100000
+#define SPLASH_3_SIZE			0x00032280
+
+#define OPT_SPLASH_0_START_ADDR		0x00134000
+#define OPT_SPLASH_0_SIZE		0x000cb100
+
+#endif