diff mbox

[v5,2/4] OMAP: DSS: Adding a picodlp header file

Message ID 1305634783-21265-3-git-send-email-mayur@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

MAYURESH JANORKAR May 17, 2011, 12:19 p.m. UTC
From: Mythri P K <mythripk@ti.com>

picodlp is a projector connected supported by OMAP.

DLP used in OMAP4 is dpp2600 (DLP Pico Projector)
The DLP requires commands to be sent over i2c for configurations,
Commands are defined together in this header file

To know more about dpp2600 commands please visit:
https://focus.ti.com/myti/docs/extranet.tsp?sectionId=403

Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Mayuresh Janorkar <mayur@ti.com>
---
Changes since v3, v4: Nil

Changes since v2:
		Added DMA_STATUS definition

Changes since v1: Nil

 drivers/video/omap2/displays/panel-picodlp.h |  288 ++++++++++++++++++++++++++
 1 files changed, 288 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/omap2/displays/panel-picodlp.h
diff mbox

Patch

diff --git a/drivers/video/omap2/displays/panel-picodlp.h b/drivers/video/omap2/displays/panel-picodlp.h
new file mode 100644
index 0000000..a34b431
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-picodlp.h
@@ -0,0 +1,288 @@ 
+/*
+ * Header file required by picodlp panel driver
+ *
+ * Copyright (C) 2009-2011 Texas Instruments
+ * Author: Mythri P K <mythripk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H
+#define __OMAP2_DISPLAY_PANEL_PICODLP_H
+
+/* Commands used for configuring picodlp panel */
+
+#define MAIN_STATUS			0x03
+#define PBC_CONTROL			0x08
+#define INPUT_SOURCE			0x0B
+#define INPUT_RESOLUTION		0x0C
+#define DATA_FORMAT			0x0D
+#define IMG_ROTATION			0x0E
+#define LONG_FLIP			0x0F
+#define SHORT_FLIP			0x10
+#define TEST_PAT_SELECT			0x11
+#define R_DRIVE_CURRENT			0x12
+#define G_DRIVE_CURRENT			0x13
+#define B_DRIVE_CURRENT			0x14
+#define READ_REG_SELECT			0x15
+#define RGB_DRIVER_ENABLE		0x16
+
+#define CPU_IF_MODE			0x18
+#define FRAME_RATE			0x19
+#define CPU_IF_SYNC_METHOD		0x1A
+#define CPU_IF_SOF			0x1B
+#define CPU_IF_EOF			0x1C
+#define CPU_IF_SLEEP			0x1D
+
+#define SEQUENCE_MODE			0x1E
+#define SOFT_RESET			0x1F
+#define FRONT_END_RESET			0x21
+#define AUTO_PWR_ENABLE			0x22
+
+#define VSYNC_LINE_DELAY		0x23
+#define CPU_PI_HORIZ_START		0x24
+#define CPU_PI_VERT_START		0x25
+#define CPU_PI_HORIZ_WIDTH		0x26
+#define CPU_PI_VERT_HEIGHT		0x27
+
+#define PIXEL_MASK_CROP			0x28
+#define CROP_FIRST_LINE			0x29
+#define CROP_LAST_LINE			0x2A
+#define CROP_FIRST_PIXEL		0x2B
+#define CROP_LAST_PIXEL			0x2C
+#define DMD_PARK_TRIGGER		0x2D
+
+#define MISC_REG			0x30
+
+/* AGC registers */
+#define AGC_CTRL			0x50
+#define AGC_CLIPPED_PIXS		0x55
+#define AGC_BRIGHT_PIXS			0x56
+#define AGC_BG_PIXS			0x57
+#define AGC_SAFETY_MARGIN		0x17
+
+/* Color Coordinate Adjustment registers */
