diff mbox

[v2,04/18] GPIO: OMAP: Fix pwrdm_post_transition call sequence

Message ID 1308111776-29130-3-git-send-email-tarun.kanti@ti.com (mailing list archive)
State Changes Requested
Delegated to: Kevin Hilman
Headers show

Commit Message

Tarun Kanti DebBarma June 15, 2011, 4:22 a.m. UTC
From: Charulatha V <charu@ti.com>

The context lost count is modified in omap_sram_idle() path when
pwrdm_post_transition() is called. But pwrdm_post_transition() is called
only after omap_gpio_resume_after_idle() is called. Correct this so that
context lost count is modified before calling omap_gpio_resume_after_idle().

This would be useful when OMAP GPIO save/restore context is called by
the OMAP GPIO driver itself.

Signed-off-by: Charulatha V <charu@ti.com>
---
 arch/arm/mach-omap2/pm34xx.c |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c155c9d..51d5a5c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -375,7 +375,6 @@  void omap_sram_idle(void)
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
 		return;
 	}
-	pwrdm_pre_transition();
 
 	/* NEON control */
 	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
@@ -398,6 +397,8 @@  void omap_sram_idle(void)
 			if (!console_trylock())
 				goto console_still_active;
 
+	pwrdm_pre_transition();
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
@@ -467,6 +468,8 @@  void omap_sram_idle(void)
 	}
 	omap3_intc_resume_idle();
 
+	pwrdm_post_transition();
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
@@ -490,8 +493,6 @@  console_still_active:
 		omap3_disable_io_chain();
 	}
 
-	pwrdm_post_transition();
-
 	clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }