diff mbox

[RFC,6/8] davinci: da850: add remoteproc dsp device

Message ID 1308640714-17961-7-git-send-email-ohad@wizery.com (mailing list archive)
State RFC, archived
Delegated to: Tony Lindgren
Headers show

Commit Message

Ohad Ben Cohen June 21, 2011, 7:18 a.m. UTC
From: Mark Grosen <mgrosen@ti.com>

Add davinci remoteproc device for the da850's C674x dsp remote
processor, and support it on the da850-evm and omapl138-hawk boards.

Signed-off-by: Mark Grosen <mgrosen@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
It'd be nice to split this patch to the different components it changes,
but it's probably not so important at this early stage.

 arch/arm/mach-davinci/board-da850-evm.c     |    4 ++++
 arch/arm/mach-davinci/board-omapl138-hawk.c |    4 ++++
 arch/arm/mach-davinci/da850.c               |   14 ++++++++++++++
 arch/arm/mach-davinci/devices-da8xx.c       |   15 +++++++++++++++
 arch/arm/mach-davinci/include/mach/da8xx.h  |    1 +
 5 files changed, 38 insertions(+), 0 deletions(-)

Comments

Sergei Shtylyov June 28, 2011, 10:18 a.m. UTC | #1
Hello.

On 21.06.2011 11:18, Ohad Ben-Cohen wrote:

> From: Mark Grosen <mgrosen@ti.com>

> Add davinci remoteproc device for the da850's C674x dsp remote
> processor, and support it on the da850-evm and omapl138-hawk boards.

> Signed-off-by: Mark Grosen<mgrosen@ti.com>
> Signed-off-by: Ohad Ben-Cohen<ohad@wizery.com>
[...]

> diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
> index 133aac4..9280b1e 100644
> --- a/arch/arm/mach-davinci/da850.c
> +++ b/arch/arm/mach-davinci/da850.c
> @@ -74,6 +74,13 @@ static struct clk pll0_aux_clk = {
>   	.flags		= CLK_PLL | PRE_PLL,
>   };
>
> +static struct clk pll0_sysclk1 = {
> +	.name		= "pll0_sysclk1",
> +	.parent		= &pll0_clk,
> +	.flags		= CLK_PLL,
> +	.div_reg	= PLLDIV1,
> +};
> +
>   static struct clk pll0_sysclk2 = {
>   	.name		= "pll0_sysclk2",
>   	.parent		= &pll0_clk,
> @@ -373,6 +380,12 @@ static struct clk spi1_clk = {
>   	.flags		= DA850_CLK_ASYNC3,
>   };
>
> +static struct clk dsp_clk = {
> +	.name		= "dsp",
> +	.parent		= &pll0_sysclk1,
> +	.lpsc		= DA8XX_LPSC0_GEM,
> +};
> +
>   static struct clk_lookup da850_clks[] = {
>   	CLK(NULL,		"ref",		&ref_clk),
>   	CLK(NULL,		"pll0",		&pll0_clk),
> @@ -419,6 +432,7 @@ static struct clk_lookup da850_clks[] = {
>   	CLK(NULL,		"usb20",	&usb20_clk),
>   	CLK("spi_davinci.0",	NULL,		&spi0_clk),
>   	CLK("spi_davinci.1",	NULL,		&spi1_clk),
> +	CLK(NULL,		"dsp",		&dsp_clk),
>   	CLK(NULL,		NULL,		NULL),
>   };

    How about also adding the clock for DA830?

> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
> index fc4e98e..3becfd1 100644
> --- a/arch/arm/mach-davinci/devices-da8xx.c
> +++ b/arch/arm/mach-davinci/devices-da8xx.c
[...]
> @@ -647,6 +648,20 @@ int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
>   	da850_mmcsd1_device.dev.platform_data = config;
>   	return platform_device_register(&da850_mmcsd1_device);
>   }
> +
> +int __init da850_register_rproc(void)

    Please rename to da8xx_register_rproc() -- there's nothing DA850-specific 
here.

> +{
> +	struct platform_device *rproc;
> +	struct davinci_rproc_pdata rproc_pdata = {
> +		.name		= "dsp",
> +		.firmware	= "davinci-dsp.bin",

    Isn't the firmware DA8xx-specific?

WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index a7b41bf..6b35f0a 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1176,6 +1176,10 @@  static __init void da850_evm_init(void)
 	i2c_register_board_info(1, da850_evm_i2c_devices,
 			ARRAY_SIZE(da850_evm_i2c_devices));
 
+	ret = da850_register_rproc();
+	if (ret)
+		pr_warning("dsp/rproc registration failed: %d\n", ret);
+
 	/*
 	 * shut down uart 0 and 1; they are not used on the board and
 	 * accessing them causes endless "too much work in irq53" messages
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 67c38d0..52c8434 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -319,6 +319,10 @@  static __init void omapl138_hawk_init(void)
 		pr_warning("omapl138_hawk_init: "
 			"watchdog registration failed: %d\n",
 			ret);
+
+	ret = da850_register_rproc();
+	if (ret)
+		pr_warning("dsp/rproc registration failed: %d\n", ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 133aac4..9280b1e 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -74,6 +74,13 @@  static struct clk pll0_aux_clk = {
 	.flags		= CLK_PLL | PRE_PLL,
 };
 
+static struct clk pll0_sysclk1 = {
+	.name		= "pll0_sysclk1",
+	.parent		= &pll0_clk,
+	.flags		= CLK_PLL,
+	.div_reg	= PLLDIV1,
+};
+
 static struct clk pll0_sysclk2 = {
 	.name		= "pll0_sysclk2",
 	.parent		= &pll0_clk,
@@ -373,6 +380,12 @@  static struct clk spi1_clk = {
 	.flags		= DA850_CLK_ASYNC3,
 };
 
+static struct clk dsp_clk = {
+	.name		= "dsp",
+	.parent		= &pll0_sysclk1,
+	.lpsc		= DA8XX_LPSC0_GEM,
+};
+
 static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"ref",		&ref_clk),
 	CLK(NULL,		"pll0",		&pll0_clk),
@@ -419,6 +432,7 @@  static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
+	CLK(NULL,		"dsp",		&dsp_clk),
 	CLK(NULL,		NULL,		NULL),
 };
 
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index fc4e98e..3becfd1 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -20,6 +20,7 @@ 
 #include <mach/time.h>
 #include <mach/da8xx.h>
 #include <mach/cpuidle.h>
+#include <mach/remoteproc.h>
 
 #include "clock.h"
 
@@ -647,6 +648,20 @@  int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
 	da850_mmcsd1_device.dev.platform_data = config;
 	return platform_device_register(&da850_mmcsd1_device);
 }
+
+int __init da850_register_rproc(void)
+{
+	struct platform_device *rproc;
+	struct davinci_rproc_pdata rproc_pdata = {
+		.name		= "dsp",
+		.firmware	= "davinci-dsp.bin",
+		.clk_name	= "dsp",
+	};
+
+	rproc = platform_device_register_data(NULL, "davinci-rproc", 0,
+					    &rproc_pdata, sizeof(rproc_pdata));
+	return PTR_RET(rproc);
+};
 #endif
 
 static struct resource da8xx_rtc_resources[] = {
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index ad64da7..a6f024f 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -74,6 +74,7 @@  void __init da850_init(void);
 
 int da830_register_edma(struct edma_rsv_info *rsv);
 int da850_register_edma(struct edma_rsv_info *rsv[2]);
+int da850_register_rproc(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_spi(int instance, struct spi_board_info *info, unsigned len);
 int da8xx_register_watchdog(void);