+#define CCA_ENABLE		0x5E
+#define CCA_C1A			0x5F
+#define CCA_C1B			0x60
+#define CCA_C1C			0x61
+#define CCA_C2A			0x62
+#define CCA_C2B			0x63
+#define CCA_C2C			0x64
+#define CCA_C3A			0x65
+#define CCA_C3B			0x66
+#define CCA_C3C			0x67
+#define CCA_C7A			0x71
+#define CCA_C7B			0x72
+#define CCA_C7C			0x73
+
+/**
+ * DLP Pico Processor 2600 comes with flash
+ * We can do DMA operations from flash for accessing Look Up Tables
+ */
+#define DMA_STATUS			0x100
+#define FLASH_ADDR_BYTES		0x74
+#define FLASH_DUMMY_BYTES		0x75
+#define FLASH_WRITE_BYTES		0x76
+#define FLASH_READ_BYTES		0x77
+#define FLASH_OPCODE			0x78
+#define FLASH_START_ADDR		0x79
+#define FLASH_DUMMY2			0x7A
+#define FLASH_WRITE_DATA		0x7B
+
+#define TEMPORAL_DITH_DISABLE		0x7E
+#define SEQ_CONTROL			0x82
+#define SEQ_VECTOR			0x83
+
+/* DMD is Digital Micromirror Device */
+#define DMD_BLOCK_COUNT			0x84
+#define DMD_VCC_CONTROL			0x86
+#define DMD_PARK_PULSE_COUNT		0x87
+#define DMD_PARK_PULSE_WIDTH		0x88
+#define DMD_PARK_DELAY			0x89
+#define DMD_SHADOW_ENABLE		0x8E
+#define SEQ_STATUS			0x8F
+#define FLASH_CLOCK_CONTROL		0x98
+#define DMD_PARK			0x2D
+
+#define SDRAM_BIST_ENABLE		0x46
+#define DDR_DRIVER_STRENGTH		0x9A
+#define SDC_ENABLE			0x9D
+#define SDC_BUFF_SWAP_DISABLE		0xA3
+#define CURTAIN_CONTROL			0xA6
+#define DDR_BUS_SWAP_ENABLE		0xA7
+#define DMD_TRC_ENABLE			0xA8
+#define DMD_BUS_SWAP_ENABLE		0xA9
+
+#define ACTGEN_ENABLE			0xAE
+#define ACTGEN_CONTROL			0xAF
+#define ACTGEN_HORIZ_BP			0xB0
+#define ACTGEN_VERT_BP			0xB1
+
+/* Look Up Table access */
+#define CMT_SPLASH_LUT_START_ADDR	0xFA
+#define CMT_SPLASH_LUT_DEST_SELECT	0xFB
+#define CMT_SPLASH_LUT_DATA		0xFC
+#define SEQ_RESET_LUT_START_ADDR	0xFD
+#define SEQ_RESET_LUT_DEST_SELECT	0xFE
+#define SEQ_RESET_LUT_DATA		0xFF
+
+/* Input source definitions */
+#define PARALLEL_RGB		0
+#define INT_TEST_PATTERN	1
+#define SPLASH_SCREEN		2
+#define CPU_INTF		3
+#define BT656			4
+
+/* Standard input resolution definitions */
+#define QWVGA_LANDSCAPE		3	/* (427h*240v) */
+#define WVGA_864_LANDSCAPE	21	/* (864h*480v) */
+#define WVGA_DMD_OPTICAL_TEST	35	/* (608h*684v) */
+
+/* Standard data format definitions */
+#define RGB565			0
+#define RGB666			1
+#define RGB888			2
+
+/* Test Pattern definitions */
+#define TPG_CHECKERBOARD	0
+#define TPG_BLACK		1
+#define TPG_WHITE		2
+#define TPG_RED			3
+#define TPG_BLUE		4
+#define TPG_GREEN		5
+#define TPG_VLINES_BLACK	6
+#define TPG_HLINES_BLACK	7
+#define TPG_VLINES_ALT		8
+#define TPG_HLINES_ALT		9
+#define TPG_DIAG_LINES		10
+#define TPG_GREYRAMP_VERT	11
+#define TPG_GREYRAMP_HORIZ	12
+#define TPG_ANSI_CHECKERBOARD	13
+
+/* sequence mode definitions */
+#define SEQ_FREE_RUN		0
+#define SEQ_LOCK		1
+
+/* curtain color definitions */
+#define CURTAIN_BLACK		0
+#define CURTAIN_RED		1
