| Message ID | 1342189185-5306-7-git-send-email-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Friday 13 July 2012 07:49 PM, Tero Kristo wrote: > Voltdm, pwrdm, clkdm, hwmod and clk usecounts are now separeted to > their own file, 'usecount'. This file shows the usecounts for every > active domain and their children recursively. 'count' file now only > shows power state counts for powerdomains. The only comment I had on this patch was what I also said in response to PATCH 1/8 about keeping the clock usecounts separate if possible. voltdm, pwrdm, clkdm and hwmod are OMAP specific frameworks (and so is clock framework for now) but sooner than later we would move to using COMMON clock framework and then supporting the clock usecounts in /debug/pm_debug/usecount would not be possible. > > This patch also provices a way to do printk dumps from kernel code, > by calling the pm_dbg_dump_X functions. The plan is to call these > functions once an error condition is detected, e.g. failed suspend. > > Signed-off-by: Tero Kristo<t-kristo@ti.com> > Cc: Paul Walmsley<paul@pwsan.com> > Cc: Kevin Hilman<khilman@ti.com> > --- > arch/arm/mach-omap2/pm-debug.c | 128 ++++++++++++++++++++++++++++++++++------ > arch/arm/mach-omap2/pm.h | 6 ++ > 2 files changed, 115 insertions(+), 19 deletions(-) > > diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c > index 814bcd9..cfc46a8 100644 > --- a/arch/arm/mach-omap2/pm-debug.c > +++ b/arch/arm/mach-omap2/pm-debug.c > @@ -51,6 +51,7 @@ static int pm_dbg_init(void); > enum { > DEBUG_FILE_COUNTERS = 0, > DEBUG_FILE_TIMERS, > + DEBUG_FILE_USECOUNT, > }; > > static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { > @@ -75,23 +76,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) > pwrdm->timer = t; > } > > -static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user) > -{ > - struct seq_file *s = (struct seq_file *)user; > - > - if (strcmp(clkdm->name, "emu_clkdm") == 0 || > - strcmp(clkdm->name, "wkup_clkdm") == 0 || > - strncmp(clkdm->name, "dpll", 4) == 0) > - return 0; > - > - seq_printf(s, "%s->%s (%d)", clkdm->name, > - clkdm->pwrdm.ptr->name, > - atomic_read(&clkdm->usecount)); > - seq_printf(s, "\n"); > - > - return 0; > -} > - > static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user) > { > struct seq_file *s = (struct seq_file *)user; > @@ -145,11 +129,112 @@ static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user) > return 0; > } > > +static struct voltagedomain *parent_voltdm; > +static struct powerdomain *parent_pwrdm; > +static struct clockdomain *parent_clkdm; > + > +#define PM_DBG_PRINT(s, fmt, args...) \ > + { \ > + if (s) \ > + seq_printf(s, fmt, ## args); \ > + else \ > + pr_info(fmt, ## args); \ > + } > + > +static int _pm_dbg_dump_clk(struct clk *clk, void *user) > +{ > + struct seq_file *s = user; > + > + if (clk->clkdm == parent_clkdm&& clk->usecount&& !clk->autoidle) > + PM_DBG_PRINT(s, " ck:%s: %d\n", clk->name, clk->usecount); > + > + return 0; > +} > + > +static int _pm_dbg_dump_hwmod(struct omap_hwmod *oh, void *user) > +{ > + struct seq_file *s = user; > + > + if (oh->clkdm != parent_clkdm) > + return 0; > + > + if (oh->_state != _HWMOD_STATE_ENABLED) > + return 0; > + > + PM_DBG_PRINT(s, " oh:%s: enabled\n", oh->name); > + > + return 0; > +} > + > +static int _pm_dbg_dump_clkdm(struct clockdomain *clkdm, void *user) > +{ > + struct seq_file *s = user; > + u32 usecount; > + > + if (clkdm->pwrdm.ptr == parent_pwrdm) { > + usecount = atomic_read(&clkdm->usecount); > + if (usecount) { > + PM_DBG_PRINT(s, " cd:%s: %d\n", clkdm->name, > + usecount); > + parent_clkdm = clkdm; > + omap_hwmod_for_each(_pm_dbg_dump_hwmod, s); > + omap_clk_for_each(_pm_dbg_dump_clk, s); > + } > + } > + return 0; > +} > + > +static int _pm_dbg_dump_pwrdm(struct powerdomain *pwrdm, void *user) > +{ > + struct seq_file *s = user; > + u32 usecount; > + > + if (pwrdm->voltdm.ptr == parent_voltdm) { > + usecount = atomic_read(&pwrdm->usecount); > + if (usecount) { > + PM_DBG_PRINT(s, " pd:%s: %d\n", pwrdm->name, usecount); > + parent_pwrdm = pwrdm; > + clkdm_for_each(_pm_dbg_dump_clkdm, s); > + } > + } > + return 0; > +} > + > +void pm_dbg_dump_pwrdm(struct powerdomain *pwrdm) > +{ > + pr_info("pd:%s: %d\n", pwrdm->name, atomic_read(&pwrdm->usecount)); > + parent_pwrdm = pwrdm; > + clkdm_for_each(_pm_dbg_dump_clkdm, NULL); > +} > + > +void pm_dbg_dump_voltdm(struct voltagedomain *voltdm) > +{ > + pr_info("vd:%s: %d\n", voltdm->name, atomic_read(&voltdm->usecount)); > + parent_voltdm = voltdm; > + pwrdm_for_each(_pm_dbg_dump_pwrdm, NULL); > +} > + > +static int _voltdm_dbg_show_counters(struct voltagedomain *voltdm, void *user) > +{ > + struct seq_file *s = user; > + > + seq_printf(s, "vd:%s: %d\n", voltdm->name, > + atomic_read(&voltdm->usecount)); > + > + parent_voltdm = voltdm; > + pwrdm_for_each(_pm_dbg_dump_pwrdm, s); > + return 0; > +} > + > +static int pm_dbg_show_usecount(struct seq_file *s, void *unused) > +{ > + voltdm_for_each(_voltdm_dbg_show_counters, s); > + return 0; > +} > + > static int pm_dbg_show_counters(struct seq_file *s, void *unused) > { > pwrdm_for_each(pwrdm_dbg_show_counter, s); > - clkdm_for_each(clkdm_dbg_show_counter, s); > - > return 0; > } > > @@ -162,6 +247,9 @@ static int pm_dbg_show_timers(struct seq_file *s, void *unused) > static int pm_dbg_open(struct inode *inode, struct file *file) > { > switch ((int)inode->i_private) { > + case DEBUG_FILE_USECOUNT: > + return single_open(file, pm_dbg_show_usecount, > + &inode->i_private); > case DEBUG_FILE_COUNTERS: > return single_open(file, pm_dbg_show_counters, > &inode->i_private); > @@ -271,6 +359,8 @@ static int __init pm_dbg_init(void) > d, (void *)DEBUG_FILE_COUNTERS,&debug_fops); > (void) debugfs_create_file("time", S_IRUGO, > d, (void *)DEBUG_FILE_TIMERS,&debug_fops); > + (void) debugfs_create_file("usecount", S_IRUGO, > + d, (void *)DEBUG_FILE_USECOUNT,&debug_fops); > > pwrdm_for_each(pwrdms_setup, (void *)d); > > diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h > index 7856489..312f2de 100644 > --- a/arch/arm/mach-omap2/pm.h > +++ b/arch/arm/mach-omap2/pm.h > @@ -41,10 +41,16 @@ static inline int omap4_opp_init(void) > extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); > extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); > > +struct clk; > + > #ifdef CONFIG_PM_DEBUG > extern u32 enable_off_mode; > +extern void pm_dbg_dump_pwrdm(struct powerdomain *pwrdm); > +extern void pm_dbg_dump_voltdm(struct voltagedomain *voltdm); > #else > #define enable_off_mode 0 > +static inline void pm_dbg_dump_pwrdm(struct powerdomain *pwrdm) { } > +static inline void pm_dbg_dump_voltdm(struct voltagedomain *voltdm) { } > #endif > > #if defined(CONFIG_PM_DEBUG)&& defined(CONFIG_DEBUG_FS) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 2012-07-16 at 16:20 +0530, Rajendra Nayak wrote: > On Friday 13 July 2012 07:49 PM, Tero Kristo wrote: > > Voltdm, pwrdm, clkdm, hwmod and clk usecounts are now separeted to > > their own file, 'usecount'. This file shows the usecounts for every > > active domain and their children recursively. 'count' file now only > > shows power state counts for powerdomains. > > The only comment I had on this patch was what I also said in response > to PATCH 1/8 about keeping the clock usecounts separate if possible. > voltdm, pwrdm, clkdm and hwmod are OMAP specific frameworks (and so is > clock framework for now) but sooner than later we would move to using > COMMON clock framework and then supporting the clock usecounts in > /debug/pm_debug/usecount would not be possible. Well, I guess we can move these patches to a separate debug set for now in that case, and people who want to use them can do that. > > > > > This patch also provices a way to do printk dumps from kernel code, > > by calling the pm_dbg_dump_X functions. The plan is to call these > > functions once an error condition is detected, e.g. failed suspend. ^ | This part is the main motivation for this patch imo. -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday 16 July 2012 05:15 PM, Tero Kristo wrote: >>> > > >>> > > This patch also provices a way to do printk dumps from kernel code, >>> > > by calling the pm_dbg_dump_X functions. The plan is to call these >>> > > functions once an error condition is detected, e.g. failed suspend. > ^ > | > This part is the main motivation for this patch imo. ah, okay. I missed that part completely. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Tero Kristo <t-kristo@ti.com> writes: > Voltdm, pwrdm, clkdm, hwmod and clk usecounts are now separeted to > their own file, 'usecount'. This file shows the usecounts for every > active domain and their children recursively. 'count' file now only > shows power state counts for powerdomains. > > This patch also provices a way to do printk dumps from kernel code, > by calling the pm_dbg_dump_X functions. The plan is to call these > functions once an error condition is detected, e.g. failed suspend. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Cc: Paul Walmsley <paul@pwsan.com> > Cc: Kevin Hilman <khilman@ti.com> I think we should separate out the debug stuff as a separate patch set. Where I want to go with PM debug is away from in-kernel debug prints and towards using tracepoints. We have tracepoints in the clock code that correspond to usecounts, but we need them in the clkdm, pwrdm and voltdm code as well. With that, you can use userspace tools (perf, ftrace) to trace a problem (e.g. failed suspend) and see voltdm/pwrdm/clkdm/clks are on when they shouldn't be. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 2012-07-27 at 12:55 -0700, Kevin Hilman wrote: > Tero Kristo <t-kristo@ti.com> writes: > > > Voltdm, pwrdm, clkdm, hwmod and clk usecounts are now separeted to > > their own file, 'usecount'. This file shows the usecounts for every > > active domain and their children recursively. 'count' file now only > > shows power state counts for powerdomains. > > > > This patch also provices a way to do printk dumps from kernel code, > > by calling the pm_dbg_dump_X functions. The plan is to call these > > functions once an error condition is detected, e.g. failed suspend. > > > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > > Cc: Paul Walmsley <paul@pwsan.com> > > Cc: Kevin Hilman <khilman@ti.com> > > I think we should separate out the debug stuff as a separate patch set. > > Where I want to go with PM debug is away from in-kernel debug prints and > towards using tracepoints. We have tracepoints in the clock code that > correspond to usecounts, but we need them in the clkdm, pwrdm and voltdm > code as well. With that, you can use userspace tools (perf, ftrace) to > trace a problem (e.g. failed suspend) and see voltdm/pwrdm/clkdm/clks > are on when they shouldn't be. Yes, I can split out the debug stuff from this set for next rev. I'll also take a look at the tracepoints if they can be used reasonably for this purpose. We can add tracepoints for failed suspend for each powerdomain, but are tracepoints a good way to do this kind of recursive dumps (well, we could maybe register a trace event recursively from clkdm + clk code if a powerdomain fails to transition.) -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 814bcd9..cfc46a8 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -51,6 +51,7 @@ static int pm_dbg_init(void); enum { DEBUG_FILE_COUNTERS = 0, DEBUG_FILE_TIMERS, + DEBUG_FILE_USECOUNT, }; static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { @@ -75,23 +76,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) pwrdm->timer = t; } -static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user) -{ - struct seq_file *s = (struct seq_file *)user; - - if (strcmp(clkdm->name, "emu_clkdm") == 0 || - strcmp(clkdm->name, "wkup_clkdm") == 0 || - strncmp(clkdm->name, "dpll", 4) == 0) - return 0; - - seq_printf(s, "%s->%s (%d)", clkdm->name, - clkdm->pwrdm.ptr->name, - atomic_read(&clkdm->usecount)); - seq_printf(s, "\n"); - - return 0; -} - static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user) { struct seq_file *s = (struct seq_file *)user; @@ -145,11 +129,112 @@ static int pwrdm_dbg_show_timer(struct powerdomain *pwrdm, void *user) return 0; } +static struct voltagedomain *parent_voltdm; +static struct powerdomain *parent_pwrdm; +static struct clockdomain *parent_clkdm; + +#define PM_DBG_PRINT(s, fmt, args...) \ + { \ + if (s) \ + seq_printf(s, fmt, ## args); \ + else \ + pr_info(fmt, ## args); \ + } + +static int _pm_dbg_dump_clk(struct clk *clk, void *user) +{ + struct seq_file *s = user; + + if (clk->clkdm == parent_clkdm && clk->usecount && !clk->autoidle) + PM_DBG_PRINT(s, " ck:%s: %d\n", clk->name, clk->usecount); + + return 0; +} + +static int _pm_dbg_dump_hwmod(struct omap_hwmod *oh, void *user) +{ + struct seq_file *s = user; + + if (oh->clkdm != parent_clkdm) + return 0; + + if (oh->_state != _HWMOD_STATE_ENABLED) + return 0; + + PM_DBG_PRINT(s, " oh:%s: enabled\n", oh->name); + + return 0; +} + +static int _pm_dbg_dump_clkdm(struct clockdomain *clkdm, void *user) +{ + struct seq_file *s = user; + u32 usecount; + + if (clkdm->pwrdm.ptr == parent_pwrdm) { + usecount = atomic_read(&clkdm->usecount); + if (usecount) { + PM_DBG_PRINT(s, " cd:%s: %d\n", clkdm->name, + usecount); + parent_clkdm = clkdm; + omap_hwmod_for_each(_pm_dbg_dump_hwmod, s); + omap_clk_for_each(_pm_dbg_dump_clk, s); + } + } + return 0; +} + +static int _pm_dbg_dump_pwrdm(struct powerdomain *pwrdm, void *user) +{ + struct seq_file *s = user; + u32 usecount; + + if (pwrdm->voltdm.ptr == parent_voltdm) { + usecount = atomic_read(&pwrdm->usecount); + if (usecount) { + PM_DBG_PRINT(s, " pd:%s: %d\n", pwrdm->name, usecount); + parent_pwrdm = pwrdm; + clkdm_for_each(_pm_dbg_dump_clkdm, s); + } + } + return 0; +} + +void pm_dbg_dump_pwrdm(struct powerdomain *pwrdm) +{ + pr_info("pd:%s: %d\n", pwrdm->name, atomic_read(&pwrdm->usecount)); + parent_pwrdm = pwrdm; + clkdm_for_each(_pm_dbg_dump_clkdm, NULL); +} + +void pm_dbg_dump_voltdm(struct voltagedomain *voltdm) +{ + pr_info("vd:%s: %d\n", voltdm->name, atomic_read(&voltdm->usecount)); + parent_voltdm = voltdm; + pwrdm_for_each(_pm_dbg_dump_pwrdm, NULL); +} + +static int _voltdm_dbg_show_counters(struct voltagedomain *voltdm, void *user) +{ + struct seq_file *s = user; + + seq_printf(s, "vd:%s: %d\n", voltdm->name, + atomic_read(&voltdm->usecount)); + + parent_voltdm = voltdm; + pwrdm_for_each(_pm_dbg_dump_pwrdm, s); + return 0; +} + +static int pm_dbg_show_usecount(struct seq_file *s, void *unused) +{ + voltdm_for_each(_voltdm_dbg_show_counters, s); + return 0; +} + static int pm_dbg_show_counters(struct seq_file *s, void *unused) { pwrdm_for_each(pwrdm_dbg_show_counter, s); - clkdm_for_each(clkdm_dbg_show_counter, s); - return 0; } @@ -162,6 +247,9 @@ static int pm_dbg_show_timers(struct seq_file *s, void *unused) static int pm_dbg_open(struct inode *inode, struct file *file) { switch ((int)inode->i_private) { + case DEBUG_FILE_USECOUNT: + return single_open(file, pm_dbg_show_usecount, + &inode->i_private); case DEBUG_FILE_COUNTERS: return single_open(file, pm_dbg_show_counters, &inode->i_private); @@ -271,6 +359,8 @@ static int __init pm_dbg_init(void) d, (void *)DEBUG_FILE_COUNTERS, &debug_fops); (void) debugfs_create_file("time", S_IRUGO, d, (void *)DEBUG_FILE_TIMERS, &debug_fops); + (void) debugfs_create_file("usecount", S_IRUGO, + d, (void *)DEBUG_FILE_USECOUNT, &debug_fops); pwrdm_for_each(pwrdms_setup, (void *)d); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 7856489..312f2de 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -41,10 +41,16 @@ static inline int omap4_opp_init(void) extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); +struct clk; + #ifdef CONFIG_PM_DEBUG extern u32 enable_off_mode; +extern void pm_dbg_dump_pwrdm(struct powerdomain *pwrdm); +extern void pm_dbg_dump_voltdm(struct voltagedomain *voltdm); #else #define enable_off_mode 0 +static inline void pm_dbg_dump_pwrdm(struct powerdomain *pwrdm) { } +static inline void pm_dbg_dump_voltdm(struct voltagedomain *voltdm) { } #endif #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
Voltdm, pwrdm, clkdm, hwmod and clk usecounts are now separeted to their own file, 'usecount'. This file shows the usecounts for every active domain and their children recursively. 'count' file now only shows power state counts for powerdomains. This patch also provices a way to do printk dumps from kernel code, by calling the pm_dbg_dump_X functions. The plan is to call these functions once an error condition is detected, e.g. failed suspend. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> --- arch/arm/mach-omap2/pm-debug.c | 128 ++++++++++++++++++++++++++++++++++------ arch/arm/mach-omap2/pm.h | 6 ++ 2 files changed, 115 insertions(+), 19 deletions(-)