+#define CURTAIN_GREEN		2
+#define CURTAIN_BLUE		3
+#define CURTAIN_YELLOW		4
+#define CURTAIN_MAGENTA		5
+#define CURTAIN_CYAN		6
+#define CURTAIN_WHITE		7
+
+/* LUT definitions */
+#define CMT_LUT_NONE		0
+#define CMT_LUT_GREEN		1
+#define CMT_LUT_RED		2
+#define CMT_LUT_BLUE		3
+#define CMT_LUT_ALL		4
+#define SPLASH_LUT		5
+
+#define SEQ_LUT_NONE		0
+#define SEQ_DRC_LUT_0		1
+#define SEQ_DRC_LUT_1		2
+#define SEQ_DRC_LUT_2		3
+#define SEQ_DRC_LUT_3		4
+#define SEQ_SEQ_LUT		5
+#define SEQ_DRC_LUT_ALL		6
+#define WPC_PROGRAM_LUT		7
+
+#define BITSTREAM_START_ADDR		0x00000000
+#define BITSTREAM_SIZE			0x00040000
+
+#define WPC_FW_0_START_ADDR		0x00040000
+#define WPC_FW_0_SIZE			0x00000ce8
+
+#define SEQUENCE_0_START_ADDR		0x00044000
+#define SEQUENCE_0_SIZE			0x00001000
+
+#define SEQUENCE_1_START_ADDR		0x00045000
+#define SEQUENCE_1_SIZE			0x00000d10
+
+#define SEQUENCE_2_START_ADDR		0x00046000
+#define SEQUENCE_2_SIZE			0x00000d10
+
+#define SEQUENCE_3_START_ADDR		0x00047000
+#define SEQUENCE_3_SIZE			0x00000d10
+
+#define SEQUENCE_4_START_ADDR		0x00048000
+#define SEQUENCE_4_SIZE			0x00000d10
+
+#define SEQUENCE_5_START_ADDR		0x00049000
+#define SEQUENCE_5_SIZE			0x00000d10
+
+#define SEQUENCE_6_START_ADDR		0x0004a000
+#define SEQUENCE_6_SIZE			0x00000d10
+
+#define CMT_LUT_0_START_ADDR		0x0004b200
+#define CMT_LUT_0_SIZE			0x00000600
+
+#define CMT_LUT_1_START_ADDR		0x0004b800
+#define CMT_LUT_1_SIZE			0x00000600
+
+#define CMT_LUT_2_START_ADDR		0x0004be00
+#define CMT_LUT_2_SIZE			0x00000600
+
+#define CMT_LUT_3_START_ADDR		0x0004c400
+#define CMT_LUT_3_SIZE			0x00000600
+
+#define CMT_LUT_4_START_ADDR		0x0004ca00
+#define CMT_LUT_4_SIZE			0x00000600
+
+#define CMT_LUT_5_START_ADDR		0x0004d000
+#define CMT_LUT_5_SIZE			0x00000600
+
+#define CMT_LUT_6_START_ADDR		0x0004d600
+#define CMT_LUT_6_SIZE			0x00000600
+
+#define DRC_TABLE_0_START_ADDR		0x0004dc00
+#define DRC_TABLE_0_SIZE		0x00000100
+
+#define SPLASH_0_START_ADDR		0x0004dd00
+#define SPLASH_0_SIZE			0x00032280
+
+#define SEQUENCE_7_START_ADDR		0x00080000
+#define SEQUENCE_7_SIZE			0x00000d10
+
+#define SEQUENCE_8_START_ADDR		0x00081800
+#define SEQUENCE_8_SIZE			0x00000d10
+
+#define SEQUENCE_9_START_ADDR		0x00083000
+#define SEQUENCE_9_SIZE			0x00000d10
+
+#define CMT_LUT_7_START_ADDR		0x0008e000
+#define CMT_LUT_7_SIZE			0x00000600
+
+#define CMT_LUT_8_START_ADDR		0x0008e800
+#define CMT_LUT_8_SIZE			0x00000600
+
+#define CMT_LUT_9_START_ADDR		0x0008f000
+#define CMT_LUT_9_SIZE			0x00000600
+
+#define SPLASH_1_START_ADDR		0x0009a000
+#define SPLASH_1_SIZE			0x00032280
+
+#define SPLASH_2_START_ADDR		0x000cd000
+#define SPLASH_2_SIZE			0x00032280
+
+#define SPLASH_3_START_ADDR		0x00100000
+#define SPLASH_3_SIZE			0x00032280
+
+#define OPT_SPLASH_0_START_ADDR		0x00134000
+#define OPT_SPLASH_0_SIZE		0x000cb100
+
+#endif